Edimax BR-6435nD

abgn (AN600)
wireless router
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Edimax BR-6435nD
FCC ID	NDD9564351207
Type	wireless router
CPU1	Ralink RT3352
CPU1 Type	MIPS 24KEc
CPU1 Speed	not specified
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	Winbond W9825G6JH-6
ETH chip1	Ralink RT3352
Switch	Ralink RT3352
Ethernet Port Count	1-100MbE-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	5 VDC, 2 A
Connector type	barrel
Other
Default IP address: 192.168.2.1 the IP 192.168.2.1 is used by 297 additional devices of which 58 are Edimax devices Default login user: admin Default login password: 1234 admin:1234 credentials used by 185 additional devices of which 73 are Edimax devices
Manuf/OEM/ODM	Edimax
Retail
FCC approval date	27 September 2012
Radio 1
Chip1	Ralink RT3352
Wireless interface OUI	none specified
Antenna Connector Type	U.FL, RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Ralink RT5572
Wireless interface OUI	none specified
Antenna Connector Type	U.FL, RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Edimax device with specifications, see Edimax.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

The FCC test report lists the following models as covered by this FCC ID..

• BR-6435ND
• GR-435ND
• BR-6435nD
• BR-6435nD V2

Both radios are assumed to be connected to the internal U.FL connectors (and thus, also the external RP-SMA connectors). Some models probably have integral antennas.

"1244-01000818-50Z" is silkscreened on the board in the FCC internal photos.