Edimax EW-7206APg v4
bg (G54) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wireless LAN Access Point IEEE 802.11g/b Range Extender / Access Point | |||||||||||||
![]() | |||||||||||||
Homepage | |||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt | |||||||||||||
OpenWrt |
Incompatible | ||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Edimax EW-7206APg v4 | ||||||||||||
FCC ID | |||||||||||||
Type |
access point, repeater, bridge | ||||||||||||
CPU1 ![]() | |||||||||||||
CPU1 Type |
Lexra LX5280 | ||||||||||||
CPU1 Speed |
180 MHz | ||||||||||||
Flash1 Chip |
Macronix MX29LV160CBTC-70G | ||||||||||||
Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> | ||||||||||||
RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
RAM1 Chip |
Mira P2V64S40ETP-G6 | ||||||||||||
ETH chip1 | |||||||||||||
ETH chip2 |
Realtek RTL8201CP | ||||||||||||
Ethernet Port Count |
1-100MbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||
Stock bootloader |
rtkload v1.3c | ||||||||||||
Stock FW OS |
Linux | ||||||||||||
Expansion IF types |
none specified | ||||||||||||
Power |
12 VDC, 1 A | ||||||||||||
Connector type |
barrel | ||||||||||||
Additional chips | |||||||||||||
Other | |||||||||||||
Default SSID: default (101 addl. devices) | |||||||||||||
Manuf/OEM/ODM | |||||||||||||
Retail | |||||||||||||
Availability | End of Life | ||||||||||||
FCC approval date | 30 May 2007 | ||||||||||||
Radio 1 | |||||||||||||
Chip1 | |||||||||||||
Chip2 |
Realtek RTL8225 | ||||||||||||
Wireless interface OUI |
00:1F:1F | ||||||||||||
Antenna Connector Type |
RP-SMA | ||||||||||||
Wireless Standard |
IEEE 802.11b/g | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
|
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Edimax device with specifications, see Edimax.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
"1242-00000263-01Z" is silkscreened on the board.
The FCC test report lists the following as identical models..
- Edimax EW-7206APg / GAP-E06G
- LevelOne WAP-0006
- Longshine LCS-WA5-40
- Hawking HWREG1 / HWBA54G
- MINITAR MNWAPG
- TONZE AW-6200R
- PheeNet WAP-554G
- JAHT WP-4001BR
- Conceptronic C54APM
- Intellinet 501903
- Asbis CN-WFAP
- Sandberg 131-01
- 2 Direct WL0027
- Planet WAP-4033
- Micronet SP918GKV5
JTAG-Serial Info
Serial
Info derived from
These serial logs are from the Intellinet branded unit shown above.
boot log |
---|
UART1 output test ok Uart init mfid=000000c2 devid=00002249 Found 1 x 2M flash memory ---RealTek(RTL8186)at 2005.06.06-11:22+0800 version 1.3c [16bit](180MHz) Jump to image start=0x80300000... display on entering boot loader, turning on display decompressing kernel: Uncompressing Linux... done, booting the kernel. done decompressing kernel. early printk enabled Determined physical RAM map: memory: 00800000 @ 00000000 (usable) Initial ramdisk at: 0x80196000 (634880 bytes) On node 0 totalpages: 2048 zone(0): 2048 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/ram console=0 ramdisk_start=0 single Calibrating delay loop... 178.99 BogoMIPS Memory: 5660k/8192k available (1419k kernel code, 2532k reserved, 760k data, 48k init, 0k highmem) Dentry-cache hash table entries: 1024 (order: 1, 8192 bytes) Inode-cache hash table entries: 512 (order: 0, 4096 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 2048 (order: 1, 8192 bytes) check_wait... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd pty: 256 Unix98 ptys configured Serial driver version 6.02 (2003-03-12) with no serial options enabled ttyS00 at 0x00c3 (irq = 3) is a rtl_uart1 state->flags=00000000 HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. block: 64 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. HDLC support module revision 1.02 for Linux 2.4 RealTek E-Flash System Driver. (C) 2002 RealTek Corp. Found 1 x 2M Byte MXIC MX29LV160AB at 0xbe000000 RTL8185 driver version 1.11 (2006-08-01) 8186NIC Ethernet driver v0.0.2 (Jan 30, 2004) eth0: RTL8186-NIC at 0xbd200000, 00:01:02:03:04:05, IRQ 4 eth1: RTL8186-NIC at 0xbd300000, 04:05:06:07:08:09, IRQ 5 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 1024) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 RAMDISK: squashfs filesystem found at block 0 RAMDISK: Loading 618 blocks [1 disk] into ram disk... done. Freeing initrd memory: 620k freed VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 48k freed mount /proc file system ok! serial console detected. Disabling virtual terminals. BusyBox v1.00-pre8 (2005.11.23-10:23+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. Sat Jan 1 00:00:00 UTC 2000 create flash.inc Initialize WLAN interface Interface doesn't accept private ioctl... set_mib (89F1): Operation not permitted SIOCGIFFLAGS: No such device bridge br0 doesn't exist; can't delete it Setup bridge... device eth0 entered promiscuous mode eth0:phy is 8201 SIOCDELRT: No such process device wlan0 entered promiscuous mode SIOCDELRT: No such process br0: port 2(wlan0) entering listening state br0: port 1(eth0) entering listening state br0: port 2(wlan0) entering learning state br0: port 2(wlan0) entering forwarding state br0: topology change detected, propagating br0: port 1(eth0) entering learning state br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating SIOCDELRT: No such process SIOCDELRT: No such process ********** run Diagd ********** setting: port: 31727 running in daemon mode ********** run GaTest ********** IEEE 802.11f (IAPP) using interface br0 (v1.6) Please enter your Name and Password User Name : ------------------------------------------------------------------------------- <TAB> Select <ESC> Exit <Enter> Enter |
Pictures
- Edimax
- Embedded system/access point
- Embedded system/repeater
- Embedded system/bridge
- Embedded System Realtek
- Embedded System RTL8186
- Realtek
- Embedded System Lexra
- Embedded System LX5280
- Embedded System RTL8201CP
- Manuf Edimax
- Embedded System RTL8225
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation