Edimax iMax Pro CAX1800

From TechInfoDepot
(Redirected from Edimax EW-7479CAX)
Jump to navigationJump to search
abgn+ac+ax (AX1800)
AX1800 Dual-Band Ceiling-Mount PoE AP
Homepage Product page
WikiDevi.wi-cat.ru Edimax iMax Pro CAX1800
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Supported
Gargoyle Status Unknown
Platform
Brand • Model • Rev Edimax iMax Pro
Model Part Number CAX1800
FCC ID NDD9574791906
Type enterprise access point
CPU1 checkY Qualcomm IPQ8070A
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.4 GHz ( 4 cores )
Flash1 Chip Macronix MX30UF1G18AC-XKI-T
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
Flash2 Size 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (NOR)
RAM1 Size 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3)
RAM1 Chip Nanya NT5CC256M16ER-EK
ETH chip1 Qualcomm IPQ8070A
ETH chip2 Qualcomm Atheros QCA8072
Ethernet Port Count 1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Stock FW OS Linux
Expansion IF types none specified
PoE 802.3af, standard
Power 12 VDC, 1 A
Connector type barrel
Serial Port (UART) yes, 4-pin header, 3.3V TTL

Flags:
Wi-Fi 6, 1024QAM, VHT80, HEW80, MU-MIMO

Additional chips
2.4GHz Front End Module;Skyworks;SKY85334-11;;2;
5GHz WLAN Front-End Module;Skyworks;SKY85750-11;;2;
Power Management IC;Qualcomm;PMP8074;;1;

Other

Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 303 additional devices
of which 58 are Edimax devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 190 additional devices
of which 73 are Edimax devices

Manuf/OEM/ODM Edimax
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 11 December 2019
ASIN B0B9TTDVYQ
Country of manuf China
Radio 1
Chip1 Qualcomm QCN5024
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 574 Mbps
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm QCN5054
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac/ax
802.11ax up to 1201 Mbps
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Edimax devices with specifications, see Edimax.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 256-QAM),
• 1201 Mbps - 2SS 5GHz 802.11ax (80MHz chan., 1024-QAM) = AX1800 class

Overview

FCC ID: NDD9574791906 (2019-12-11), FCC ST (06/08/2020)
AX1800 (2T2R, VHT80, HEW80), 192.168.2.1, admin/1234, 12V/1A
See also: Edimax EW-7473CAX, Acelink and Edimax


This device was under short-term confidentiality, but that expired 06/08/2020 ⚠.

Flashing

Flashing OpenWrt

Target: qualcommax
Subtarget: ipq807x
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 24.10.5
LAN Comment: Atheros QCA8072 Phy, PoE
WLAN Hardware: Qualcomm QCN5024, Qualcomm QCN5054
WLAN Comment: 2x2:2 MIMO on both bands
Installation method(s):
U-Boot TFTP + serial recovery
Recovery method(s):
U-Boot TFTP + serial recovery
git • >> 
ipq807x: add Edimax CAX1800
Edimax CAX1800 is a 802.11 ax dual-band AP
with PoE. AP can be ceiling or wall mount.

Specifications:

    •     CPU: Qualcomm IPQ8070A Quad core Cortex-A53 1.4GHz
    •     RAM: 512MB of DDR3
    •     Storage: 128MB NAND (contains rootfs) / 8MB NOR (contains art and uboot-env)
    •     Ethernet: 1x 1G RJ45 port (QCA8072) PoE
    •     WLAN:
          2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate
          5GHz: Qualcomm QCN5054 2x2 802.11a/b/g/n/ac/ax 1201 PHY rate

    •     LEDs:
          3 x GPIO-controlled System-LEDs
          (form one virtual RGB System-LED)
            black_small_square  Buttons: 1x soft reset
            black_small_square  Power: 12V DC jack or PoE (802.3af )

        An unpopulated serial header is onboard.
        RX/TX is working, bootwait is active, secure boot is not enabled.

        SSH can be activated in the stock firmware, but it drops only
        to a limited shell .

        Installation Instructions:

            black_small_square obtain serial access
            black_small_square stop auto boot

            black_small_square tftpboot the initramfs image (serverip is set to 192.168.99.8 in uboot)
            black_small_square bootm

            black_small_square copy openwrt-ipq807x-generic-edimax_cax1800-squashfs-nand-factory.ubi
	      to the device
            black_small_square write the image to the NAND:
            black_small_square cat /proc/mtd and look for rootfs partition (should be mtd0)
            black_small_square ubiformat /dev/mtd0 -f -y  openwrt-ipq807x-generic-edimax_cax1800-squashfs-
              nand-factory.ubi
            black_small_square reboot

	Note: Device is not using dual partitioning (NAND contains other partitions
        with different manufacture data etc.)
	Draytek VigorAP 960C and Lancom LW-600 both look similar, but I haven't checked them.

See also

List of 802.11ax Hardware • Edimax Pro AP series
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=Edimax_iMax_Pro_CAX1800&oldid=516969"