Embest SBC-EC9100
SBC-EC9100 | |
Homepage | |
---|---|
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
Embest Technology SBC-EC9100 REV 02 |
Type |
single-board computer |
CPU1 |
Freescale (NXP) i.MX6ULL |
CPU1 Type |
ARM Cortex-A7 |
CPU1 Speed |
528 MHz |
Flash1 Chip |
Micron MTFC4GLDEA-0M WT |
Flash1 Size |
4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (eMMC) |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3L SDRAM) |
RAM1 Chip |
Micron MTFC4GLDEA-0M WT |
ETH chip1 |
Freescale (NXP) i.MX6ULL |
ETH chip2 |
Microchip KSZ8081 |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
| |
Stock bootloader |
U-Boot 2015.04 |
Stock FW OS |
Linux 3.14.52 Debian 8.4 |
Expansion IF types |
USB 2.0, USB 2.0 (OTG), MicroSD Card slot |
USB ports |
2 |
SD/MMC Slots |
1 |
USB Hub Compatible |
Untested |
Power |
5 VDC, 2 A |
Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
Serial Port (UART) |
yes, via GPIO header, (115200 8N1) |
Flags: MicroSD Card slot, MIPI CSI, CAN Bus, RS485, I2C, SPI, UART, GPIO | |
Additional chips | |
Other | |
Default IP address: acquired via DHCP | |
Retail | |
(Est.) release date | June 2016 |
(Est.) initial retail price (in USD): | $30 |
ASIN | B0BHQMZGS2 |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Microchip (SMSC) chipsets with specifications, see Microchip.
For a list of all currently documented Embest Technology device with specifications, see Embest Technology.
Overview
"SBC-EC9100 REV02" and "2016-6-2" is on top of board.
Hardware specification
- CPU: Freescale (NXP) i.MX6ULL @528MHz
- MCIMX6G3DVM05AA • ARM (Cortex-A7)
- Memory: 512MB (DDR3L) SDRAM
- Storage: 4GB eMMC Flash
- Network: 1x FE port
- USB: 1x USB 2.0, 1x USB (OTG) ports
- GPIO: 2x 40-pin headers
- Power Source: 5V/2A via barrel