Enable Networks CR3000

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
300N Wi-Fi Router
with Dragon88 Firmware and CloudCommand XP Service
WikiDevi.wi-cat.ru Enable Networks CR3000
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Enable Networks CR3000
FCC ID U2M-WBR2100AFN
IC ID 3616C-WBR2100AFN
Type wireless router
CPU1 checkY Atheros AR1321
CPU1 Type MIPS 74Kc
CPU1 Speed not specified
Flash1 Chip Eon Q32B-104HIP
Flash1 Size 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Atheros AR1321
Switch Atheros AR1321
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types none specified
Power 5 VDC, 1 A
Connector type barrel
Other

Default SSID: SETUP-XX
Default IP address: 192.168.99.1
the IP 192.168.99.1 is used by 2 additional devices
of which 0 are Enable Networks devices

Manuf/OEM/ODM Senao WBR2100AFN
Retail
FCC approval date 20 February 2013
Country of manuf Taiwan
Radio 1
Chip1 Atheros AR1321
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 FCC ID
PowerCloud Systems CR3000U2M-WBR2100AFN
Senao WBR2100AFNU2M-WBR2100AFN

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"7016A056000f" is silkscreened on the board in the FCC photos.

The device, per the FCC photos, seems to be using the following...

  • Atheros AR1321-AL1A WiSoC
  • Eon Q32B-104HIP (4MB Flash)

Per the FCC label and manual, the default (setup) SSID appears to be SETUP-XX (where XX is the last 2 digits of the UIC [Unit Identification Code]).

Likely 68:51:B7 (PowerCloud Systems) OUI (it's on the FCC label)