Enterasys WS-AP3705i

From TechInfoDepot
Jump to navigationJump to search
abgn (AN600)
600Mbps Dual-Radio Indoor Wireless Access Point
WikiDevi.wi-cat.ru Enterasys WS-AP3705i
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev Enterasys WS-AP3705i v1
FCC ID QXO-WSAP3705I
IC ID 4138A-WSAP3705
Board ID 8RNLAP01.2A1G
Type access point
CPU1 checkY Atheros AR9344
CPU1 Type MIPS 74Kc
CPU1 Speed 560 MHz 32-bit
Flash1 Chip Macronix MX25L12845EMI-10G x 2
Flash1 Size 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip ESMT M14D5121632A-2.5B x 2
ETH chip1 Atheros AR9344
Ethernet Port Count 1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: 20:B3:99
Ethernet OUI: 20:B3:99

Stock bootloader U-Boot
Expansion IF types none specified
PoE 802.3af, standard
Power 48 VDC, 0.4 A
Connector type Ethernet (PoE)
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)

Additional chips
2.4GHz Power Amplifier;Microsemi;LX5535;MSC5535;2;InGaP HBT, 2.4-2.5 GHz;
5GHz Power Amplifier;Microsemi;LX5530;MSC5530;2;InGaP HBT, 4.5-6.0 GHz;

Other
Manuf/OEM/ODM Alpha Networks RNL-AP01 .2A1G
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
End of Life date 2016
FCC approval date 05 July 2012
ASINs B00AT4AQD8
B00BRF01YC
Country of manuf China
Radio 1
Chip1 Atheros AR9344
Wireless interface OUI 20:B3:99
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Atheros AR9582
Wireless interface OUI 20:B3:99
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Enterasys devices with specifications, see Enterasys.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),
300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = AN600 class

Overview

"8RNLAP01..2A1G" appears to be silkscreened on the board in the FCC photos.

Probable 20:B3:99 OUI (it's on the FCC label)

This device uses an Atheros SoC (probably AR9344) and an Atheros chip for the 5GHz radio.

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.2
WLAN Hardware: Atheros AR9344, Atheros AR9580
WLAN Comment: MIMO 2x2:2 for each band
Installation method(s):
U-Boot TFTP recovery
Recovery method(s):
U-Boot TFTP recovery
git • >>
ath79: add support for Enterasys WS-AP3705i
Hardware
--------
SoC:    Atheros AR9344
RAM:    128M DDR2
FLASH:  2x Macronix MX25L12845EM
        2x 16MiB SPI-NOR
WLAN2:  Atheros AR9344 2x2 2T2R
WLAN5:  Atheros AR9580 2x2 2T2R
SERIAL: Cisco-RJ45 on the back (115200 8n1)

Installation
------------

The U-Boot CLI is password protected (using the same credentials as the
OS). Default is admin/new2day.

1. Download the OpenWrt initramfs-image. Place it into a TFTP server
   root directory and rename it to 1401A8C0.img. Configure the TFTP
   server to listen at 192.168.1.66/24.

2. Connect the TFTP server to the access point.

3. Connect to the serial console of the access point. Attach power and
   interrupt the boot procedure when prompted (bootdelay is 1 second).

4. Configure the U-Boot environment for booting OpenWrt from Ram and
   flash:

   $ setenv boot_openwrt 'setenv bootargs; bootm 0xbf230000'
   $ setenv ramboot_openwrt 'setenv serverip 192.168.1.66;
     tftpboot 0x85000000; bootm'
   $ setenv bootcmd 'run boot_openwrt'
   $ saveenv

5. Load OpenWrt into memory:

   $ run ramboot_openwrt

   Wait for the image to boot.

6. Transfer the OpenWrt sysupgrade image to the device. Write the image
   to flash using sysupgrade:

   $ sysupgrade -n /path/to/openwrt-sysuograde.bin

See also