Evaluation boards / unbranded boards Ralink V11ST-FE
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Incompatible |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Evaluation boards / unbranded boards Ralink V11ST-FE |
| Type | single-board computer |
CPU1  | Ralink RT2880F |
| CPU1 Type | MIPS 4KEc |
| CPU1 Speed | 266 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Ralink RT2880F |
| Switch | IC+ IP175C |
| Ethernet Port Count | 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | Mini PCI |
| Mini PCI slots | 1 |
| Serial Port (UART) | yes, (57600 8N1) |
| JTAG Port | yes |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt (Was) |
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
Target: ramips
Subtarget: rt288x
Package architecture: mips_4kec
Supported Since Commit
Support started version: 15.05
Current supported version: EOL
Last Supported Version: 19.07.10
Image too big: snapshot
Subtarget: rt288x
Package architecture: mips_4kec
Supported Since Commit
Support started version: 15.05
Current supported version: EOL
Last Supported Version: 19.07.10
Image too big: snapshot
WLAN Comment: WLAN dependent on mPCI installed
Comment:
Image build disabled in master with commit d7d46da938e3
Comment:
Image build disabled in master with commit d7d46da938e3
| git • >> |
|---|
add Ralink V11ST-FE board support This board is equipped with: - 4MB of NOR Flash - 32MB of SDRAM - IC+ IP175C switch - one Mini-PCI slot SVN-Revision: 30561 |
