
You do not need an accout to report a problem with the wiki.
-
Evoluzn FX-ID4
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1200) | |
---|---|
FX-ID4 Indoor CPE (Primary) | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Not Supported |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
Evoluzn FX-ID4 |
FCC ID |
none specified |
Type |
CPE |
CPU1 ![]() | |
CPU1 Speed |
880 MHz |
Flash1 Chip |
Winbond W25Q256FV |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Chip |
Brand? Model? |
nvram Size |
64K |
ETH chip1 |
Brand? Model? |
Ethernet Port Count |
4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot 1.1.3 |
Stock FW OS |
Linux 2.6.36+ |
Expansion IF types |
USB 3.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Connector type |
barrel |
Serial Port (UART) |
yes |
JTAG Port |
no |
Flags: LTE-A | |
| |
Radio 1 | |
Chip1 |
Brand? Model? |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Brand? Model? |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Overview
The Evoluzn FX-ID4 is a prepaid WiFi device from PLDT-SMART that uses LTE-Advanced technology. It has a built-in external antenna connector and an e-SIM, which means it can't use a removable SIM card.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Please insert instructions here