GL.iNet GL-AX1800 (Flint)
From TechInfoDepot
				
				
				Jump to navigationJump to search
				
				| abgn+ac+ax (AX1800) | |
|---|---|
| Secure & Powerful Wi-Fi 6 Router | |
|  | |
| Homepage | Product page | 
| WikiDevi.wi-cat.ru | GL.iNet GL-AX1800 (Flint) | 
| 3rd Party Firmware | |
| dd-wrt | Status Unknown | 
| OpenWrt | Supported | 
| Tomato any flavor | Incompatible | 
| Gargoyle | Status Unknown | 
| Platform | |
| Brand • Model • Rev | GL.iNet GL-AX1800 (Flint) | 
| FCC ID | 2AFIW-AX1800 | 
| Type | wireless router | 
| CPU1  | Qualcomm IPQ6018 | 
| CPU1 Type | ARM Cortex-A53 | 
| CPU1 Speed | 1.2 GHz ( 4 cores ) | 
| Flash1 Chip | ESMT Model? | 
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) | 
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> | 
| RAM1 Chip | ESMT Model? | 
| ETH chip1 | Qualcomm IPQ6018 | 
| Switch | Qualcomm Atheros QCA8075 | 
| Ethernet Port Count | 1-1GbE-WAN 4-1GbE-LAN | 
| Wired Standard | IEEE 802.3i/3u/3ab | 
| Stock bootloader | U-Boot | 
| Stock FW OS | Linux | 
| Expansion IF types | USB 3.0 | 
| USB ports | 1 | 
| USB Hub Compatible | Untested | 
| Power | 12 VDC, 1.5 A | 
| Connector type | barrel | 
| Flags: | |
|  | |
| Other | |
| Default IP address: 192.168.8.1 | |
| 3rd Party Firmware Support | OpenWrt • (List | Dev | DLs) | 
| Retail | |
| FCC approval date | 10 November 2021 | 
| (Est.) release date | September 2021 | 
| ASIN | B09HBW45ZJ  | 
| Country of manuf | China | 
| Physical | |
| Dimensions | 210 x 120 x 36.8 mm | 
| Radio 1 | |
| Chip1 | Qualcomm QCN5022 | 
| Wireless interface OUI | E4:95:6E | 
| Antenna Connector Type | none specified | 
| MIMO status | 2x2:2 | 
| Wireless Standard | IEEE 802.11b/g/n/ax | 
| 802.11ax | up to 574 Mbps | 
| 802.11n | up to 300 Mbps | 
| 802.11g | up to 54 Mbps | 
| 802.11b | up to 11 Mbps | 
| WiFi Operating Frequency | 2.4 GHz | 
| Radio 2 | |
| Chip1 | Qualcomm QCN5022 | 
| Wireless interface OUI | E4:95:6E | 
| Antenna Connector Type | none specified | 
| MIMO status | 2x2:2 | 
| Wireless Standard | IEEE 802.11a/n/ac/ax | 
| 802.11ax | up to 1201 Mbps | 
| 802.11ac | up to 867 Mbps | 
| 802.11n | up to 300 Mbps | 
| 802.11a | up to 54 Mbps | 
| WiFi Operating Frequency | 5 GHz | 
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented GL.iNet devices with specifications, see GL.iNet.
Overview
See also: GL.iNet
Specification
- CPU: IPQ6000 @1.2GHz (Quad-core ARM)
- NPU (Networking Processing Unit): @1.5GHz
- Memory/Storage: 512MB (DDR3L)/128MB (NAND)
- Wi-Fi protocol: 802.11abgn/ac/ax (2T2R) AX1800
- Speed: 600Mbps (2.4GHz), 1200Mbps (5GHz)
- Antennas: 4x external antennas
- Ethernet Ports: 5x 10/100/1000Mbps
- Dimension: 210 x 120 x 36.8 mm
Flashing
|  | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. | 
Flashing OpenWrt
|  | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. | 
|  | Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI | 
OpenWrt Target: qualcommax
OpenWrt Subtarget: ipq60xx
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: unknown
Current supported version: snapshot
OpenWrt Subtarget: ipq60xx
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: unknown
Current supported version: snapshot
Install Comment:
GL.Inet installation
Comment:
Recovery method(s):U-Boot web recovery
GL.Inet installation
Comment:
Recovery method(s):U-Boot web recovery
Please insert instructions here
See also
- GL.iNet GL-AX1800 (Flint) • OpenWrt
- FCC ID: 2AFIW-AX1800 (2021-11-10)
- GL.iNet GL-B2200 (Velica)
- Tri-band Wireless Gigabit Router
- FCC ID: 2AFIW-B2200 (2020-10-21)
- GL.iNet GL-B1300 (Convexa-B)
- FCC ID: 2AFIW-GLB1300 (01/19/18)
- GL.iNet GL-S1300 (Convexa-S)
- FCC ID: 2AFIW-S1300 (04/30/2019)
- FCC ID: 2AFIW-MV1000W (2019-12-10)
- GL.iNet GL-MT1300 (AC1300)
- FCC ID: 2AFIW-MT1300 (2020-10-21)
- GL.iNet GL-SF1200 (Meet) • OpenWrt
- CPU: SiFlower SF19A2890 @800MHz
- Dual-core MIPS (2C4T) WiSoC (2T2R)
- FCC ID: 2AFIW-SF1200 (2021-12-02)
- GL.iNet GL-SFT1200 - Travel Router
- FCC ID: 2AFIW-SFT1200 (2021-12-07)
Categories: 
- GL.iNet
- Embedded system/wireless router
- Embedded System Qualcomm
- Embedded System IPQ6018
- Qualcomm
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System Qualcomm Atheros
- Embedded System QCA8075
- Qualcomm Atheros
- OpenWrt Supported
- Embedded System QCN5022
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation



