GL.iNet GL-BE10000

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax+be (BE11000)
Tri-band Wi-Fi 7 Travel Router
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev GL.iNet GL-BE10000 Slate 7 Pro
FCC ID none specified
Type travel router
CPU1 checkY MediaTek MT7995AV
CPU1 Type ARM Cortex-A53
CPU1 Speed 2.0 GHz ( 4 cores ) 64-bit
Flash1 Chip Brand? Model?
Flash1 Size 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (SPI NAND)
RAM1 Size 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR4)
RAM1 Chip Brand? Model?
ETH chip1 MediaTek MT7995AV
Switch Realtek RTL8221
Ethernet Port Count 1-2.5GbE-WAN
1-2.5GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types USB 3.0 (Type-C)
USB ports 1
USB Hub Compatible Untested
Power 12 VDC, 2.5 A
Serial Port (UART) yes, (115200 8N1)
JTAG Port yes
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 MediaTek MT7995AV
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax/be
802.11be up to 688 Mbps
802.11ax up to 574 Mbps
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7995AV
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 3x3:2
Wireless Standard IEEE 802.11a/n/ac/ax/be
802.11be up to 2882 Mbps
802.11ax up to 1201 Mbps
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
Radio 3
Chip1 MediaTek MT7995AV
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 3x3:3
Wireless Standard IEEE 802.11ax/be
BE-QAM up to 5764 Mbps
WiFi Operating Frequency 6 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented GL.iNet devices with specifications, see GL.iNet.

• 688 Mbps - 2SS 2.4GHz 802.11be (40MHz chan.),
• 4323 Mbps - 3SS 5.2GHz 802.11be (160Hz chan.),
• 5764 Mbps - 4SS 5.8GHz 802.11be (160MHz chan.) = BE11000 class

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
LAN Hardware: internal PHY, RTL8221
WLAN Hardware: MT7995AV
WLAN Comment: 2.4GHz: 2x2 MIMO, 5GHz: 3x3 MIMO, 6GHz: 3x3 MIMO
USB SATA Comment: USB-C 3.0 data, USB-C power
Installation method(s):
U-Boot web recovery
Install Comment:
Flash sysupgrade over OEM firmware and do not keep settings
Recovery method(s):
U-Boot web recovery
Recovery Comment:
Gl-inet U-boot recovery
Comment:
Slate 7 Pro includes a 2.8" touchscreen. Supports DSA, HFO, and WED. N/A in US yet due to new FCC laws
git • >>
mediatek: filogic: add support for GL.iNet BE10000
This patch adds support for GL.iNet BE10000(Slate 7 Pro)
The GL.iNet BE10000 is a portable device with Wi-Fi 7, featuring two
2.5G Ethernet ports, one of which is a LAN port
and the other a WAN port.

Hardware Specification:
 - SoC: MediaTek MT7987A (Quad-core ARM Cortex-A53 2.0 GHz)
 - RAM: 1024 MiB DDR4
 - Flash: 512 MiB SPI-NAND
 - WiFi: MediaTek MT7995AV (WiFi 7)
   - 2.4GHz: b/g/n/ax/be (2x2 MIMO)
   - 5GHz: a/n/ac/ax/be (3x3 MIMO)
   - 6GHz: ax/be (3x3 MIMO)
 - Ethernet:
   - 1x 10/100/1000/2500 Mbps WAN (Realtek RTL8221 PHY)
   - 1x 10/100/1000/2500 Mbps LAN (SoC internal PHY)
 - Buttons: Reset,Switch
 - UART: 115200 8n1 (VCC, RX, TX, GND)

Flash Layout:
 - 0x0~0x100000 : bl2
 - 0x100000~0x180000 : u-boot-env
 - 0x180000~0x580000 : Factory
 - 0x580000~0x880000 : fip
 - 0x880000~0x8c0000 : log
 - 0x8c0000~0x900000 : CFG
 - 0x900000~0x1e000000 : ubi

MAC Addresses:
 - Base MAC located at Factory partition offset 0x4000
 - gmac0 (WAN) : Base - 0 (Label MAC)
 - gmac1 (LAN) : Base - 1

Installation:
 1. You can directly upgrade using the
    openwrt-mediatek-filogic-glinet_gl-be10000-squashfs-sysupgrade.bin
    image on the official GL firmware upgrade page.
 2. Access the device and use the sysupgrade command to upgrade.
    Note: When upgrading from official firmware, use the -n parameter
    to preserve no configuration.

Signed-off-by: GLiNet Tech
Link: https://github.com/openwrt/openwrt/pull/22485
Signed-off-by: Hauke Mehrtens