GL.iNet GL-XE300
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
---|---|
travel router | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
GL.iNet GL-XE300 |
FCC ID |
none specified |
Type |
travel router |
CPU1 |
Qualcomm Atheros QCA9531 |
CPU1 Type |
MIPS 24Kc |
CPU1 Speed |
650 MHz |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
Flash2 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR) |
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR2) |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Qualcomm Atheros QCA9531 |
Switch |
Qualcomm Atheros QCA9531 |
Ethernet Port Count |
2-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
microSDXC, Mini PCI, Nano SIM Card, USB 2.0 |
SIM Card slot |
1 |
Mini PCIe slots |
1 |
USB ports |
1 |
SD/MMC Slots |
1 |
USB Hub Compatible |
Untested |
Power |
? VDC, ? A ?v BAT , 5000 mAh, ? cells |
Serial Port (UART) |
yes, (115200 8N1) |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Radio1 module |
unknown |
Radio1 module IF |
Mini PCI |
Chip1 |
Qualcomm Atheros QCA9531 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented GL.iNet device with specifications, see GL.iNet.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ath79
OpenWrt Subtarget: nand
OpenWrt Package architecture: mips_24kc
Support started version: 22.03.0
Current supported version: 23.05.5
On the OpenWrt Wiki
OpenWrt Target: ath79
OpenWrt Subtarget: nand
OpenWrt Package architecture: mips_24kc
Support started version: 22.03.0
Current supported version: 23.05.5
Please insert instructions here