H3C Magic NX30 Pro

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac+ax (AX3000)
AX3000 Dual-Band Gigabit Wi-Fi 6 Router
WikiDevi.wi-cat.ru H3C Magic NX30 Pro
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev H3C Magic NX30 Pro
FCC ID none specified
Type wireless router
CPU1 checkY MediaTek MT7981BA
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip Winbond W25N01GVZEIG
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip Nanya NT5CB128M16JR-FL
ETH chip1 MediaTek MT7981BA
Switch MediaTek MT7531AE
Ethernet Port Count 1-1GbE-WAN
3-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Stock FW OS Linux
Expansion IF types none specified
Power 12 VDC, 1 A
Connector type barrel
Serial Port (UART) yes, 4-pin header

Flags:
Wi-Fi 6, WPA3, MU-MIMO, 1024QAM, HE160, heatsink

Other

Default IP address: 192.168.124.1
the IP 192.168.124.1 is used by 2 additional devices
of which 2 are H3C devices

3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
(Est.) release date June 2023
Country of manuf China
Radio 1
Chip1 MediaTek MT7981BA
Chip2 MediaTek MT7976CN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 574 Mbps
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7981BA
Chip2 MediaTek MT7976CN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x3:2
Wireless Standard IEEE 802.11a/n/ac/ax
AX-QAM up to 2402 Mbps
802.11ax up to 1201 Mbps
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
H3C Magic NX30QualcommQualcommQualcomm
H3C Magic NX30 ProMediaTekMediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented H3C devices with specifications, see H3C.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),
• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Overview

See also: H3C and List of 802.11ax Hardware

Links of Interest

H3C Magic NX30 Pro • AX3000 • MediaTek

News

Qualcomm Networking Pro 1220 Platform (2.4/5/6GHz, EHT320)

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.1
LAN Hardware: MediaTek MT7531AE
WLAN Hardware: MediaTek MT7976C
Installation method(s):
U-Boot TFTP recovery
Recovery method(s):
U-Boot TFTP recovery
git • >> 
mediatek: filogic: add H3C Magic NX30 Pro support
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: W25N01GVZEIG 128MB
  RAM: NT5CB128M16JR-FL 256MB
  Ethernet: 4x 10/100/1000 Mbps
  Switch: MediaTek MT7531AE
  WiFi: MediaTek MT7976C
  Button: Reset, WPS
  Power: DC 12V 1A

Flash instructions:
  1. PC run command: "telnet 192.168.124.1 99"
     Username: H3C, password is the web login
     password of the router.
  2. Download preloader.bin and bl31-uboot.fip
  3. PC run command: "python3 -m http.server 80"
  4. Download files in the telnet window:
     "wget http://192.168.124.xx/xxx.bin"
     Replace xx with your PC's IP and
     the preloader.bin and bl31-uboot.fip.
  5. Flushing openwrt's uboot:
     "mtd write xxx-preloader.bin BL2"
     "mtd write xxx-bl31-uboot.fip FIP"
  6. Connect to the router via the Lan port,
     set a static ip of your PC.
     (ip 192.168.1.254, gateway 192.168.1.1)
  7. Download initramfs image, reboot router,
     waiting for tftp recovery to complete.
  8. After openwrt boots up, perform sysupgrade.

Note:
  1. The u-boot-env partition on mtd is empty,
     OEM stores their env on ubi:u-boot-env.
  2. Back up all mtd partitions before flashing.

See also

Models

H3C Products • H3C • List of 802.11be Hardware
Models
Qualcomm IPQ5018 2x 1.0GHz (Immersive Home 216)
Wi-Fi 6 AP
H3C Magic BR1008L-HP • PoE Indoor AP (54V/1.17A)
H3C Magic BA3000L (x4) • 802.11ax Indoor AP
Wi-Fi 5 AP

Specifications

* Model 	 || CPU (SoC) || Core/Freq ||   RAM/Flash  ||   RF 2.4GHz/FEM    ||   RF1 5GHz/FEM     ||  RF2 6GHz/FEM 

* H3C BE18000    || IPQ9574   || 4x 2.2GHz || 1024MB/256MB || IPQ9574/QCN9224    || IPQ9574/QCN9274    || IPQ9574/QCN9274
* H3C NX15000    || IPQ5018   || 2x 1.0GHz || 512MB/128MB  || IPQ5018/KCT8239S   || QCN9074/KCT8539S   || QCN9074/KCT8539S
* H3C AX71       || IPQ5018   || 2x 1.0GHz || 512MB/32MB   || IPQ5018/SKY85337   || QCN9074/SKY85755   || 
* H3C BX54       || IPQ5018   || 2x 1.0GHz || 512MB/8192MB || IPQ5018/SKY85333   || QCN9074/SKY85747   || 
* H3C NX54       || IPQ5018   || 2x 1.0GHz || 512MB/128MB  || IPQ5018/KCT8239S   || QCN9074/KCT8539S   || 
* H3C NX30       || IPQ5000   || 2x 1.0GHz || 256MB/128MB  || IPQ5000 (WiSoC)    || QCN6102/KCT8539S   || 
* H3C NX30 Pro   || MT7981BA  || 2x 1.3GHz || 256MB/128MB  || MT7981BA/MT7976CN  || MT7981BA/MT7976CN  || 
* H3C NX18       || MT7621A   || 2x 880MHz || 256MB/16MB   || MT7905DAN/MT7975DN || MT7905DAN/MT7975DN || 
* H3C NX15       || RTL8197H  || 1x 1.0GHz || 128MB/16MB   || RTL8197H (WiSoC)   || RTL8832BR          || 
* H3C R300       || RTL8197FH || 1x 1.0GHz ||  64MB/8MB    || RTL8197FH (WiSoC)  || RTL8814BR          || 
* H3C N12        || RTL8197FH || 1x 1.0GHz ||  64MB/8MB    || RTL8197FH (WiSoC)  || RTL8812FR          || 
* H3C B5 Mini    || RTL8197FH || 1x 1.0GHz ||  64MB/8MB    || RTL8197FH (WiSoC)  || RTL8812FR          || 
* H3C B5         || RTL8197FS || 1x 1.0GHz || 128MB/16MB   || RTL8197FS/RTC6691  || RTL8812BRH/RWL5305 ||
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=H3C_Magic_NX30_Pro&oldid=517220"