Handlink WAP-001 rev. 1

multiple revisions of this device, use caution

bgn (N300)
In Wall Box Access Point
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Handlink WAP-001 1
FCC ID	TWS-WAP-001
Type	access point, in-wall access point
CPU1	Ralink RT3052
CPU1 Type	MIPS 24KEc
CPU1 Speed	384 MHz
Flash1 Chip	Macronix MX29LV640EBTI-70G
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	Mira P3V56S40ETP-G6
ETH chip1	Ralink RT3052
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
PoE	802.3af, standard
Power	? VDC, ? A
Connector type	Ethernet (PoE)
Serial Port (UART)	yes, internal, 4-pin header, 3.3V TTL
Additional chips 2.4GHz Power Amplifier IC;Skyworks;SE2597L;;2;
Other
Default SSID: Wireless (24 addl. devices) Default IP address: 10.59.1.254 the IP 10.59.1.254 is used by 1 additional devices of which 1 are Handlink devices Default login user: admin Default login password: admin admin:admin credentials used by 1342 additional devices of which 2 are Handlink devices
Retail
FCC approval date	05 May 2010
Country of manuf	Taiwan
Radio 1
Chip1	Ralink RT3052
Wireless interface OUI	none specified
Antenna Connector Type	none
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Handlink WAP-001 rev. 1 Ralink Ralink Handlink WAP-001 rev. 2 MediaTek MediaTek

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

Default settings (including the SSID) are per the FCC manual. They may be inaccurate.