Hasivo S1300WP-8XGT-4S-plus 1.02
From TechInfoDepot
Jump to navigationJump to search
| PoE switch | |
|
| |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Not Supported |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | Hasivo S1300WP-8XGT-4S-plus 1.02 |
| CPU1 | Realtek RTL9313 |
| Flash1 Size | 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size | 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| ETH chip1 | Brand? Model? |
| Switch | Realtek RTL9310 |
| Ethernet Port Count | 24-1GbE |
| Ethernet connector | 9P9C |
| Wired Standard | IEEE 802.3i/3u/3ab |
| Auto-MDIX | unspecified |
| Switch Class | managed |
|
Ethernet OUI: none specified | |
| Expansion IF types | 10GSFP |
| SFP ports | 4 |
| Stock bootloader | U-Boot |
| Power | ? VDC, ? A |
| Serial Port (UART) | yes, (38400 8N1) |
|
| |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Hasivo devices with specifications, see Hasivo.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: realtek
OpenWrt Subtarget: 931x
Support started version: unknown
Current supported version: snapshot
OpenWrt Subtarget: 931x
Support started version: unknown
Current supported version: snapshot
Unsupported Functions:
Link, Watchdog, LEDs
Install Comment:
no proper method yet
Recovery Comment:
hardware flash (SOP8)
Link, Watchdog, LEDs
Install Comment:
no proper method yet
Recovery Comment:
hardware flash (SOP8)
Please insert instructions here