Hongdian H8850 v20
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |
|---|---|
| Enhanced WiFi Router | |
 | |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Hongdian H8850 v20 v20 |
| FCC ID | none specified |
| Type | wireless router |
CPU1  | MediaTek MT7628DAN |
| CPU1 Type | MIPS 24KEc |
| CPU1 Speed | 580 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | MediaTek MT7628DAN |
| Switch | MediaTek MT7628DAN |
| Ethernet Port Count | 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | none specified |
| Power | 5-36 VDC, 1.5 A |
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Chip1 | MediaTek MT7628DAN |
| Chip2 | MediaTek MT7628NN |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
Target: ramips
Subtarget: mt76x8
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 24.10.5
Current supported version: 25.12.2
Subtarget: mt76x8
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 24.10.5
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7628DAN
WLAN Hardware: MediaTek MT7628NN
Installation method(s):
see git-commit
Install Comment:
Original Firmware Dump / More details: https://blog.gov.cooking/archives/research-hongdian-h8850-v20-and-flash.html
WLAN Hardware: MediaTek MT7628NN
Installation method(s):
see git-commit
Install Comment:
Original Firmware Dump / More details: https://blog.gov.cooking/archives/research-hongdian-h8850-v20-and-flash.html
| git • >> |
|---|
ramips: add support for Hongdian H8850 v20 This is an industrial 4G router equipped with OpenWrt SNAPSHOT OEM customized version WARNING: The original firmware device tree is modified from evb boards, and the device tree name is evb board. This submitted device tree is a modified version, which deletes the non-this-device parts and adds GPIO watchdog. Specification: - SoC: MediaTek MT7628DAN - Flash: 16 MB - RAM: 64 MB - Power: DC 5V-36V 1.5A - Ethernet: 1x WAN/LAN, 3x LAN (10/100 Mbps) - Wireless radio: 802.11n 2.4g-only - LED: System/Power (PWR): Always Off Modem (NET): GPIO/3 active-low LAN: Always On RF (Modem Signal): GPIO/2 active-low WIFI: GPIO/44 active-low - Button: WPS / RESET: GPIO/11 active-low - UART: 1x UART on PCB - 115200 8N1 - GPIO Watchdog: GPIO/0 mode=toggle timeout=1s - Modem: 1x Built-in modem on board (Power: GPIO/4 active-high) - SIM Slots: 1x SIM Slots Issue: - Factory partition not store mac address on original firmware Flash instruction: Using TTL: 1. Connect the board to the computer via TTL. 2. Enter original firmware failsafe mode. 3. Use wget download firmware to board /tmp 4. Use command "mtd -r write openwrt-ramips-mt76x8-hongdian_h8850-v20-squashfs-sysupgrade.bin firmware" to flash Original Firmware Dump / More details: https://blog.gov.cooking/archives/research-hongdian-h8850-v20-and-flash.html |
Categories:
- Hongdian
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7628DAN
- MediaTek
- Embedded System MIPS 24KEc
- Embedded System
- OpenWrt Supported
- Embedded System MT7628NN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation
