Huawei EchoLife HG655d
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4G Router | |||||||||||||
|
| |||||||||||||
| 3rd Party Firmware | |||||||||||||
| dd-wrt | Status Unknown | ||||||||||||
| OpenWrt | Partial Support | ||||||||||||
| Tomato any flavor | Status Unknown | ||||||||||||
| Gargoyle | Status Unknown | ||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev | Huawei EchoLife HG655d | ||||||||||||
| FCC ID | none specified | ||||||||||||
| Type | wireless router, dsl modem | ||||||||||||
| CPU1 | Broadcom BCM6368 | ||||||||||||
| CPU1 Type | MIPS BMIPS4350 | ||||||||||||
| CPU1 Speed | 400 MHz ( 2 cores ) 32-bit | ||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||
| ETH chip1 | Broadcom BCM6368 | ||||||||||||
| Switch | Broadcom BCM6368 | ||||||||||||
| Ethernet Port Count | 4-100MbE-LAN | ||||||||||||
| Wired Standard | IEEE 802.3i/3u | ||||||||||||
|
802dot11 OUI: none specified | |||||||||||||
| Stock bootloader | CFE | ||||||||||||
| Expansion IF types | USB 2.0 | ||||||||||||
| USB ports | 1 | ||||||||||||
| USB Hub Compatible | Untested | ||||||||||||
| Power | 12 VDC, 1.5 A | ||||||||||||
| Connector type | barrel | ||||||||||||
| Serial Port (UART) | yes, (115200 8N1) | ||||||||||||
| JTAG Port | yes | ||||||||||||
|
Flags: | |||||||||||||
|
| |||||||||||||
| Other | |||||||||||||
|
| |||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||
| Retail | |||||||||||||
| Availability | End of Life | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 | Ralink RT3062F | ||||||||||||
| Wireless interface OUI | none specified | ||||||||||||
| Antenna Connector Type | none specified | ||||||||||||
| MIMO status | 2x2:2 | ||||||||||||
| Wireless Standard | IEEE 802.11b/g/n | ||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Huawei devices with specifications, see Huawei.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
| DSL will not work at all on devices with BCM63xx DSL chipset (due to unavailability of FLOSS driver for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom DSL, Unsupported: DSL modem and Broadcom BCM63xx for details. |
Target: bcm63xx
Subtarget: smp
Package architecture: mips_mips32
Supported Since Commit
Support started version: 15.05
Current supported version: 23.05.6
Subtarget: smp
Package architecture: mips_mips32
Supported Since Commit
Support started version: 15.05
Current supported version: 23.05.6
Unsupported Functions:
DSL modem
LAN Hardware: Broadcom BCM6368
WLAN Hardware: Ralink RT3062F
Installation method(s):
see devicepage
Install Comment:
bootloader needs replacing; HG655b image is also valid for HG655d, but the HG655d rejects to flash it -> JTAG cable is required to replace the CFE bootloader.
DSL modem
LAN Hardware: Broadcom BCM6368
WLAN Hardware: Ralink RT3062F
Installation method(s):
see devicepage
Install Comment:
bootloader needs replacing; HG655b image is also valid for HG655d, but the HG655d rejects to flash it -> JTAG cable is required to replace the CFE bootloader.
| git • >> |
|---|
brcm63xx: Add Huawei HG655b support This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. |
Categories:
- Huawei
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Broadcom
- Embedded System BCM6368
- Broadcom
- Embedded System MIPS
- Embedded System BMIPS4350
- OpenWrt Supported
- Embedded System Ralink
- Embedded System RT3062F
- Ralink
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- Embedded System
- English Documentation