IP-COM EP9
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC1200) | |
|---|---|
| AC1200 Enterprise Mesh WiFi System | |
|
| |
| Homepage | Product page |
| WikiDevi.wi-cat.ru | IP-COM EP9 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | IP-COM EP9 (Mesh) |
| FCC ID fcc.io | 2ABZMEP9 |
| FCC ID fcc.report | 2ABZMEP9 |
| Board ID | 10036723 |
| Type | wireless system, mesh node |
| CPU1 | Realtek RTL8197FNT |
| CPU1 Type | MIPS 24Kc |
| CPU1 Speed | 600 MHz |
| Flash1 Chip | Winbond Model? |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | Realtek RTL8197FNT |
|
802dot11 OUI: none specified | |
| Expansion IF types | none specified |
| Power | 12 VDC, 1 A |
| Connector type | barrel |
|
Flags: | |
|
| |
| Other | |
|
Default SSID: IP-COM_XXXXXX (1 addl. devices) | |
| Manuf/OEM/ODM | Tenda |
| Retail | |
| FCC approval date | 03 August 2018 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | Realtek RTL8197FNT |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Realtek RTL8812BR |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11a/n/ac |
| 802.11ac | up to 867 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented IP-COM devices with specifications, see IP-COM.
Overview
"10036723" and "V1.2" is silkscreened on the antenna board.
The FCC entry for the IP-COM EW9 also covered a version of this device which was identical except that it was missing the switch circuitry. IP-COM appears to have re-designed the device to completely remove the switch circuitry and has had it re-certified under its own FCC ID.
See also
Categories:
- IP-COM
- Embedded system/wireless system
- Embedded system/mesh node
- Embedded System Realtek
- Embedded System RTL8197FNT
- Realtek
- Embedded System MIPS 24Kc
- Embedded System
- Manuf Tenda
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System RTL8812BR
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation