ISONWIFI ISonlink E05S

bgn (N300)
Smart-Home Wi-Fi System
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	ISONWIFI E05S
FCC ID	2ANDK-E05S
Type	wireless router
CPU1	MediaTek MT7620A
CPU1 Type	MIPS 24KEc
CPU1 Speed	580 MHz 32-bit
Flash1 Chip	Winbond Model?
Flash1 Size	? MiB
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	Winbond W9751G6KB-25
ETH chip1	MediaTek MT7620A
Ethernet Port Count	1-100MbE-WAN 1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	12 VDC, 1.5 A
Connector type	barrel
Additional chips 2.4GHz WLAN/Bluetooth FEM;Skyworks;SKY85303-11;SKY11, 85303, 709NW;1; 2.4GHz Power Amplifier IC;Skyworks;SE2576L;SiGe, 2576L, ;1;
Other
Default SSID: ISONWIFI Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1324 additional devices of which 1 are ISONWIFI devices Default login user: admin Default login password: admin admin:admin credentials used by 1342 additional devices of which 1 are ISONWIFI devices
Retail
FCC approval date	24 September 2017
Country of manuf	China
Radio 1
Chip1	MediaTek MT7620A
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Ralink RT3070
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"TKW08A V1.2" is silkscreened on the CPU board in the FCC photos.

"TKW08B V1.1" is silkscreened on the Wi-Fi board in the FCC photos.

There only appears to be one antenna for each of the two wireless modules. It also looks like one module transmits while the other receives.