Iomega StorCenter ix2-200

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
Iomega StorCenter ix2-200, Cloud Edition Network Storage
Homepage Product page
Support Support page
WikiDevi.wi-cat.ru Iomega StorCenter ix2-200
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Iomega StorCenter ix2-200
Type NAS
CPU1 checkY Marvell 88F6281
CPU1 Type ARMv5
CPU1 Speed 1.0 GHz
Flash1 Chip SK hynix H27UF081G2A-TPCB
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip Zentel A3R1GE3CFF-G8E
ETH chip1 Marvell 88F6281
ETH chip2 Marvell 88E1116R
Ethernet Port Count 1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

Ethernet OUI: 00:D0:B8 (10 E, -)

Stock bootloader U-Boot 1.1.4 Marvell 3.4.14
Stock FW OS Linux 2.6.22.18 LSP Version KW LSP 4.2.7 patch21
Expansion IF types USB 2.0, SATA 2
USB ports 3
SATA Ports 2
USB Hub Compatible Untested
Power 12 VDC, 4 A
Connector type barrel
Serial Port (UART) yes, 4-pin header, populated, JP1, 3.3V TTL, (115200 8N1)
JTAG Port yes, 20-pin header, unpopulated, J8

Flags:
RTC w/ battery backup

Additional chips
USB 2.0 Hub Controller;Alcor Micro;AU6256;;1;
1.5/2A, 1MHz Dual Step-down Regulator;Marvell;88PG8227;;2;
Synchronous Switching Regulator Controller;Marvell;88PH8101;;1;
30V Dual N-Channel MOSFET;Fairchild Semiconductor;FDS6986AS;;1;
Digital Temperature Sensor w/ Fan Control;National Semiconductor;LM63;;1;

Other

Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 255 additional devices
of which 8 are Iomega devices
Default login user: root
Default login password: soho
root:soho credentials used by 1 additional devices
of which 1 are Iomega devices

3rd Party Firmware Support Debian
Retail
Availability End of Life
Country of manuf Thailand
 CPU1 brandFLA1RAM1
Iomega StorCenter Pro ix4-300dIntel Atom1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br />4,096 MiB4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br />4 GiB <br />
Iomega StorCenter ix2 (NHDD2M)Marvell4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
Iomega StorCenter ix2-200Marvell128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
Iomega StorCenter ix2-dlMarvell1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br />256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
Iomega StorCenter ix4-200dMarvell32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
Iomega StorCenter ix4-300dMarvell512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
Iomega StorCenter px4-300dIntel Atom1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br />2,048 MiB2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />2 GiB <br />
Iomega StorCenter px6-300dIntel Atom1,024 MiB1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />1 GiB <br />2,048 MiB2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />2 GiB <br />

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented Iomega devices with specifications, see Iomega.

Links of Interest

Reviews

Flashing

Flashing OpenWrt

Target: kirkwood
Subtarget: generic
Package architecture: arm_xscale
Supported Since Commit
Support started version: 19.07.0
Current supported version: 25.12.5
LAN Comment: Marvell 88E1116R Phy
WLAN Comment: none
Installation method(s):
U-Boot TFTP + serial recovery, see git-commit
git • >> 
kirkwood: add support for Iomega Storcenter ix2-200
Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell
 Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of
 flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC

Specification:
- SoC: Marvell Kirkwood 88F6281
- CPU/Speed: 1000Mhz
- Flash-Chip: SK hynix NAND
- Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16
- RAM: 256MB
- LAN: 1x 1000 Mbps Ethernet
- WiFi: none
- 3x USB 2.0
- UART: for serial console

Installation instructions - easy steps:
1. download factory.bin and copy into tftp server
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    setenv serverip 192.168.1.1
    setenv ipaddr 192.168.1.13
    tftpboot 0x00800000 factory.bin
    nand erase 0x100000 $(filesize)
    nand write 0x00800000 0x100000 $(filesize)
    run bootcmd
    ```
3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)

Installation steps nand bad blocks proof:
1. download initramfs-uImage and copy into usb ext2 partition
    ```
    mkfs.ext2 -L ext2 /dev/sdh1
    mount -t ext2 /dev/sdh1 /mnt
    cp initramfs-uImage /mnt/initramfs.bin
    umount /mnt
    ```
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000
    ```
3. log into openwrt and sysupgrade to install into flash
    ```
    sysupgrade -n /tmp/sysupgrade.bin
    ```
4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=Iomega_StorCenter_ix2-200&oldid=537534"