Keenetic 4G (KN-1210)

multiple revisions of this device, use caution

bgn (N300)
N300 Whole Home Wi-Fi 3G/4G Router
Homepage	Product page (EN) Product page
Wikipedia	ZyXEL
WikiDevi.wi-cat.ru	Keenetic 4G (KN-1210)
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported (Unofficially)
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	ZyXEL Keenetic 4G
Model Part Number	KN-1210
FCC ID	none specified
Board ID	2050500988
Type	wireless router
CPU1	MediaTek MT7628N
CPU1 Type	MIPS 24KEc
CPU1 Speed	575 MHz 32-bit
Flash1 Chip	GigaDevice GD25Q128CSIG
Flash1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	ESMT M14D5121632A
ETH chip1	MediaTek MT7628N
Switch	MediaTek MT7628N
Ethernet Port Count	1-100MbE-WAN 3-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 50:FF:20 (5 E, 5 W) Ethernet OUI: 50:FF:20 (5 E, 5 W)
Stock bootloader	U-Boot 1.1.3 4.0.0.4_NDMS
Stock FW OS	Linux 4.9
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1 A
Connector type	barrel
Serial Port (UART)	yes, 4-pin header, (57600 8N1), J13
Other
Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1326 additional devices of which 97 are ZyXEL devices Default login user: admin Default login password: 1234 admin:1234 credentials used by 185 additional devices of which 66 are ZyXEL devices
Manuf/OEM/ODM	TP-LINK
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
Availability	Keenetic Launcher
(Est.) release date	September 2017
Country of manuf	China
Radio 1
Chip1	MediaTek MT7628N
Wireless interface OUI	50:FF:20
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Keenetic 4G (KN-1210) MediaTek MediaTek ZyXEL Keenetic 4G II Ralink Ralink ZyXEL Keenetic 4G III rev B MediaTek MediaTek ZyXEL Keenetic 4G rev B Ralink Ralink

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented ZyXEL device with specifications, see ZyXEL.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

• Keenetic 4G (KN-1210)
• Keenetic Launcher (KN-1211)

See also: ZyXEL/Keenetic series

Links of Interest

• OpenWrt for Keenetic 4G (KN-1210) (RU)

Reviews

• Keenetic 4G (KN-1210) on ComPress (RU)

PCB ID: 2050500988 (TP-LINK)

Flashing

Flashing OpenWrt

Support started version: ?
Current supported version: ?
Comment:
Unofficially

Please insert instructions here

JTAG-Serial Info

Serial

TFTP • >>
TFTP from server 192.168.1.2; our IP address is 192.168.1.1 Filename 'KN-1210_recovery.bin'.

boot, mtd, etc (KN-1210_stable_3.03.C.10.0-0 version firmware 2020-02-13) • >>

U-Boot 1.1.3 [4.0.0.4-10] (Nov 22 2017 - 08:09:11) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fb0000 ****************************** Software System Reset Occurred ****************************** MediaTek SPI BBU flash driver, SPI clock: 32MHz flash manufacture id: c8, device id 40 18 find flash: GD25Q128CSIG ============================================ Ralink UBoot Version: 4.0.0.4_NDMS -------------------------------------------- ASIC 7628_MP (Port5<->None) DRAM component: 512 Mbits DDR, width 16 DRAM bus: 16 bit Total memory: 64 MBytes Flash component: SPI Flash Date:Nov 22 2017 Time:08:09:11 ============================================ icache: sets:512, ways:4, linesz:32, total:65536 dcache: sets:256, ways:4, linesz:32, total:32768 ##### The CPU freq = 580 MHZ #### estimate memory size = 64 Mbytes Resetting MT7628 PHY... Dual image: on Boot active: 1 Boot backup: 1 Boot fails: 0 Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Enter boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. 0 3: System Boot system code via Flash. ## Booting image at bc050000 ... Image Name: KN-1210 Created: 2020-02-13 14:57:37 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1377084 Bytes = 1.3 MB Load Address: 80000000 Entry Point: 80303eac Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80303eac) ... ## Giving linux memsize in MB, 64 Starting kernel ... LINUX started... Linux version 4.9-ndm-4 (developers@ndmsystems.com) (gcc version 8.3.0 (crosstool-NG 1.24.0-rc2-ndm-7 - NDMS Toolkit 1.0.0) ) #2 Mon Feb 10 19:32:16 MSK 2020 MediaTek SoC: MT7628A, RevID: 0102, RAM: DDR2, XTAL: 40MHz CPU/OCP/SYS frequency: 580/193/193 MHz SoC power status: Soft reset occured CPU0 revision is: 00019655 (MIPS 24KEc) Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Zone ranges: Normal [mem 0x0000000000000000-0x0000000003ffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x0000000003ffffff] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS0,57600n8 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Writing ErrCtl register=00079cf0 Readback ErrCtl register=00079cf0 Memory: 60724K/65536K available (3080K kernel code, 244K rwdata, 588K rodata, 144K init, 84K bss, 4812K reserved, 0K cma-reserved) NR_IRQS:40 Setting up vectored interrupts clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns console [ttyS0] enabled Calibrating delay loop... 385.02 BogoMIPS (lpj=770048) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: -1, 3072 bytes) NET: Registered protocol family 16 clocksource: Switched to clocksource MIPS NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Load Ralink WDG Timer Module workingset: timestamp_bits=29 max_order=14 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher io scheduler noop registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A Registering NDM partitions parser MediaTek BBU SPI flash driver, SPI clock: 32MHz SPI flash chip: GD25Q128CSIG (c8 4018c840) (16384 Kbytes) Bootloader is up to date di: active = 1, backup = 1, current = 1 14 ndmpart partitions found on MTD device raspi Creating 14 MTD partitions on "raspi": 0x000000000000-0x000000030000 : "U-Boot" 0x000000030000-0x000000040000 : "U-Config" 0x000000040000-0x000000050000 : "RF-EEPROM" 0x000000050000-0x0000001c0000 : "Kernel_1" 0x0000001c0000-0x0000007e0000 : "RootFS_1" mtd: device 4 (RootFS_1) set to be root filesystem 0x000000050000-0x0000007e0000 : "Firmware_1" 0x0000007e0000-0x0000007f0000 : "Config_1" 0x0000007f0000-0x000000800000 : "Dump" 0x000000800000-0x000000830000 : "U-State" 0x000000830000-0x000000840000 : "U-Config_res" 0x000000840000-0x000000850000 : "RF-EEPROM_res" 0x000000850000-0x000000fe0000 : "Firmware_2" 0x000000fe0000-0x000000ff0000 : "Config_2" 0x000000000000-0x000001000000 : "Full" tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 32768 max) ctnetlink v0.93: registering with nfnetlink. Fast NAT loaded ip_set: protocol 6 ipip: IPv4 and MPLS over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 17 ubridge: Tiny bridge driver, 1.2 8021q: 802.1Q VLAN Support v1.8 VFS: Mounted root (squashfs filesystem) readonly on device 31:4. Freeing unused kernel memory: 144K This architecture does not have kernel memory protection. RNG reseed started random: crng init done RNG reseeded init: init process was started. init: press Enter to activate this console. [I] Jan 1 00:00:05 ndm: Core::Main: *** [I] Jan 1 00:00:05 ndm: Core::Main: *** Network Device Manager 3.03.C.10.0-0. [I] Jan 1 00:00:05 ndm: Core::Main: *** Built Feb 10 2020 19:24:47. [I] Jan 1 00:00:05 ndm: Core::Main: *** [I] Jan 1 00:00:08 ndm: Core::System::Mtd::Table: current firmware image index is 1. [I] Jan 1 00:00:08 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_nat_proto_gre.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-SCSI subsystem initialized 4/usb-common.ko. [I] Jan ip_gre: GRE over IPv4 tunneling driver 1 00:00:09 ndm: Cornf_conntrack_rtsp: loading out-of-tree module taints kernel. e::System::Drivenf_conntrack_rtsp v0.7 loading rManager: loading /lib/modules/4phr: module license 'Proprietary' taints kernel. .9-ndm-4/crypto_Disabling lock debugging due to kernel taint null.ko. [phr: I/O peripheral driver. (C) 2013-2019, NDM Systems Inc., v2.2.34 I] Jan 1 00:00:phr: "KN-1210" platform driver loaded 09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4nacct: init, v 1.3 /udp_tunnel.ko. [I] Jan 1mtdoops_proc: Attached to MTD device 7 00:00:09 nresetnds: Module loaded. dm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/scsi_mod.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/ip_gre.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_rtsp.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/phr.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_proto_gre.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/ip6_udp_tunnel.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nls_base.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_h323.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nacct.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/mtdoops_proc.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/resetnds.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modusbcore: registered new interface driver usbfs ules/4.9-ndm-4/cusbcore: registered new interface driver hub drom.ko. [usbcore: registered new device driver usb I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_conntrack_pptp.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/usbcore.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_nat_h323.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/nf_nat_pptp.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/4.9-ndm-4/usbserial.ko.

Pictures

User Images

• 
•