Linksys Velop VLP01 v1
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC1200) | |||||
|---|---|---|---|---|---|
| Velop Dual Band AC1200 Mesh WiFi System | |||||
|
| |||||
| Wikipedia | Linksys routers | ||||
| 3rd Party Firmware | |||||
| dd-wrt | Status Unknown | ||||
| OpenWrt | Supported | ||||
| Tomato any flavor | Incompatible | ||||
| Gargoyle | Status Unknown | ||||
| Platform | |||||
| Brand • Model • Rev | Linksys Velop VLP01 v1 | ||||
| FCC ID | Q87-03331 | ||||
| Type | wireless system | ||||
| CPU1 | Qualcomm IPQ4018 | ||||
| CPU1 Type | ARMv7 Cortex-A7 | ||||
| CPU1 Speed | 716 MHz ( 4 cores ) | ||||
| Flash1 Chip | Brand? Model? | ||||
| Flash1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND) | ||||
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> | ||||
| RAM1 Chip | Brand? Model? | ||||
| ETH chip1 | Qualcomm IPQ4018 | ||||
| Switch | Qualcomm Atheros QCA8072 | ||||
| Ethernet Port Count | 2-1GbE-LAN | ||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types | none specified | ||||
| Power | 12 VDC, 1 A | ||||
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | ||||
|
Flags: | |||||
|
| |||||
| Other | |||||
|
| |||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||
| Retail | |||||
| (Est.) release date | 06 September 2019 | ||||
| ASIN |
B07H2KHM87 | ||||
| Radio 1 | |||||
| Chip1 | Qualcomm IPQ4018 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | none specified | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11b/g/n | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11g | up to 54 Mbps | ||||
| 802.11b | up to 11 Mbps | ||||
| WiFi Operating Frequency | 2.4 GHz | ||||
| Radio 2 | |||||
| Chip1 | Qualcomm IPQ4018 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | none specified | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11a/n/ac | ||||
| 802.11ac | up to 867 Mbps | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11a | up to 54 Mbps | ||||
| WiFi Operating Frequency | 5 GHz | ||||
| |||||
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Linksys devices with specifications, see Linksys.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: ipq40xx
Subtarget: generic
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: unknown
Current supported version: 24.10.4
Subtarget: generic
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: unknown
Current supported version: 24.10.4
LAN Hardware: Qualcomm Atheros QCA8072
WLAN Hardware: Qualcomm Atheros IPQ4018
Installation method(s):
U-Boot TFTP recovery, see git-commit
WLAN Hardware: Qualcomm Atheros IPQ4018
Installation method(s):
U-Boot TFTP recovery, see git-commit
| git • >> |
|---|
ipq40xx: add device alias for Linksys VLP01 Both devices, the Linksys WHW01 and the VLP01, are essentially the same device. Even Linksys provides only one image for both devices which uses the WHW01 identifier in the image header. |
Categories:
- Linksys
- Embedded system/wireless system
- Embedded System Qualcomm
- Embedded System IPQ4018
- Qualcomm
- Embedded System ARMv7
- Embedded System Cortex-A7
- Embedded System Qualcomm Atheros
- Embedded System QCA8072
- Qualcomm Atheros
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation