Linksys WRT610N v2
From TechInfoDepot
Jump to navigationJump to search
abgn (AN600) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Simultaneous Dual-N Band Wireless Router | |||||||||||||
![]() | |||||||||||||
Support | Support page | ||||||||||||
Wikipedia | Linksys routers | ||||||||||||
WikiDevi.wi-cat.ru | Linksys WRT610N v2 | ||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt | Supported | ||||||||||||
OpenWrt | Supported | ||||||||||||
Tomato any flavor | Supported | ||||||||||||
Gargoyle | Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev | Linksys WRT610N v2 | ||||||||||||
Serial number prefix | CTG1 | ||||||||||||
FCC ID | Q87-WRT610NV2 | ||||||||||||
IC ID | 3839A-WRT610NV2 | ||||||||||||
Type | wireless router | ||||||||||||
CPU1 ![]() | Broadcom BCM4718A1 | ||||||||||||
CPU1 Type | MIPS 74Kc | ||||||||||||
CPU1 Speed | 480 MHz | ||||||||||||
Flash1 Chip | Eon EN29LV640B | ||||||||||||
Flash1 Size | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||
RAM1 Chip | SK hynix H5PS5162FFR | ||||||||||||
ETH chip1 | Broadcom BCM4718A1 | ||||||||||||
Switch | Broadcom BCM53115 | ||||||||||||
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||||||||||
Wired Standard | IEEE 802.3i/3u/3ab | ||||||||||||
Stock bootloader | CFE | ||||||||||||
Expansion IF types | USB 2.0 | ||||||||||||
USB ports | 1 | ||||||||||||
USB Hub Compatible | Untested | ||||||||||||
Power | 12 VDC, 2 A | ||||||||||||
Connector type | barrel | ||||||||||||
Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | ||||||||||||
| |||||||||||||
| |||||||||||||
Other | |||||||||||||
Default IP address: 192.168.1.1 | |||||||||||||
Manuf/OEM/ODM | CyberTAN | ||||||||||||
3rd Party Firmware Support |
DD-WRT • (List) , OpenWrt • (List | Dev | DLs) , TomatoUSB • (List | DLs) | ||||||||||||
Retail | |||||||||||||
Availability | End of Life | ||||||||||||
FCC approval date | 29 July 2009 | ||||||||||||
UPC |
745883585205 (UPC DB, On eBay) | ||||||||||||
ASIN |
B001AZ01EO ![]() multiple uses | ||||||||||||
Country of manuf | China | ||||||||||||
Radio 1 (eth1 (wl0)) | |||||||||||||
Chip1 | Broadcom BCM4718A1 | ||||||||||||
Wireless interface OUI | 00:25:9C, 68:7F:74 | ||||||||||||
Antenna Connector Type | none specified | ||||||||||||
MIMO status | 2x2:2 | ||||||||||||
Wireless Standard | IEEE 802.11b/g/n | ||||||||||||
802.11n | up to 300 Mbps | ||||||||||||
802.11g | up to 54 Mbps | ||||||||||||
802.11b | up to 11 Mbps | ||||||||||||
WiFi Operating Frequency | 2.4 GHz | ||||||||||||
Radio cor_rev | 17 | ||||||||||||
Radio 2 (eth2 (wl1)) | |||||||||||||
Chip1 | Broadcom BCM4322 | ||||||||||||
Wireless interface OUI | 00:25:9C, 68:7F:74 | ||||||||||||
Antenna Connector Type | U.FL | ||||||||||||
MIMO status | 2x2:2 | ||||||||||||
Wireless Standard | IEEE 802.11a/n | ||||||||||||
802.11n | up to 300 Mbps | ||||||||||||
802.11a | up to 54 Mbps | ||||||||||||
WiFi Operating Frequency | 5 GHz | ||||||||||||
Radio cor_rev | 16 | ||||||||||||
| |||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Linksys devices with specifications, see Linksys.
Overview
"3763-40300105R" is silkscreened on the board in the FCC photos.
- WRT610N v2 Serial No (S/N) appear to start with CTG1.
Links of Interest
Wikis
- Linksys routers page on Wikipedia
- WRT610N on OpenWrt wiki - OpenWRT works, you will need to build
- it with broadcom-wl to achieve full speed and make use of both radios.
Forum threads
- WRT610N thread on the DD-WRT forums
- WRT610N - Status thread on the DD-WRT forums
- Change your 610n V2 into an E3000 - Amended on the DD-WRT forums
- Unbrick/Install WRT610N v1&v2 using TFTP on the DD-WRT forums
- (label shot, 00:25:9C OUI)
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Support started version: ?
Current supported version: ?
Current supported version: ?
Please insert instructions here
Flashing OpenWrt
![]() | Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: bcm47xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mipsel_mips32
Support started version: 14.07
Current supported version: 24.10.2
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: bcm47xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mipsel_mips32
Support started version: 14.07
Current supported version: 24.10.2
Please insert instructions here
Flashing Tomato
Please insert instructions here
JTAG-Serial Info
Serial
Categories:
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4718A1
- Broadcom
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System BCM53115
- Manuf CyberTAN
- DD-WRT Supported
- OpenWrt Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System BCM4322
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation