Luxul ABR-4500
From TechInfoDepot
Jump to navigationJump to search
| Epic 4 - Multi-WAN Gigabit Router | |
 | |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Status Unknown |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Luxul ABR-4500 |
| Type | router |
CPU1  | Broadcom BCM47094 |
| CPU1 Type | ARM Cortex-A9 |
| CPU1 Speed | 1.4 GHz ( 2 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Broadcom BCM47094 |
| Switch | Broadcom BCM53012 |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Expansion IF types | USB 3.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 100-240 VAC ~ 50/60 Hz, 0.3 A |
| Connector type | AC (direct) |
| Serial Port (UART) | yes |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| Availability | End of Life |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: bcm53xx
Subtarget: generic
Package architecture: arm_cortex-a9
Supported Since Commit
Support started version: 19.07.2
Current supported version: 24.10.4
Subtarget: generic
Package architecture: arm_cortex-a9
Supported Since Commit
Support started version: 19.07.2
Current supported version: 24.10.4
LAN Hardware: Broadcom BCM53012
WLAN Hardware: none
WLAN Comment: No WLAN
Installation method(s):
GUI OEM, see git-commit
Install Comment:
Luxul firmware version 6.4.0 or newer required for OpenWrt flashing
WLAN Hardware: none
WLAN Comment: No WLAN
Installation method(s):
GUI OEM, see git-commit
Install Comment:
Luxul firmware version 6.4.0 or newer required for OpenWrt flashing
| git • >> |
|---|
bcm53xx: build images for Luxul ABR-4500 and XBR-4500 routers Luxul ABR-4500 and XBR-4500 devices are wired routers with 5 Ethernet ports and 1 USB 3.0 port. Flashing requires using Luxul firmware 6.4.0 or newer and uploading firmware using "Firmware Update" web UI page. |
