M5Stack CoreMP135 Development Kit
| development board | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | M5Stack CoreMP135 Development Kit |
| Type | development board |
| CPU1 | STMicro STM32MP135D |
| CPU1 Speed | 1.0 GHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | ? MiB |
| RAM1 Size | 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | Micron MT41K256M16TW-107:P |
| ETH chip1 | STMicro STM32MP135D |
| ETH chip2 | Realtek RTL8211F |
| ETH chip3 | Realtek RTL8211F |
| Ethernet Port Count | 2-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | U-Boot 2021.10 stm32mp-r1 |
| Stock FW OS | Linux 5.15.118 Debian 12 |
| Expansion IF types | USB 2.0 |
| USB ports | 3 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 2 A |
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) | yes, console, USB (Type-C) Female, (115200 8N1) |
|
Flags: | |
|
Additional chips | |
| Other | |
|
Default IP address: acquired via DHCP | |
| Manuf/OEM/ODM | M5Stack |
| Retail | |
| (Est.) release date | April 2024 |
| (Est.) initial retail price (in USD): | $75 |
| ASIN |
B0F1B16XZB |
| Country of manuf | China |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented STMicro chipsets with specifications, see STMicro.
M5Stack Core Development Board
Links
- CoreMP135 on M5Stack Developer Center
- M5Stack CoreMP135 – A Linux-powered industrial controller on CNX-Software
- M5Stack CoreMP135: A Versatile Linux Industrial Control Host on LinuxGizmos
- M5Stack Launches the STMicro STM32MP135-Powered CoreMP135 Module on Hackster.io
Specifications
- CPU: STMicro STM32MP135D
- Single-core ARM (Cortex A-7) @1.0GHz
- Storage: TF card (max.128GB)/MMC card slot
- Memory: 512MB (DDR3L) SDRAM
- Network: 2x Gbe LAN ports
- USB: 2x USB 2.0 Type-A, 1x USB 2.0 (Type-C) OTG/power ports
- Power Source: 9-24V/2A via DC power socket or
- 5V@3A via USB (Type-C)