Methode eDPU
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
 | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Methode eDPU |
| Type | single-board computer |
CPU1  | Marvell 88F3720 |
| CPU1 Type | ARMv8 Cortex-A53 |
| CPU1 Speed | 1.0 GHz ( 2 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (eMMC) |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3) |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Marvell 88F3720 |
| ETH chip2 | MaxLinear Model? |
| Switch | Marvell 88E6361 |
| Ethernet Port Count | 1-2.5GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab/3bz |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | SFP, USB 2.0 |
| USB ports | 1 |
| SFP ports | 1 |
| USB Hub Compatible | Untested |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented MaxLinear (Intel) chipsets with specifications, see MaxLinear (Intel).
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: mvebu
Subtarget: cortexa53
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 24.10.5
Subtarget: cortexa53
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 24.10.5
LAN Hardware: Marvell 88E6361
LAN Comment: SFP supports 2.5G, MaxLinear 2.5Gbe Phy
WLAN Comment: No WLAN
Installation method(s):
see git-commit
Comment:
eMMC is 4GB
LAN Comment: SFP supports 2.5G, MaxLinear 2.5Gbe Phy
WLAN Comment: No WLAN
Installation method(s):
see git-commit
Comment:
eMMC is 4GB
| git • >> |
|---|
mvebu: add Methode euroDPU support Add support for Methode euroDPU which is based on uDPU but does not have a second SFP cage, instead of which a Maxlinear G.hn IC is used. PHY mode is set to 1000Base-X despite Maxlinear IC being capable of 2500Base-X since until 5.15 support for mvebu is available trying to use 2500Base-X will cause buffer overruns for which the fix is not easily backportable. Installation instructions: 1. Boot the FIT initramfs image (openwrt-mvebu-cortexa53-methode_edpu-initramfs.itb) 2. sysupgrade using the openwrt-mvebu-cortexa53-methode_edpu-firmware.tgz |
