MikroTik RouterBOARD DISC Lite5 ac (RBDiscG-5acD)

From TechInfoDepot
Jump to navigationJump to search
an+ac (AC867)
Outdoor 5GHz 802.11a/n/ac wireless device
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev MikroTik RouterBOARD DISC Lite5 ac
Model Part Number RBDiscG-5acD
FCC ID none specified
Type access point, CPE
CPU1 checkY Qualcomm Atheros IPQ4018
CPU1 Type ARMv7 Cortex-A7
CPU1 Speed 716 MHz ( 4 cores )
Flash1 Chip Brand? Model?
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 Qualcomm Atheros IPQ4018
Ethernet Port Count 1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader RouterBOOT
Expansion IF types none specified
PoE Passive
Power 10-30 VDC, ? A
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 Qualcomm Atheros IPQ4018
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented MikroTik devices with specifications, see MikroTik.

• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC867 class

Flashing

Flashing OpenWrt

Target: ipq40xx
Subtarget: mikrotik
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 21.02.2
Current supported version: 25.12.5
WLAN Hardware: Qualcomm Atheros IPQ4018
Installation method(s):
Mikrotik TFTP, see devicepage
Install Comment:
Select bootp method in RouterBOARD menu, not dhcp
Comment:
Same hardware like Mikrotik RBSXTsqG-5acD (SXTsq 5 ac) with better 21dBi antenna
git • >> 
ipq40xx: add support for MikroTik SXTsq 5 ac
This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD),
an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet
port.

Specifications:
 - SoC: Qualcomm Atheros IPQ4018
 - RAM: 256 MB
 - Storage: 16 MB NOR
 - Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae
 - Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in
 - 1x Ethernet LED (green)
 - 7x user-controllable LEDs
  · 1x power (blue)
  · 1x user (green)
  · 5x rssi (green)

Note:
 Serial UART is probably available on the board, but it has not been
 tested.

Flashing:
 Boot via TFTP the initramfs image. Then, upload a sysupgrade image
 via SSH and flash it normally. More info at the "Common procedures
 for MikroTik products" page https://openwrt.org/toh/mikrotik/common.
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=MikroTik_RouterBOARD_DISC_Lite5_ac_(RBDiscG-5acD)&oldid=537704"