MikroTik RouterBOARD wAP R ac (RBwAPGR-5HacD2HnD)

multiple revisions of this device, use caution
abgn+ac (AC1200)
	Small weatherproof Dual Band 2.4 / 5 GHz wireless access point with LTE antennas and miniPCI-e slot
Homepage	Product page
WikiDevi.wi-cat.ru	MikroTik RouterBOARD wAP R ac (RBwAPGR-5HacD2HnD)
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	MikroTik RouterBOARD wAP
Model Part Number	RBwAPGR-5HacD2HnD
FCC ID	TV7WAPGR5AC2D
Board ID	wAPGR 5HacD2HnD
Type	outdoor access point
CPU1	Qualcomm IPQ4018
CPU1 Type	ARMv7 Cortex-A7
CPU1 Speed	717 MHz ( 4 cores )
Flash1 Chip	Winbond Model?
Flash1 Size	16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size	128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip	Nanya Model?
ETH chip1	Qualcomm IPQ4018
Switch	Qualcomm IPQ4018
Ethernet Port Count	1-1GbE-WAN; 1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
	802dot11 OUI: 74:4D:28 (1 E, 1 W); Ethernet OUI: 74:4D:28 (1 E, 1 W)
Stock bootloader	RouterBOOT
Stock FW OS	RouterOS Level 4
Expansion IF types	Mini PCIe, SIM Card slot
SIM Card slot	1
Mini PCIe slots	1
PoE	802.3at, 802.3af, standard
Power	10-57 VDC, ? A
Connector type	barrel; 5.5 mm (OD); 2 mm (ID); 12 mm (LEN)
	Flags:; LTE antenna
Other
	Default IP address: 192.168.88.1; the IP 192.168.88.1 is used by 49 additional devices; of which 48 are MikroTik devices;
Manuf/OEM/ODM	MikroTik
3rd Party Firmware Support	OpenWrt • (List \| Dev \| DLs);
Retail
FCC approval date	30 April 2019
(Est.) release date	2019
(Est.) initial retail price (in USD):	$129
EAN	4752224004949 ; (UPC DB, On eBay);
ASINs	B08438VZX3 ; B07VRZHY8D ; B083TTSXNH ; B08437ZV44 ; B0843SNXSH
Country of manuf	Latvia
Radio 1
Chip1	Qualcomm IPQ4018
Wireless interface OUI	74:4D:28
Antenna Connector Type	U.FL (internal, glued)
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Qualcomm IPQ4018
Wireless interface OUI	74:4D:28
Antenna Connector Type	U.FL (internal, glued)
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.

For a list of all currently documented MikroTik devices with specifications, see MikroTik.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),

• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1200 class

Overview

Also sold as MikroTik wAP 4G kit and Mikrotik wAP LTE kit with a included MikroTik mobile broadband Mini PCIe card.

The MikroTik RouterBOARD wAP AC (RBwAPG-5HacD2HnD) (new revision with a D instead of T) seems to be the same device without Mini PCIe slot and mobile broadband peripherals (SIM slot, antennas, etc.).

Flashing

NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum

Target: ipq40xx
Subtarget: mikrotik
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.5

LAN Hardware: Qualcomm Atheros QCA8075
WLAN Hardware: Qualcomm Atheros IPQ4018
WLAN Comment: 2.4GHz: 2X2 MIMO, 5GHz: 2X2 MIMO
Installation method(s):
Mikrotik TFTP
Recovery method(s):
Mikrotik TFTP

git • >>

ipq40xx: add MikroTik wAP ac (RBwAPG-5HacD2HnD) support
The MikroTik wAP ac (RBwAPG-5HacD2HnD) is a dual-band dual-radio
802.11ac wireless access point with integrated antenna and two Ethernet
ports in a weatherproof enclosure. See
https://mikrotik.com/product/wap_ac for more information.

Important: this is the new ipq40xx-based wAP ac, not the older
ath79-based wAP ac (RBwAPG-5HacT2HnD), already supported in OpenWrt.

Specifications:
 - SoC: Qualcomm Atheros IPQ4018
 - CPU: 4x ARM Cortex A7
 - RAM: 128MB
 - Storage: 16MB NOR flash
 - Wireless
    - 2.4GHz: Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae
    - 5GHz: Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae
 - Ethernet: Built-in IPQ4018 (SoC, QCA8075), 2x 1000/100/10Mb/s ports,
   one with 802.3af/at PoE in

Installation:
Boot the initramfs image via TFTP, then flash the sysupgrade image using
sysupgrade. Details at https://openwrt.org/toh/mikrotik/common.

Notes:
This preserves the MAC addresses of the physical Ethernet ports:
 - eth0 corresponds to the physical port labeled ETH1 and has the base
   MAC address. This port can be used to power the device.
 - eth1 corresponds to the physical port labeled ETH2 and has a MAC
   address one greater than the base.

MAC addresses are set from /lib/preinit/05_set_iface_mac_ipq40xx.sh
rather than /etc/board.d/02_network so that they are in effect for
preinit. This should likely be done for other MikroTik devices and
possibly other non-MikroTik devices as well.

As this device has 2 physical ports, they are each connected to their
respective PHYs, allowing the link status to be visible to software.
Since they are not marked on the case with any role (such as LAN or
WAN), both are bridged to the lan network by default, although this can
easily be changed if needed.

Pictures

Retail Images

User Images

board top, antennas and Mini PCIe heat spreader removed

MikroTik RouterBOARD wAP R ac (RBwAPGR-5HacD2HnD)

Overview

Flashing

Flashing OpenWrt

Pictures

See also

Models

Navigation menu

Page actions

Page actions

Personal tools

empty section

Search

Navigation

data/misc

Tools

query forms

Shoutwiki

ShoutWiki messages