MikroTik wAP ac LTE (RBwAPGR-5HacD2HnD&R11e-LTE)
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1200) | |
---|---|
access point | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
MikroTik wAP ac LTE |
Model Part Number |
RBwAPGR-5HacD2HnD&R11e-LTE |
FCC ID |
none specified |
Type |
access point |
CPU1 |
Qualcomm IPQ4018 |
CPU1 Type |
ARMv7 Cortex-A7 |
CPU1 Speed |
716 MHz ( 4 cores ) |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Qualcomm IPQ4018 |
Switch |
Qualcomm Atheros QCA8075 |
Ethernet Port Count |
2-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
RouterBOOT |
Expansion IF types |
Mini PCIe |
Mini PCIe slots |
1 |
PoE |
802.3at, 802.3af, standard |
Power |
10-57 VDC, ? A |
Connector type |
barrel |
Flags: LTE | |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
Qualcomm IPQ4018 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Qualcomm IPQ4018 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented MikroTik device with specifications, see MikroTik.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ipq40xx
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 23.05.0
Current supported version: 23.05.5
OpenWrt Target: ipq40xx
OpenWrt Subtarget: mikrotik
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 23.05.0
Current supported version: 23.05.5
Please insert instructions here
Categories:
- MikroTik
- Embedded system/access point
- Embedded System Qualcomm
- Embedded System IPQ4018
- Qualcomm
- Embedded System ARMv7
- Embedded System Cortex-A7
- Embedded System Qualcomm Atheros
- Embedded System QCA8075
- Qualcomm Atheros
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation