Mocet IG7500

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
wireless router,analog phone gateway
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Mocet IG7500
FCC ID none specified
Type wireless router, analog phone gateway
CPU1 Brand? Model?
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Brand? Model?
Switch IC+ IP175D
Ethernet Port Count 1-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types USB 2.0, microSD, Mini PCIe
Mini PCIe slots 1
USB ports 2
SD/MMC Slots 1
USB Hub Compatible Untested
Power 12 VDC, 1.5 A
Connector type barrel
Other

Default login user: admin1234
Default login password: 123456
admin1234:123456 credentials used by 1 additional devices
of which 0 are Mocet devices

Manuf/OEM/ODM Tecom
Radio 1
Radio1 module Wistron NeWeb DNXA-97
Radio1 module IF Mini PCIe (half)
Chip1 Atheros AR9287
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented IC+ chipsets with specifications, see IC+.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"613-181023R R02" is silkscreened on the board in the FCC photos. "48DNXA04.0GA" and "2010/03/17" is silkscreened on the wireless module (Wistron NeWeb manuf., aka Unex DNXA-97).

Possible 00:19:15 OUI (on the FCC sample label, possibly ethernet only) or 90:A4:DE (FCC manual, probably WLAN only)

Default credentials are from the FCC submitted manual. The manual specifies the default IP as 192.168.1.1 but shows an IP of 172.17.215.72 in the sample password prompt. The default SSID pattern may be IG7500_XXXXX.

Gigabit WAN, 10/100 LAN?