NXP FRWY-LS1046A
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
|
| |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | NXP FRWY-LS1046A |
| Type | single-board computer |
| CPU1 | Freescale (NXP) LS1046A |
| CPU1 Type | ARM Cortex-A72 |
| CPU1 Speed | 1.6 GHz ( 4 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
| Flash2 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Size | 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Freescale (NXP) LS1046A |
| Switch | Freescale (NXP) LS1046A |
| Ethernet Port Count | 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | M.2 Type-E NGFF slot, USB 3.0 |
| USB ports | 2 |
| M.2 Slots | 2 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 5 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 5V TTL, (115200 8N1) |
| JTAG Port | yes |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented NXP devices with specifications, see NXP.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: layerscape
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_cortex-a72
Support started version: 21.02.0
Current supported version: 24.10.2
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_cortex-a72
Support started version: 21.02.0
Current supported version: 24.10.2
WLAN Comment: WLAN dependent on M.2 cards installed
Comment:
mikroBUS Click expansion connector
Comment:
mikroBUS Click expansion connector
Please insert instructions here