NXP LS1028ARDB
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
 | |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | NXP LS1028ARDB |
| Type | single-board computer |
CPU1  | NXP LS1028A |
| CPU1 Type | ARM Cortex-A72 |
| CPU1 Speed | 1.3 GHz ( 2 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
| Flash2 Size | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (eMMC) |
| RAM1 Size | 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | NXP LS1028A |
| Switch | NXP LS1028A |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | M.2 Type E slots with PCIe Gen 3.0, USB 3.0, M.2 Type B slot with SATA 3.0 (resistor mux with 1 Type E slot) |
| Mini PCIe slots | 1 |
| USB ports | 2 |
| SATA Ports | 1 |
| M.2 Slots | 2 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 5 A |
| Connector type | barrel |
| Serial Port (UART) | yes, (115200 8N1) |
| JTAG Port | yes |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.
For a list of all currently documented NXP devices with specifications, see NXP.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: layerscape
Subtarget: armv8_64b
Package architecture: aarch64_generic
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.5
Subtarget: armv8_64b
Package architecture: aarch64_generic
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.5
LAN Comment: NXP LS1028A Felix
WLAN Comment: WLAN dependent on mPCIe cards installed
Installation method(s):
SD card
Recovery method(s):
SD card
Comment:
2x mikroBUS Click expansion connectors
WLAN Comment: WLAN dependent on mPCIe cards installed
Installation method(s):
SD card
Recovery method(s):
SD card
Comment:
2x mikroBUS Click expansion connectors
| git • >> |
|---|
layerscape: Add ls1028ardb support Add support for NXP LS1028ARDB reference board. It's a dual core Coretex-A53 board with 4G RAM and 5 Eternet ports (4 ports are connected to MSCC Felix switch). The original layout of NXP board has been kept but firmware images are adapted to be more sysupgrade friendly. At the moment NOR and SD boots are supported. NOR flash instructions: * make sd card with sdboot image * boot * write firmware image to spi flash $ mtd write /tmp/openwrt-layerscape-armv8_64b-fsl_ls1028a-rdb- squashfs-firmware.bin /dev/mtd0 * change jumper to NOR boot and reset V3: * Added board specific network defaults for lan/wan v2: * Added INA220 curent monitor, PCF2129 RTC clock and NXP SA56004ED temperature sensor to default packages * removed compat fixups for thist board Signed-off-by: Wojciech Dubowik |
