NXP LS2088ARDB
From TechInfoDepot
Jump to navigationJump to searchSingle Board Computer | |
Homepage | |
---|---|
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
NXP LS2088ARDB |
Type |
single-board computer |
CPU1 |
NXP LS2088A |
CPU1 Type |
ARMv8 Cortex-A72 |
CPU1 Speed |
2.0 GHz ( 8 cores ) 64-bit |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (NAND) |
Flash2 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NOR) |
RAM1 Size |
? MiB |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
NXP LS2088A |
Ethernet Port Count |
4-10GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab/3bz/an |
| |
Expansion IF types |
SATA, PCIe, USB 3.0 |
Mini PCI slots |
1 |
USB ports |
2 |
SATA Ports |
2 |
USB Hub Compatible |
Untested |
Serial Port (UART) |
yes |
JTAG Port |
yes |
Other | |
| |
3rd Party Firmware Support |
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.
For a list of all currently documented NXP device with specifications, see NXP.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: layerscape
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_generic
Support started version: 17.01.0
Current supported version: 23.05.5
OpenWrt Target: layerscape
OpenWrt Subtarget: armv8_64b
OpenWrt Package architecture: aarch64_generic
Support started version: 17.01.0
Current supported version: 23.05.5
Please insert instructions here