NanoPi R1
| bgn (N150) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single-board Computer | |||||||||||||||||
|
| |||||||||||||||||
| Homepage | Product page | ||||||||||||||||
| WikiDevi.wi-cat.ru | NanoPi R1 | ||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev | FriendlyARM NanoPi R1(1GB) v1.0 | ||||||||||||||||
| FCC ID fcc.io | none specified | ||||||||||||||||
| FCC ID fcc.report | none specified | ||||||||||||||||
| Type | single-board computer | ||||||||||||||||
| CPU1 | Allwinner H3 | ||||||||||||||||
| CPU1 Type | ARMv7-A Cortex-A7 | ||||||||||||||||
| CPU1 Speed | 1.2 GHz ( 4 cores ) | ||||||||||||||||
| Flash1 Chip | Samsung KLM8G1GETF-B041 | ||||||||||||||||
| Flash1 Size | 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (eMMC) | ||||||||||||||||
| RAM1 Size | ? MiB (DDR3 SDRAM) | ||||||||||||||||
| RAM1 Chip | Samsung K4B4G1646E-BCMA x 2 | ||||||||||||||||
| ETH chip1 | Allwinner H3 | ||||||||||||||||
| ETH chip2 | Realtek RTL8211E | ||||||||||||||||
| Switch | Realtek RTL8152B | ||||||||||||||||
| Ethernet Port Count |
1-100MbE-WAN 1-1GbE-LAN | ||||||||||||||||
| Wired Standard | IEEE 802.3i/3u | ||||||||||||||||
| Stock bootloader | U-Boot 2017.11 | ||||||||||||||||
| Stock FW OS | Linux 4.14.42 OpenWrt 18.06.1 | ||||||||||||||||
| Expansion IF types | USB 2.0, MicroSD Card slot | ||||||||||||||||
| USB ports | 2 | ||||||||||||||||
| SD/MMC Slots | 1 | ||||||||||||||||
| USB Hub Compatible | Untested | ||||||||||||||||
| Power | 5 VDC, 2 A | ||||||||||||||||
| Connector type | USB Female (Micro-B) | ||||||||||||||||
| Serial Port (UART) | yes, 3-pin header, populated, 3.3V TTL, (115200 8N1) | ||||||||||||||||
| JTAG Port | no | ||||||||||||||||
|
Flags: | |||||||||||||||||
|
Additional chips | |||||||||||||||||
| Other | |||||||||||||||||
|
Default SSID: OpenWrt (3 addl. devices) | |||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) , DietPi, IPFire | ||||||||||||||||
| Retail | |||||||||||||||||
| (Est.) release date | February 2019 | ||||||||||||||||
| (Est.) initial retail price (in USD): | $39 | ||||||||||||||||
| Country of manuf | China | ||||||||||||||||
| Radio 1 | |||||||||||||||||
| Radio1 module | AMPAK AP6212 | ||||||||||||||||
| Radio1 module IF | SDIO (module) | ||||||||||||||||
| Chip1 | Broadcom BCM43430 | ||||||||||||||||
| Wireless interface OUI | 8C:F7:10 | ||||||||||||||||
| Antenna Connector Type | SMA | ||||||||||||||||
| MIMO status | 1x1:1 | ||||||||||||||||
| Wireless Standard | IEEE 802.11b/g/n | ||||||||||||||||
| 802.11n | up to 150 Mbps | ||||||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented FriendlyARM devices with specifications, see FriendlyARM.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
Hardware specification
- CPU: Allwinner H3 (Quad-core ARM Cortex-A7) @1.2GHz
- GPU: Mali-400MP2 @600MHz
- Memory: 512MB/1GB (DDR3) SDRAM
- Onboard Storage: 8GB (eMMC)
- WLAN: 802.11b/g/n (1T1R) Wi-Fi, Bluetooth 4.0
- AMPAK AP6212 (Broadcom BCM43430)
- Ports: 1x GbE LAN, 1x FE WAN, 2x USB 2.0
Links of Interest
- NanoPi R1 on FriendlyARM Wiki
- Tiny, $29 IoT gateway SBC packs in WiFi and dual LAN ports on LinuxGizmos
- NanoPi R1 is an Allwinner H3 Gateway with Dual Ethernet on CNX|Software
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
OpenWrt Subtarget: cortexa7
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 21.02.0
Current supported version: 24.10.2
WLAN Comment: AMPAK AP6212 (Broadcom BCM43430), MIMO 1x1
Please insert instructions here
Pictures
- FriendlyARM
- Embedded system/single-board computer
- Embedded System Allwinner
- Embedded System H3
- Allwinner
- Embedded System ARMv7-A
- Embedded System Cortex-A7
- Embedded System RTL8211E
- Embedded System Realtek
- Realtek
- Embedded System RTL8152B
- OpenWrt Supported
- Embedded System Broadcom
- Embedded System BCM43430
- Broadcom
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- Embedded System
- English Documentation