Netcore N60 Pro

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac+ax (AX6000)
AX6000 2.5G high-speed router
Festa Gigabit VPN Router
Homepage Product page
WikiDevi.wi-cat.ru Netcore N60 Pro
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Netcore N60 Pro
FCC ID none specified
Type wireless router
CPU1 checkY MediaTek MT7986AV
CPU1 Type ARM Cortex-A53
CPU1 Speed 2.0 GHz ( 4 cores ) 64-bit
Flash1 Chip ESMT F50L1G41LB
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND)
RAM1 Size 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip ESMT M16U4G16256A
ETH chip1 MediaTek MT7986AV
ETH chip2 MaxLinear GPY211C
ETH chip3 MaxLinear GPY211C
Switch MediaTek MT7531AE
Ethernet Port Count 2-2.5GbE-WAN
3-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: none specified

Expansion IF types USB 3.0
USB ports 1
USB Hub Compatible Untested
Power 12 VDC, 2 A
Connector type barrel
Serial Port (UART) yes

Flags:
Wi-Fi 6, Mesh, WPA3

Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 MediaTek MT7986AV
Chip2 MediaTek MT7976GN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 1148 Mbps
802.11n up to 600 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7986AV
Chip2 MediaTek MT7976AN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac/ax
AX-QAM up to 4804 Mbps
802.11ax up to 2402 Mbps
802.11ac up to 1733 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Netcore N60MediaTekMediaTekMediaTek
Netcore N60 ProMediaTekMediaTekMediaTek

For a list of all currently documented MaxLinear (Intel) chipsets with specifications, see MaxLinear (Intel).
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Netcore devices with specifications, see Netcore.

• 4804 Mbps - 4SS 5GHz 802.11ax (160MHz chan., 1024-QAM),
• 1148 Mbps - 4SS 2.4GHz 802.11ax (40MHz chan., 1024-QAM) = AX6000 class

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.1
LAN Hardware: MediaTek MT7531AE
LAN Comment: 2x MaxLinear GPY211C 2.5Gbe Phy
WLAN Hardware: MediaTek MT7986AV, MediaTek MT7976GN, MediaTek MT7976AN
WLAN Comment: 4x4:4 MU-MIMO on both bands
Installation method(s):
see git-commit
git • >>
mediatek: filogic: add Netcore N60 Pro support
Hardware specification:
SoC: MediaTek MT7986A 4x A53
Flash: ESMT F50L1G41LB 128MB
RAM: M16U4G16256A DDR4 512MB
Ethernet: 2x 2.5G + 3x 1G
USB: 1x USB 3.0
WiFi1: MT7975N 2.4GHz 4T4R
WiFi2: MT7975PN 5GHz 4T4R
Button: Reset, WPS
Power: DC 12V 2A

Flash instructions:

    Connect to the router using ssh or telnet,
    username: useradmin, password is the web
    login password of the router.
    Use scp to upload bl31-uboot.fip and flash:
    "mtd write xxx-bl31-uboot.fip FIP"
    "mtd erase ubi"
    Connect to the router via the Lan port,
    set a static ip of your PC.
    (ip 192.168.1.254, gateway 192.168.1.1)
    Download initramfs image, reboot router,
    waiting for tftp recovery to complete.
    After openwrt boots up, perform sysupgrade.

Note:

    Back up all mtd partitions before flashing.