Netgear R6050

abgn+ac (AC750)
AC750 Wireless Dual Band Gigabit Router
Support	Support page
Wikipedia	Netgear
WikiDevi.wi-cat.ru	Netgear R6050
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Netgear R6050
FCC ID	PY314100253
IC ID	4054A-14100253
Type	wireless router
CPU1	MediaTek MT7620A
CPU1 Type	MIPS 24KEc
CPU1 Speed	580 MHz 32-bit
Flash1 Chip	ESMT F59L1G81A-25T
Flash1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Size	? MiB
RAM1 Chip	Nanya NT6TU64M16GG-AC x 128
ETH chip1	MediaTek MT7620A
Switch	Qualcomm Atheros QCA8337
Ethernet Port Count	1-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: 80:37:73 Ethernet OUI: 80:37:73
Stock bootloader	U-Boot 1.1.3 Ralink UBoot Version:4.1.1.0
Stock FW OS	Linux 2.6.36 MTK APSoC
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1.5 A
Connector type	barrel
Serial Port (UART)	yes, internal, 4-pin header, populated, 3.3V TTL, (57600 8N1)
Other
Default SSID: NETGEARXX (37 addl. devices) Default login user: admin Default login password: password admin:password credentials used by 425 additional devices of which 306 are Netgear devices
Manuf/OEM/ODM	SerComm
Retail
FCC approval date	30 May 2014
UPC	606449104158 (UPC DB, On eBay)
ASIN	B00KFD0O0I
Radio 1
Chip1	MediaTek MT7620A
Wireless interface OUI	80:37:73
Antenna Connector Type	none
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7610E
Wireless interface OUI	80:37:73
Antenna Connector Type	U.FL
MIMO status	1x1:1
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 433 Mbps
802.11n	up to 150 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
FCC ID Netgear JR6150 PY314100253

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Netgear device with specifications, see Netgear.

• 433 Mbps - 1SS 5GHz 802.11ac (80MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC750 class

Overview

The FCC docs seem to indicate..

• Two models are covered by this FCC ID - the R6050 and JR6150
• This router is using a MediaTek platform
• The manufacturer may possibly be DNI no, per the images below it's a SerComm manuf'ed unit

This device was under short-term confidentiality, but that expired 11/24/2014 ⚠.

Links of Interest

• On the SmallNetBuilder Forums

mediatrek notes internal images of the JR6150 are available @ openitforum.pl

Specifications are per these images.

"AM100C-1.6MM" and "JR6150" is silkscreened on the board shown.

JTAG-Serial Info

Serial

Serial Pinouts

• Note: Headers might not be populated as seen here

(Gnd)  (Tx) (3.3 Vcc) (Rx)
pin4  pin3  pin2  pin1 <

Speed	Bits	Stop Bits	Parity	Flow Control
57600	8	1	None	None

System Info Pulled from Serial Console

boot log

U-Boot 1.1.3 (Jul 4 2013 - 15:13:32) Board: Ralink APSoC DRAM: 128 MB enable ephy clock...done. rf reg 29 = 5 SSC disabled. !!! nand page size = 2048, addr len=4 .*** Warning - bad CRC, using default environment ============================================ Ralink UBoot Version: 4.1.1.0 -------------------------------------------- ASIC 7620_MP (Port5<->None) DRAM_CONF_FROM: Auto-detection DRAM_TYPE: DDR2 DRAM component: 1024 Mbits DRAM bus: 16 bit Total memory: 128 MBytes Flash component: NAND Flash Date:Jul 4 2013 Time:15:13:32 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 .. ****************************************** Uboot StandAlone Entry ****************************************** Init GIGA switch 8337 Press Ctrl+C to Enter the Main loop... 0 ****************************************** Uboot StandAlone Entry ****************************************** Flash Sector Number : 1024. Waitting for RX_DMA_BUSY status Start... done ETH_STATE_ACTIVE!! ****************************************** Uboot StandAlone Entry ****************************************** Flash Sector Number : 1024. *************************************************** Sercomm Boot Version 2.02.0 *************************************************** Entering Firmware : Everything is OK. kernel addr :0xBC200000 ## Booting image at bc200000 ... Image Name: Linux Kernel Image Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1836059 Bytes = 1.8 MB Load Address: 80000000 Entry Point: 8000c310 ............................ Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... LINUX started... THIS IS ASIC Linux version 2.6.36 (root@ubuntu) (gcc version 3.4.2) #224 Wed Oct 8 09:35:40 C ST 2014 The CPU feqenuce set to 580 MHz PCIE: bypass PCIe DLL. PCIE: Elastic buffer control: Addr:0x68 -> 0xB4 disable all power about PCIe CPU revision is: 00019650 (MIPS 24Kc) Determined physical RAM map: memory: 08000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00008000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00008000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 console=ttyS0 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Writing ErrCtl register=00055476 Readback ErrCtl register=00055476 Memory: 123916k/131072k available (4716k kernel code, 7156k reserved, 910k data, 172k init, 0k highmem) NR_IRQS:128 console [ttyS1] enabled Calibrating delay loop... 386.04 BogoMIPS (lpj=772096) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 NET: Registered protocol family 16 RALINK_GPIOMODE = 52b91d RALINK_GPIOMODE = 50b91d PPLL_CFG1=0xe44000 MT7620 PPLL lock PPLL_DRV =0x80080504 start PCIe register access RALINK_PCI_PCICFG_ADDR = 1000f0 *************** MT7620 PCIe RC mode ************* bio: create slab <bio-0> at 0 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x2020 0000-0x2020ffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x2000 0000-0x200fffff] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff] pci 0000:01:00.1: BAR 0: set to [mem 0x20100000-0x201fffff] (PCI address [0x2010 0000-0x201fffff] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] pci 0000:00:00.0: bridge window [mem pref disabled] BAR0 at slot 0 = 0 bus=0x0, slot = 0x0 res[0]->start = 0 res[0]->end = 0 res[1]->start = 20200000 res[1]->end = 2020ffff res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 bus=0x1, slot = 0x0 res[0]->start = 20000000 res[0]->end = 200fffff res[1]->start = 0 res[1]->end = 0 res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 bus=0x1, slot = 0x0 res[0]->start = 20100000 res[0]->end = 201fffff res[1]->start = 0 res[1]->end = 0 res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RT3xxx EHCI/OHCI init. squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.15) msgmni has been set to 242 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered (default) Ralink gpio driver initialized spidrv_major = 217 Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A brd: module loaded !!! nand page size = 2048, addr len=4 ra_nand_init: alloc 1448, at 87ca4000 , btt(87ca50c8, 100), ranfc_mtd:87ca52c8 Creating 22 MTD partitions on "ra_nfc": 0x000000000000-0x000000100000 : "Bootloader" 0x000000100000-0x000000200000 : "SC PID" 0x000000200000-0x000000600000 : "Kernel" 0x000000600000-0x000002200000 : "Rootfs" 0x000002200000-0x000002400000 : "English UI" 0x000002400000-0x000002600000 : "Chinese UI" 0x000002600000-0x000002800000 : "Russian UI" 0x000002800000-0x000002a00000 : "Portuguese UI" 0x000002a00000-0x000002c00000 : "German UI" 0x000002c00000-0x000002e00000 : "Other UI" 0x000002e00000-0x000002f00000 : "WiFi Data" 0x000002f00000-0x000003000000 : "SC Private Data" 0x000003000000-0x000003200000 : "POT" 0x000003200000-0x000003400000 : "Traffic Meter" 0x000003400000-0x000003600000 : "DPF" 0x000003600000-0x000003800000 : "SC Nvram" 0x000003800000-0x000003a00000 : "Ralink Nvram" 0x000003a00000-0x000003c00000 : "Ralink Reserved" 0x000003c00000-0x000003e00000 : "Reserved Block1" 0x000003e00000-0x000004000000 : "Reserved Block2" 0x000004000000-0x000004200000 : "Reserved Block3" 0x000004200000-0x000007e00000 : "Reserved Block4" Match bmt signature @ block: 0x3ff Match bmt signature @ block: 0x3fe found 2 good bmt bmt: 55 d5 55 d5 55 55 55 55 55 55 55 d5 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 d5 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 d5 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 d5 ff ff ff ff rdm_major = 253 SMACCR1 -- : 0x0000000c SMACCR0 -- : 0x43762077 init Athero switch!!! mdio_gpio_mode=0050991d reset to mdio normal mode for MDIO access! load sw_ar8327 module device id=00001302 AR8337 detected! phy4.reg.0x10=00000862 Ralink APSoC Ethernet Driver Initilization. v3.0 256 rx/tx descriptors allocate d, mtu = 1500! SMACCR1 -- : 0x0000000c SMACCR0 -- : 0x43762077 PROC INIT OK! PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 usbcore: registered new interface driver net1080 === pAd = c0045000, size = 698872 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 AP Driver version-2.7.1.6 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1 rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000 rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2 rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1936 buckets, 7744 max) nf_conntrack_rtsp v0.6.21 loading IPVS: Registered protocols () IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: ipvs loaded. GRE over IPv4 demultiplexor driver gre: can't add protocol nf_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone TCP cubic registered NET: Registered protocol family 17 L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 L2TP IP encapsulation support (L2TPv3) L2TP netlink interface L2TP ethernet pseudowire support (L2TPv3) 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Freeing unused kernel memory: 172k freed init started: BusyBox v1.12.1 (2014-09-17 11:27:24 CST) starting pid 48, tty '': '/usr/etc/rcS' Algorithmics/MIPS FPU Emulator v1.5 Welcome to _______ _______ ___ __ ____ _ _ ___ | ___ \| __ || | |__|| \ | || | / / | |___| || |__| || |__ __ | \| || |/ / | _ /| _ || || || |\ || \ |__| \__\|__| |__||______||__||_| \____||_|\___\ =System Architecture Department= led_pb_api: module license 'Sercomm' taints kernel. Disabling lock debugging due to kernel taint Register LED ID <70> Register LED ID <71> Register LED ID <20> Register LED ID <30> Register LED ID <40> Register LED ID <41> Register LED ID <42> Register LED ID <45> Register LED ID <60> Register LED ID <61> Register LED ID <90> Register LED ID <91> Register LED ID <92> Register LED ID <93> insmod: can't read '/lib/modules/2.6.30.9/kernel/fs/jbd2/jbd2.ko': No such file or directory insmod: can't read '/lib/modules/2.6.30.9/kernel/fs/ext4/netfilter dnshj choose interested dns queries module loaded ! ext4.ko': No such file or directory insmod: can't read '/lib/modules/arp_protect_enable.ko': No such file or directory init common module successful insert firewall block module success fake source dos protect modules is inserted netfilter PSD and TCP/UDP Echo/Chargen Attack loaded netfilter tcp syn flood module loaded netfilter clamp total session for one src ip module loaded netfilter other dos module loaded insmod finish Raeth v3.0 (Tasklet,SkbRecycle) phy_tx_ring = 0x07012000, tx_ring = 0xa7012000 phy_rx_ring0 = 0x07013000, rx_ring0 = 0xa7013000 SMACCR1 -- : 0x0000000c SMACCR0 -- : 0x43762077 ESW: Link Status Changed - Port5 Link UP ESW: Link Status Changed - Port4 Link UP CDMA_CSG_CFG = 81000000 GDMA1_FWD_CFG = 20710000 device eth2.1 entered promiscuous mode device eth2 entered promiscuous mode register rtpci === pAd = c0782000, size = 989576 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 pAd->CSRBaseAddress =0xc0680000, csr_addr=0xc0680000! device_id =0x7650 ==>MT76x0_WLAN_ChipOnOff(): OnOff:1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000402 MACVersion = 0x76502000 [rc debug]/usr/sbin/rc init [SYSTEM]echo "Configure 6855 ESW port base vlan mtk" Configure 6855 ESW port base vlan mtk [SYSTEM]switch reg w 2404 ff0003 switch reg write offset=2404, value=ff0003 [SYSTEM]switch reg w 2504 ff0003 switch reg write offset=2504, value=ff0003 [SYSTEM]switch reg w 2604 20ff0003 switch reg write offset=2604, value=20ff0003 [SYSTEM]switch reg w 2704 20ff0003 switch reg write offset=2704, value=20ff0003 [SYSTEM]switch reg w 2410 810000c0 switch reg write offset=2410, value=810000c0 [SYSTEM]switch reg w 2510 810000c0 switch reg write offset=2510, value=810000c0 [SYSTEM]switch reg w 2610 81000000 switch reg write offset=2610, value=81000000 [SYSTEM]switch reg w 2710 81000000 switch reg write offset=2710, value=81000000 [SYSTEM]switch reg w 2414 10001 switch reg write offset=2414, value=10001 [SYSTEM]switch reg w 2514 10002 switch reg write offset=2514, value=10002 [SYSTEM]switch vlan set 0 1 00001011 [SYSTEM]switch vlan set 1 2 00000111 [SYSTEM]switch clear REG_ESW_WT_MAglobal reg.[0x00000624]=>0x7F7F7F7F C_ATC is 0x7ff0002 done. [SYSTEM]echo write.g 0x0624 0x7F7F 0x7F7F > /pphy.[0x00000004] reg.[0x00000000]=>0x00003100 roc/sw_ar8327 [SYSTEM]echo write.p 0x0004 0x0000 0x0 0x3100 > /proc/sw_ar8327 [SYSTEM]/sbin/ifconfig br0 br0: port 1(eth2.1) entering learning state dobr0: port 1(eth2.1) entering learning state wn hw ether E4:F4:C6:47:81:B8 up [SYSTEM]/sbin/vconfig add eth2 1 vconfig: ioctl error for add: File exists [SYSTEM]/sbin/vconfig add eth2 2 vconfig: ioctl error for add: File exists [SYdevice eth2 left promiscuous mode STEbr0: port 1(eth2.1) entering learning state M]/sbin/ifconfig eth2.1 down [SYSTEM]/sbin/ifconfig eth2.1 hw ether E4:F4:C6:47:81:B8 [SYSTEM]/sbin/ifconfig eth2.1 up device eth2 entered promiscuous mode br0: port 1(eth2.1) entering learning state br0: port 1(eth2.1) entering learning state RC: wifi_init() rules = <>, timeout = 20 [rc debug]/usr/sbin/rc wlan start ap_name=wlan action=start [rc.c::rc_action():779] rc_action before add wlan - start rc action <wlan @ start> before file_lock. rc action <wlan @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.wlan.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add wlan - start [rc.c::rc_start():682] Calling Start function of wlan [flash.c::sc_get_cal():560] 2.4G power: 16 16 16 16 16 17 17 17 17 17 18 18 18 18 16 15 15 15 15 15 15 15 15 15 16 16 16 16 [flash.c::sc_get_cal():568] 5G power: 1B 1A 1A 1A 1A 1A 19 19 19 19 19 19 13 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 10 0F 0F 0F 0F 0F [SYSTEM]mkdir -p /etc/Wireless/RT2860 [SYSTEM]mkdir -p /etc/Wireless/iNIC region flag in flash:00 00 00 01 PR:0, NA:1, wifi_region: United States, power_spec: 2 [SYSTEM]/bin/cp -f /etc_ro/wlan/MT7620_AP_2T2R-4L_V15.BIN.PR /etc_ro/wlan/MT7620_AP_2T2R-4L_V15.BIN [SYSTEM]/bin/cp -f /etc_ro/Wireless/iNIC/MT7610E-V10-20130102-FEM.bin.NA /etc_ro/Wireless/iNIC/MT7610E-V10-20130102-FEM.bin [SYSTEM]/bin/cp -f /etc_ro/Wireless/RT2860AP/SingleSKU.dat.MT7620.FCC /etc_ro/Wireless/RT2860AP/SingleSKU.dat [SYSTEM]/bin/cp -f /etc_ro/Wireless/iNIC/SingleSKU.dat.MT7610E.FCC /etc_ro/Wireless/iNIC/SingleSKU.dat Check 2.4G single SKU.dat exist or not: Yes Check 5G single SKU.dat exist or not: Yes CHIP: 7620 - current MAC: E4:F4:C6:47:81:B8 Assign MAC: E4:F4:C6:47:81:B8 no update! CHIP: 7610 - current MAC: E4:F4:C6:47:81:BC Assign MAC: E4:F4:C6:47:81:bc no update! [SYSTEM]/sbin/iwpriv rai0 set RadioOn=1 Interface doesn't accept private ioctl... set (8BE2): Network is down [SYSTEM]echo 1 > /tmp/wifi_mac_set [SYSTEM]/sbin/ifconfig ra0 up RX DESC a7f1d000 size = 2048 RTMP_TimerListAdd: add timer obj c00bfaf8! RTMP_TimerListAdd: add timer obj c004e1a8! RTMP_TimerListAdd: add timer obj c004dd9c! RTMP_TimerListAdd: add timer obj c004e178! RTMP_TimerListAdd: add timer obj c004e520! RTMP_TimerListAdd: add timer obj c004e270! RTMP_TimerListAdd: add timer obj c004e2a0! RTMP_TimerListAdd: add timer obj c004e460! RTMP_TimerListAdd: add timer obj c004e490! RTMP_TimerListAdd: add timer obj c00513e0! RTMP_TimerListAdd: add timer obj c0050fd4! RTMP_TimerListAdd: add timer obj c00513b0! RTMP_TimerListAdd: add timer obj c0051758! RTMP_TimerListAdd: add timer obj c00514a8! RTMP_TimerListAdd: add timer obj c00514d8! RTMP_TimerListAdd: add timer obj c0051698! RTMP_TimerListAdd: add timer obj c00516c8! RTMP_TimerListAdd: add timer obj c0054618! RTMP_TimerListAdd: add timer obj c005420c! RTMP_TimerListAdd: add timer obj c00545e8! RTMP_TimerListAdd: add timer obj c0054990! RTMP_TimerListAdd: add timer obj c00546e0! RTMP_TimerListAdd: add timer obj c0054710! RTMP_TimerListAdd: add timer obj c00548d0! RTMP_TimerListAdd: add timer obj c0054900! RTMP_TimerListAdd: add timer obj c0057850! RTMP_TimerListAdd: add timer obj c0057444! RTMP_TimerListAdd: add timer obj c0057820! RTMP_TimerListAdd: add timer obj c0057bc8! RTMP_TimerListAdd: add timer obj c0057918! RTMP_TimerListAdd: add timer obj c0057948! RTMP_TimerListAdd: add timer obj c0057b08! RTMP_TimerListAdd: add timer obj c0057b38! RTMP_TimerListAdd: add timer obj c005aa88! RTMP_TimerListAdd: add timer obj c005a67c! RTMP_TimerListAdd: add timer obj c005aa58! RTMP_TimerListAdd: add timer obj c005ae00! RTMP_TimerListAdd: add timer obj c005ab50! RTMP_TimerListAdd: add timer obj c005ab80! RTMP_TimerListAdd: add timer obj c005ad40! RTMP_TimerListAdd: add timer obj c005ad70! RTMP_TimerListAdd: add timer obj c005dcc0! RTMP_TimerListAdd: add timer obj c005d8b4! RTMP_TimerListAdd: add timer obj c005dc90! RTMP_TimerListAdd: add timer obj c005e038! RTMP_TimerListAdd: add timer obj c005dd88! RTMP_TimerListAdd: add timer obj c005ddb8! RTMP_TimerListAdd: add timer obj c005df78! RTMP_TimerListAdd: add timer obj c005dfa8! RTMP_TimerListAdd: add timer obj c0060ef8! RTMP_TimerListAdd: add timer obj c0060aec! RTMP_TimerListAdd: add timer obj c0060ec8! RTMP_TimerListAdd: add timer obj c0061270! RTMP_TimerListAdd: add timer obj c0060fc0! RTMP_TimerListAdd: add timer obj c0060ff0! RTMP_TimerListAdd: add timer obj c00611b0! RTMP_TimerListAdd: add timer obj c00611e0! RTMP_TimerListAdd: add timer obj c0064130! RTMP_TimerListAdd: add timer obj c0063d24! RTMP_TimerListAdd: add timer obj c0064100! RTMP_TimerListAdd: add timer obj c00644a8! RTMP_TimerListAdd: add timer obj c00641f8! RTMP_TimerListAdd: add timer obj c0064228! RTMP_TimerListAdd: add timer obj c00643e8! RTMP_TimerListAdd: add timer obj c0064418! RTMP_TimerListAdd: add timer obj c0067368! RTMP_TimerListAdd: add timer obj c0066f5c! RTMP_TimerListAdd: add timer obj c0067338! RTMP_TimerListAdd: add timer obj c00676e0! RTMP_TimerListAdd: add timer obj c0067430! RTMP_TimerListAdd: add timer obj c0067460! RTMP_TimerListAdd: add timer obj c0067620! RTMP_TimerListAdd: add timer obj c0067650! RTMP_TimerListAdd: add timer obj c006a5a0! RTMP_TimerListAdd: add timer obj c006a194! RTMP_TimerListAdd: add timer obj c006a570! RTMP_TimerListAdd: add timer obj c006a918! RTMP_TimerListAdd: add timer obj c006a668! RTMP_TimerListAdd: add timer obj c006a698! RTMP_TimerListAdd: add timer obj c006a858! RTMP_TimerListAdd: add timer obj c006a888! RTMP_TimerListAdd: add timer obj c006d7d8! RTMP_TimerListAdd: add timer obj c006d3cc! RTMP_TimerListAdd: add timer obj c006d7a8! RTMP_TimerListAdd: add timer obj c006db50! RTMP_TimerListAdd: add timer obj c006d8a0! RTMP_TimerListAdd: add timer obj c006d8d0! RTMP_TimerListAdd: add timer obj c006da90! RTMP_TimerListAdd: add timer obj c006dac0! RTMP_TimerListAdd: add timer obj c0070a10! RTMP_TimerListAdd: add timer obj c0070604! RTMP_TimerListAdd: add timer obj c00709e0! RTMP_TimerListAdd: add timer obj c0070d88! RTMP_TimerListAdd: add timer obj c0070ad8! RTMP_TimerListAdd: add timer obj c0070b08! RTMP_TimerListAdd: add timer obj c0070cc8! RTMP_TimerListAdd: add timer obj c0070cf8! RTMP_TimerListAdd: add timer obj c0073c48! RTMP_TimerListAdd: add timer obj c007383c! RTMP_TimerListAdd: add timer obj c0073c18! RTMP_TimerListAdd: add timer obj c0073fc0! RTMP_TimerListAdd: add timer obj c0073d10! RTMP_TimerListAdd: add timer obj c0073d40! RTMP_TimerListAdd: add timer obj c0073f00! RTMP_TimerListAdd: add timer obj c0073f30! RTMP_TimerListAdd: add timer obj c0076e80! RTMP_TimerListAdd: add timer obj c0076a74! RTMP_TimerListAdd: add timer obj c0076e50! RTMP_TimerListAdd: add timer obj c00771f8! RTMP_TimerListAdd: add timer obj c0076f48! RTMP_TimerListAdd: add timer obj c0076f78! RTMP_TimerListAdd: add timer obj c0077138! RTMP_TimerListAdd: add timer obj c0077168! RTMP_TimerListAdd: add timer obj c007a0b8! RTMP_TimerListAdd: add timer obj c0079cac! RTMP_TimerListAdd: add timer obj c007a088! RTMP_TimerListAdd: add timer obj c007a430! RTMP_TimerListAdd: add timer obj c007a180! RTMP_TimerListAdd: add timer obj c007a1b0! RTMP_TimerListAdd: add timer obj c007a370! RTMP_TimerListAdd: add timer obj c007a3a0! RTMP_TimerListAdd: add timer obj c007d2f0! RTMP_TimerListAdd: add timer obj c007cee4! RTMP_TimerListAdd: add timer obj c007d2c0! RTMP_TimerListAdd: add timer obj c007d668! RTMP_TimerListAdd: add timer obj c007d3b8! RTMP_TimerListAdd: add timer obj c007d3e8! RTMP_TimerListAdd: add timer obj c007d5a8! RTMP_TimerListAdd: add timer obj c007d5d8! RTMP_TimerListAdd: add timer obj c0096464! RTMP_TimerListAdd: add timer obj c0096580! RTMP_TimerListAdd: add timer obj c0096490! RTMP_TimerListAdd: add timer obj c007d994! RTMP_TimerListAdd: add timer obj c004b668! RTMP_TimerListAdd: add timer obj c004e8a0! RTMP_TimerListAdd: add timer obj c0051ad8! RTMP_TimerListAdd: add timer obj c0054d10! RTMP_TimerListAdd: add timer obj c0057f48! RTMP_TimerListAdd: add timer obj c005b180! RTMP_TimerListAdd: add timer obj c005e3b8! RTMP_TimerListAdd: add timer obj c00615f0! RTMP_TimerListAdd: add timer obj c0064828! RTMP_TimerListAdd: add timer obj c0067a60! RTMP_TimerListAdd: add timer obj c006ac98! RTMP_TimerListAdd: add timer obj c006ded0! RTMP_TimerListAdd: add timer obj c0071108! RTMP_TimerListAdd: add timer obj c0074340! RTMP_TimerListAdd: add timer obj c0077578! RTMP_TimerListAdd: add timer obj c007a7b0! RTMP_TimerListAdd: add timer obj c007d6a8! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) start ch = 1, ch->num = 1 32 32 32 32 32 32 32 32 32 32 32 32 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 start ch = 2, ch->num = 1 34 34 34 34 38 38 38 38 38 38 36 34 38 38 38 38 38 38 38 34 38 38 38 38 38 38 38 34 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 start ch = 3, ch->num = 1 34 34 34 34 38 38 38 38 38 38 36 34 38 38 38 38 38 38 38 34 38 38 38 38 38 38 38 34 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 start ch = 4, ch->num = 5 34 34 34 34 38 38 38 38 38 38 36 34 38 38 38 38 38 38 38 34 38 38 38 38 38 38 38 34 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 start ch = 9, ch->num = 2 34 34 34 34 38 38 38 38 38 38 36 34 38 38 38 38 38 38 38 34 38 38 38 38 38 38 38 34 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 start ch = 11, ch->num = 1 32 32 32 32 30 30 30 30 30 30 30 30 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 start ch = 12, ch->num = 2 24 24 24 24 26 26 26 26 26 26 26 20 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 start ch = 14, ch->num = 1 24 24 24 24 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1. Phy Mode = 9 2. Phy Mode = 9 E2PROM: D0 target power=0xff28 E2PROM: 40 MW Power Delta= 0 3. Phy Mode = 9 RTMP_TimerListAdd: add timer obj c004b260! AntCfgInit: primary/secondary ant 0/1 Initialize RF Central Registers for E2 !!! Initialize RF Central Registers for E3 !!! Initialize RF Channel Registers for E2 !!! Initialize RF Channel Registers for E3 !!! Initialize RF DCCal Registers for E2 !!! Initialize RF DCCal Registers for E3 !!! Change as GPIO Mode(0x50989d) D1 = -3, D2 = 5, CalCode = 19 !!! RT6352_Temperature_Init : BBPR49 = 0xfffffffd RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff3 Current Temperature from BBP_R49=0xfffffff4 RT6352_TssiTableAdjust: upper_bound = 0x7F decimal: 127 RT6352_TssiTableAdjust: lower_bound = 0xFFFFFF80 decimal: -128 *** RT6352_TssiTableAdjust: G Tssi[-7 .. +7] = -128 -1 -1 -1 -128 -1 -1 - -1 - -1 -1 -1 -1 -1 -1 -1, offset=-13, tuning=0 RT6352_TssiTableAdjust: G Tssi[-7 .. +7] = -128 -14 -14 -14 -128 -14 -14 - -14 - -14 -14 -14 -14 -14 -14 -14, offset=-13, tuning=0 mp_temperature=0x00, step = +7 E2PROM: G Tssi[-7 .. +7] = -128 -14 -14 -14 -128 -14 -14 - -14 - -14 -14 -14 -14 -14 -14 -14, offset=-13, tuning=0 TX BW Filter Calibration !!! RX BW Filter Calibration !!! LOFT Calibration Done! IQCalibration Start! IQCalibration Done! CH = 0, (gain= d, phase=3e) IQCalibration Start! IQCalibration Done! CH = 1, (gain= d, phase=3e) TX IQ Calibration Done! Change as Normal Mode(0x40989d) After Change, now GPIO_MODE value is 0x40989d RT6352_Init_ExtPA_ExtLNA: Enable Ext-LNA. RT6352_Init_ExtPA_ExtLNA: Init Ext-LNA BBP. bAutoTxAgcG = 0 MCS Set = ff ff 00 00 01 RTMP_TimerListAdd: add timer obj c007df24! RTMP_TimerListAdd: add timer obj c00d5468! RTMP_TimerListAdd: add timer obj c00d57f4! RTMP_TimerListAdd: add timer obj c00d5498! Main bssid = e4:f4:c6:47:81:b8 <==== rt28xx_init, Status=0 0x1300 = 00064300 [SYSTEM]/sbin/brctl addif br0 ra0 device ra0 entered promiscuous mode br0: port 2(ra0) entering learning state br0: port 2(ra0) entering learning state [SYSTEM]/bin/led_app on 40 [wifi_mtk/wifi.c::update_eeprom():1320] output:ra0 e2p: [0x0050]:0xFFFF [wifi_mtk/wifi.c::u0x1328_ulmac_value = 0x% pdate_eeprom():1327] org_value:ff, new_value:ff [wifi_mtk/wifi.c::update_eeprom():1320load fw spent 16ms ] 0x730_ulmac_value = 0x% outpuRX DESC a73c0000 size = 2048 t:ra0 e2p: [0xRX1 DESC a73c1000 size = 2048 00D0]:0xFF28 [wifi_mtRTMP_TimerListAdd: add timer obj c082dadc! k/RTMP_TimerListAdd: add timer obj c0790acc! wiRTMP_TimerListAdd: add timer obj c07906c0! fiRTMP_TimerListAdd: add timer obj c0790a9c! .cRTMP_TimerListAdd: add timer obj c0790dd8! ::RTMP_TimerListAdd: add timer obj c0790d18! upRTMP_TimerListAdd: add timer obj c0790d48! daRTMP_TimerListAdd: add timer obj c0793cdc! teRTMP_TimerListAdd: add timer obj c07938d0! _eRTMP_TimerListAdd: add timer obj c0793cac! epRTMP_TimerListAdd: add timer obj c0793fe8! roRTMP_TimerListAdd: add timer obj c0793f28! m(RTMP_TimerListAdd: add timer obj c0793f58! ):RTMP_TimerListAdd: add timer obj c0796eec! 13RTMP_TimerListAdd: add timer obj c0796ae0! 27RTMP_TimerListAdd: add timer obj c0796ebc! ] RTMP_TimerListAdd: add timer obj c07971f8! orRTMP_TimerListAdd: add timer obj c0797138! g_RTMP_TimerListAdd: add timer obj c0797168! vaRTMP_TimerListAdd: add timer obj c079a0fc! luRTMP_TimerListAdd: add timer obj c0799cf0! e:RTMP_TimerListAdd: add timer obj c079a0cc! 28RTMP_TimerListAdd: add timer obj c079a408! , RTMP_TimerListAdd: add timer obj c079a348! neRTMP_TimerListAdd: add timer obj c079a378! w_RTMP_TimerListAdd: add timer obj c079d30c! vaRTMP_TimerListAdd: add timer obj c079cf00! luRTMP_TimerListAdd: add timer obj c079d2dc! e:RTMP_TimerListAdd: add timer obj c079d618! 28RTMP_TimerListAdd: add timer obj c079d558! RTMP_TimerListAdd: add timer obj c079d588! TMP_TimerListAdd: add timer obj c07a051c! 32RTMP_TimerListAdd: add timer obj c07a0110! m[RTMP_TimerListAdd: add timer obj c07a04ec! SYRTMP_TimerListAdd: add timer obj c07a0828! STRTMP_TimerListAdd: add timer obj c07a0768! EMRTMP_TimerListAdd: add timer obj c07a0798! ]/RTMP_TimerListAdd: add timer obj c07a372c! sbRTMP_TimerListAdd: add timer obj c07a3320! inRTMP_TimerListAdd: add timer obj c07a36fc! /iRTMP_TimerListAdd: add timer obj c07a3a38! fcRTMP_TimerListAdd: add timer obj c07a3978! onRTMP_TimerListAdd: add timer obj c07a39a8! fiRTMP_TimerListAdd: add timer obj c07a693c! g RTMP_TimerListAdd: add timer obj c07a6530! raRTMP_TimerListAdd: add timer obj c07a690c! i0RTMP_TimerListAdd: add timer obj c07a6c48! uRTMP_TimerListAdd: add timer obj c07a6b88! pTMP_TimerListAdd: add timer obj c07a6bb8! [0RTMP_TimerListAdd: add timer obj c07a9b4c! RTMP_TimerListAdd: add timer obj c07a9740! RTMP_TimerListAdd: add timer obj c07a9b1c! RTMP_TimerListAdd: add timer obj c07a9e58! RTMP_TimerListAdd: add timer obj c07a9d98! RTMP_TimerListAdd: add timer obj c07a9dc8! RTMP_TimerListAdd: add timer obj c07acd5c! RTMP_TimerListAdd: add timer obj c07ac950! RTMP_TimerListAdd: add timer obj c07acd2c! RTMP_TimerListAdd: add timer obj c07ad068! RTMP_TimerListAdd: add timer obj c07acfa8! RTMP_TimerListAdd: add timer obj c07acfd8! RTMP_TimerListAdd: add timer obj c07aff6c! RTMP_TimerListAdd: add timer obj c07afb60! RTMP_TimerListAdd: add timer obj c07aff3c! RTMP_TimerListAdd: add timer obj c07b0278! RTMP_TimerListAdd: add timer obj c07b01b8! RTMP_TimerListAdd: add timer obj c07b01e8! RTMP_TimerListAdd: add timer obj c07b317c! RTMP_TimerListAdd: add timer obj c07b2d70! RTMP_TimerListAdd: add timer obj c07b314c! RTMP_TimerListAdd: add timer obj c07b3488! RTMP_TimerListAdd: add timer obj c07b33c8! RTMP_TimerListAdd: add timer obj c07b33f8! RTMP_TimerListAdd: add timer obj c07b638c! RTMP_TimerListAdd: add timer obj c07b5f80! RTMP_TimerListAdd: add timer obj c07b635c! RTMP_TimerListAdd: add timer obj c07b6698! RTMP_TimerListAdd: add timer obj c07b65d8! RTMP_TimerListAdd: add timer obj c07b6608! RTMP_TimerListAdd: add timer obj c07b959c! RTMP_TimerListAdd: add timer obj c07b9190! RTMP_TimerListAdd: add timer obj c07b956c! RTMP_TimerListAdd: add timer obj c07b98a8! RTMP_TimerListAdd: add timer obj c07b97e8! RTMP_TimerListAdd: add timer obj c07b9818! RTMP_TimerListAdd: add timer obj c07bc7ac! RTMP_TimerListAdd: add timer obj c07bc3a0! RTMP_TimerListAdd: add timer obj c07bc77c! RTMP_TimerListAdd: add timer obj c07bcab8! RTMP_TimerListAdd: add timer obj c07bc9f8! RTMP_TimerListAdd: add timer obj c07bca28! RTMP_TimerListAdd: add timer obj c07bf9bc! RTMP_TimerListAdd: add timer obj c07bf5b0! RTMP_TimerListAdd: add timer obj c07bf98c! RTMP_TimerListAdd: add timer obj c07bfcc8! RTMP_TimerListAdd: add timer obj c07bfc08! RTMP_TimerListAdd: add timer obj c07bfc38! RTMP_TimerListAdd: add timer obj c07d9c34! RTMP_TimerListAdd: add timer obj c07d9d50! RTMP_TimerListAdd: add timer obj c07d9c60! RTMP_TimerListAdd: add timer obj c07bffec! RTMP_TimerListAdd: add timer obj c078df8c! RTMP_TimerListAdd: add timer obj c079119c! RTMP_TimerListAdd: add timer obj c07943ac! RTMP_TimerListAdd: add timer obj c07975bc! RTMP_TimerListAdd: add timer obj c079a7cc! RTMP_TimerListAdd: add timer obj c079d9dc! RTMP_TimerListAdd: add timer obj c07a0bec! RTMP_TimerListAdd: add timer obj c07a3dfc! RTMP_TimerListAdd: add timer obj c07a700c! RTMP_TimerListAdd: add timer obj c07aa21c! RTMP_TimerListAdd: add timer obj c07ad42c! RTMP_TimerListAdd: add timer obj c07b063c! RTMP_TimerListAdd: add timer obj c07b384c! RTMP_TimerListAdd: add timer obj c07b6a5c! RTMP_TimerListAdd: add timer obj c07b9c6c! RTMP_TimerListAdd: add timer obj c07bce7c! RTMP_TimerListAdd: add timer obj c07bfd08! cfg_mode=14 cfg_mode=14 wmode_band_equal(): Band Not Equal! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) start ch = 36, ch->num = 1 0 0 0 0 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 22 22 22 22 22 22 22 22 22 22 start ch = 38, ch->num = 1 0 0 0 0 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 22 22 22 22 22 22 22 22 22 22 start ch = 40, ch->num = 1 0 0 0 0 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 22 22 22 22 22 22 22 22 22 22 start ch = 42, ch->num = 1 0 0 0 0 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 22 22 22 22 22 22 22 22 22 22 start ch = 44, ch->num = 1 0 0 0 0 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 22 22 22 22 22 22 22 22 22 22 start ch = 46, ch->num = 1 0 0 0 0 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 22 22 22 22 22 22 22 22 22 22 start ch = 48, ch->num = 1 0 0 0 0 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 22 22 22 22 22 22 22 22 22 22 start ch = 52, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 54, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 56, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 58, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 60, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 62, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 64, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 100, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 102, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 104, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 106, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 108, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 110, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 112, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 116, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 118, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 120, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 122, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 124, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 126, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 128, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 132, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 134, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 136, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 140, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 149, ch->num = 1 0 0 0 0 42 42 42 42 42 42 42 42 44 44 44 44 44 44 40 40 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 42 42 42 42 42 42 42 42 38 34 start ch = 151, ch->num = 1 0 0 0 0 44 44 44 44 44 44 44 44 44 44 44 44 44 44 40 40 44 44 44 44 44 44 44 44 46 46 46 46 46 44 44 44 44 44 44 44 44 44 44 44 42 42 42 42 42 42 42 42 38 34 start ch = 153, ch->num = 1 0 0 0 0 44 44 44 44 44 44 44 44 44 44 44 44 44 44 40 40 44 44 44 44 44 44 44 44 46 46 46 46 46 44 44 44 44 44 44 44 44 44 44 44 42 42 42 42 42 42 42 42 38 34 start ch = 155, ch->num = 1 0 0 0 0 44 44 44 44 44 44 44 44 44 44 44 44 44 44 40 40 44 44 44 44 44 44 44 44 46 46 46 46 46 44 44 44 44 44 44 44 44 44 44 44 42 42 42 42 42 42 42 42 38 34 start ch = 157, ch->num = 1 0 0 0 0 44 44 44 44 44 44 44 44 44 44 44 44 44 44 40 40 44 44 44 44 44 44 44 44 46 46 46 46 46 44 44 44 44 44 44 44 44 44 44 44 42 42 42 42 42 42 42 42 38 34 start ch = 159, ch->num = 1 0 0 0 0 44 44 44 44 44 44 44 44 44 44 44 44 44 44 40 40 44 44 44 44 44 44 44 44 46 46 46 46 46 44 44 44 44 44 44 44 44 44 44 44 42 42 42 42 42 42 42 42 38 34 start ch = 161, ch->num = 1 0 0 0 0 44 44 44 44 44 44 44 44 44 44 44 44 44 44 40 40 44 44 44 44 44 44 44 44 46 46 46 46 46 44 44 44 44 44 44 44 44 44 44 44 42 42 42 42 42 42 42 42 38 34 start ch = 165, ch->num = 1 0 0 0 0 44 44 44 44 44 44 44 44 44 44 44 44 44 44 40 40 44 44 44 44 44 44 44 44 46 46 46 46 46 44 44 44 44 44 44 44 44 44 44 44 42 42 42 42 42 42 42 42 38 34 start ch = 169, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 start ch = 173, ch->num = 1 0 0 0 0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1. Phy Mode = 49 2. Phy Mode = 49 ext_pa_current_setting = 0 0x11C = 0xc060f108 3. Phy Mode = 49 AntCfgInit: primary/secondary ant 0/1 ChipStructAssign(): RALINK6590 hook ! bAutoTxAgcG = 0 MCS Set = ff 00 00 00 01 RTMP_TimerListAdd: add timer obj c07c971c! MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=3, PrimCh=161, HT-CentCh=159, VHT-CentCh=155 MT76x0_ChipSwitchChannel: DefaultTargetPwr = 33 APStartUp(): AP Set CentralFreq at 155(Prim=161, HT-CentCh=159, VHT-CentCh=155, BBP_BW=2) Main bssid = e4:f4:c6:47:81:bc <==== rt28xx_init, Status=0 0x1300 = 00064300 RTMPDrvOpen(1):Check if PDMA is idle! RTMPDrvOpen(2):Check if PDMA is idle! evice wds1 entered promiscuous mode 2m[SYSTEM]/usr/bin/killall miniupnbr0: port 5(wds1) entering learning state pdbr0: port 5(wds1) entering learning state _wsc port 3(rai0) entering learning state killall: miniupnpdevice wds2 entered promiscuous mode d_wsc: no process killed_eeprom():1320] output:rai0 e2p: [br0: port 6(wds2) entering learning state SYbr0: port 6(wds2) entering learning state STEM]/sbin/chmod +x /var/rdevice wds3 entered promiscuous mode:7 alink_ap_start.sh:update_eeprom():1320] output:rai0 e2p: [SYSTbr0: port 7(wds3) entering learning state EMbr0: port 7(wds3) entering learning state ]/bin/sh -x /var/ralink_ap_start.sh327] org_value:21, new_value:21 + brctl addif br0 wds0UUID():121] + ifconfig wds0 up38833092-3092-1883-9130-e4f4c64781b8 + brctl addif br0 wds1UUIDdevice wds0 entered promiscuous mode + ifconfig wds1 up + brctl addif br0 wds29br0: port 4(wds0) entering learning state + ifconfig wds2 up) entering learning state + brctl addif br0 wds3dd timer obj c00e9b54! + ifconfig wds3 up1b8 + iwpriv ra0 set WscConfMode=0 + iwpriv rai0 set WscConfMode=0 + iwpriv ra0 set WscSetupLock=0 + iwpriv rai0 set WscSetupLock=0 + route add -host 239.255.255.250 dev br0 + iwpriv ra0 set WscConfMode=7 + iwpriv rai0 set WscConfMode=7 + miniupnpd_wsc -m 1 -I ra0 -P /var/run/miniupnpd.ra0 -i eth2.2 -a 192.168.1.12 -n 7777 -u 38833092-3092-1883-9130-e4f4c64781b8 Unknown option: -I Unknown option: ra0 Jan 1 00:00:21 miniupnpd[259]: [truncated] m Jan 1 00:00:21 miniupnpd[259]: [truncated] m [SYSTEM]/bin/cp /proc/uptime /tmp/wlan_uptime Jan 1 00:00:21 miniupnpd[259]: Failed to open sockets for sending SSDP notify messages. EXITING [SYSTEM]/bin/led_app on 42 [SYSTEM]/usr/sbin/led_app on 45 unlink running file </var/run/rc.wlan.run> =============rc start [rc debug]/usr/sbin/rc lan start ap_name=lan action=start [rc.c::rc_action():779] rc_action before add lan - start rc action <lan @ start> before file_lock. rc action <lan @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.lan.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add lan - start [rc.c::rc_start():682] Calling Start function of lan [SYSTEM]/usr/sbin/brctl setfd br0 1 [SYSTEM]/sbin/ifconfig br0 192.168.1.12 netmask 255.255.255.0 broadcast 192.168.1.255 [SYSTEM]/usr/sbin/brctl stp br0 on sh: cannot switch register base addr to 0xb0000000 create /proc/http_file/getLanIp: nonexistent directory [Swrite offset 0x60, value 0xb89d YSTEM]echo "Set MDIO to normal mode" Set MDIO to normal mode r0: port 7(wds3) entering learning state 32br0: port 6(wds2) entering learning state m[br0: port 5(wds1) entering learning state SYbr0: port 4(wds0) entering learning state STbr0: port 3(rai0) entering learning state EMbr0: port 2(ra0) entering learning state ]rbr0: port 1(eth2.1) entering learning state eg s 0xb0000000 [SYSTEM]reg w 0x60 0xb89d [SYSTEM]/usbr0: port 7(wds3) entering listening state r/br0: port 7(wds3) entering listening state sbbr0: port 6(wds2) entering listening state inbr0: port 6(wds2) entering listening state /ibr0: port 5(wds1) entering listening state fcbr0: port 5(wds1) entering listening state onbr0: port 4(wds0) entering listening state fibr0: port 4(wds0) entering listening state g br0: port 3(rai0) entering listening state brbr0: port 3(rai0) entering listening state 0 br0: port 2(ra0) entering listening state dobr0: port 2(ra0) entering listening state wnbr0: port 1(eth2.1) entering listening state r0: port 1(eth2.1) entering listening state 0m [SYSTEM]/usr/sbin/ifconfig br0 up [SYSTEM]/usr/sbin/rc dhcpd restart [rc debug]/usr/sbin/rc dhcpd restart ap_name=dhcpd action=restart [rc.c::rc_action():779] rc_action before add dhcpd - restart rc action <dhcpd @ restart> before file_lock. rc action <dhcpd @ restart lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.dhcpd.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add dhcpd - restart [rc.c::rc_stop():721] Calling Stop function of dhcpd killall: udhcpd: no process killed [rc.c::rc_start():682] Calling Start function of dhcpd killall: udhcpd: no process killed unlink running file </var/run/rc.dhcpd.run> [SYSTEM]/usr/sbin/rc dnrd restart [rc debug]/usr/sbin/rc dnrd restart ap_name=dnrd action=restart [rc.c::rc_action():779] rc_action before add dnrd - restart rc action <dnrd @ restart> before file_lock. rc action <dnrd @ restart lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.dnrd.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add dnrd - restart [rc.c::rc_stop():721] Calling Stop function of dnrd [SYSTEM]iptables -t nat -D PREROUTING -i br0 -p tcp --dport 80 -j DNAT --to 192.168.1.12:80 iptables: No chain/target/match by that name. [SYSTEM]iptables -t nat -D PREROUTING -i br0 -p udp --dport 53 -m dnshj -j DNAT --to 192.168.1.12 iptables: No chain/target/match by that name. [SYSTEM]iptables -t nat -D PREROUTING -i br0 -p udp --dport 53 -j DNAT --to 192.168.1.12 iptables: No chain/target/match by that name. [SYSTEM]killall -9 dnrd killall: dnrd: no process killed [rc.c::rc_start():682] Calling Start function of dnrd unlink running file </var/run/rc.dnrd.run> unlink running file </var/run/rc.lan.run> [rc debug]/usr/sbin/rc printk start ap_name=printk action=start [rc.c::rc_action():779] rc_action before add printk - start rc action <printk @ start> before file_lock. rc action <printk @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.printk.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add printk - start [rc.c::rc_start():682] Calling Start function of printk [SYSTEM]/bin/echo 1 4 1 7 > /proc/sys/kernel/printk [flash.c::sc_check_remotescfgmgrmagic():633] buf:ff, ff, ff, ff [flash.c::sc_check_remotescfgmgrmagic():635] magic:31, 3e, c5, 8d scfgmgr for local unlink running file </var/run/rc.printk.run> [rc debug]/usr/sbin/rc timezone start ap_name=timezone action=start [rc.c::rc_action():779] rc_action before add timezone - start rc action <timezone @ start> before file_lock. rc action <timezone @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.timezone.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add timezone - start [rc.c::rc_start():682] Calling Start function of timezone [SYSTEM]/bin/echo GMT+8 > /etc/TZ unlink running file </var/run/rc.timezone.run> [rc debug]/usr/sbin/rc syslogd start ap_name=syslogd action=start [rc.c::rc_action():779] rc_action before add syslogd - start rc action <syslogd @ start> before file_lock. rc action <syslogd @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.syslogd.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add syslogd - start [rc.c::rc_start():682] Calling Start function of syslogd unlink running file </var/run/rc.syslogd.run> [rc debug]/usr/sbin/rc httpd start ap_name=httpd action=start [rc.c::rc_action():779] rc_action before add httpd - start rc action <httpd @ start> before file_lock. rc action <httpd @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.httpd.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add httpd - start [rc.c::rc_start():682] Calling Start function of httpd [sc_language.c::create_language_file():425] Create link files for <English> [sc_language.c::update_language_mtd_mapping():324] update mtd /dev/mtdblock4 to ENU [sc_language.c::update_language_mtd_mapping():324] update mtd /dev/mtdblock5 to ESP [sc_language.c::update_language_mtd_mapping():324] update mtd /dev/mtdblock6 to CHS [sc_language.c::update_language_mtd_mapping():324] update mtd /dev/mtdblock7 to FRA [sc_language.c::update_language_mtd_mapping():324] update mtd /dev/mtdblock8 to DEU [sc_language.c::create_language_file():448] Checking MTD </dev/mtdblock4> according to its id <ENU> [sc_language.c::decompress_language():175] Try to decompress MTD </dev/mtdblock4> [SYSTEM]/bin/cat /www.eng/block.htm | /bin/sed "s|@model_name#|R6050|g" > /etc/block.htm rmmod: ipt_REJECT: No such file or directory [rc debug]/bin/rc firewall restart ap_name=firewall action=restart [rc.c::rc_action():779] rc_action before add firewall - restart rc action <firewall @ restart> before file_lock. rc action <firewall @ restart lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.firewall.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add firewall - restart unlink running file </var/run/rc.firewall.run> [rc.c::rc_action():779] rc_action before add firewall - restart rc action <firewall @ restart> before file_lock. rc action <firewall @ restart lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.firewall.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add firewall - restart [rc.c::rc_stop():721] Calling Stop function of firewall [SYSTEM]echo 0 > /proc/sys/net/ipv4/ip_forward [SYSTEM]echo 1 > /proc/sys/net/ipv4/conf/br0/forwarding [SYSTEM]echo 1 > /proc/sys/net/ipv4/conf/wlan0/forwarding sh: cannot create /proc/sys/net/ipv4/conf/wlan0/forwarding: nonexistent directory [SYSTEM]echo 1 > /proc/sys/net/ipv4/conf/wlan0-va0/forwarding sh: cannot create /proc/sys/net/ipv4/conf/wlan0-va0/forwarding: nonexistent directory [rc.c::rc_start():682] Calling Start function of firewall [fw_rule] /usr/sbin/iptables -t nat -F [fw_rule] /usr/sbin/iptables -t nat -X [fw_rule] /usr/sbin/iptables -t filter -F [fw_rule] /usr/sbin/iptables -t filter -X [fw_rule] /usr/sbin/iptables -t mangle -F [fw_rule] /usr/sbin/iptables -t nat -N PRE_BASIC [fw_rule] /usr/sbin/iptables -t nat -N DNS [fw_rule] /usr/sbin/iptables -t nat -N PRE_PROXY [fw_rule] /usr/sbin/iptables -t nat -N MINIUPNPD [fw_rule] /usr/sbin/iptables -t nat -N PT [fw_rule] /usr/sbin/iptables -t nat -N NAPT [fw_rule] /usr/sbin/iptables -t nat -N VS [fw_rule] /usr/sbin/iptables -t nat -N DMZ [fw_rule] /usr/sbin/iptables -t nat -N VPN [fw_rule] /usr/sbin/iptables -t nat -N PORT_FORWARD [fw_rule] /usr/sbin/iptables -t filter -N DOS [fw_rule] /usr/sbin/iptables -t filter -N SP_DOS_2 [fw_rule] /usr/sbin/iptables -t filter -N SCAN [fw_rule] /usr/sbin/iptables -t filter -N PROXY [fw_rule] /usr/sbin/iptables -t filter -N LOCAL_SERVICE [fw_rule] /usr/sbin/iptables -t filter -N OUT_FILTER [fw_rule] /usr/sbin/iptables -t filter -N HTTP [fw_rule] /usr/sbin/iptables -t filter -N BLOCK_HTTP [fw_rule] /usr/sbin/iptables -t filter -N IN_FILTER [fw_rule] /usr/sbin/iptables -t filter -N MINIUPNPD [fw_rule] /usr/sbin/iptables -t filter -N FW_BASIC [fw_rule] /usr/sbin/iptables -t filter -N SMB [fw_rule] /usr/sbin/iptables -t filter -N PORT_FORWARD [fw_rule] /usr/sbin/iptables -t filter -N FTP_SHARES [fw_rule] /usr/sbin/iptables -t filter -N HTTPS_SHARES [fw_rule] /usr/sbin/iptables -t filter -N PT [fw_rule] /usr/sbin/iptables -t filter -N C_NATMGR [fw_rule] /usr/sbin/iptables -t nat -A PREROUTING -j PRE_BASIC [fw_rule] /usr/sbin/iptables -t nat -A PREROUTING -j PRE_PROXY [fw_rule] /usr/sbin/iptables -t nat -A PREROUTING -j PT [fw_rule] /usr/sbin/iptables -t nat -A PREROUTING -j NAPT [fw_rule] /usr/sbin/iptables -t nat -A PREROUTING -j VS [fw_rule] /usr/sbin/iptables -t nat -A PREROUTING -j PORT_FORWARD [fw_rule] /usr/sbin/iptables -t nat -A PREROUTING -j DMZ [fw_rule] /usr/sbin/iptables -P INPUT DROP [fw_rule] /usr/sbin/iptables -A INPUT -i lo -j ACCEPT [fw_rule] /usr/sbin/iptables -A INPUT -i ipsec0 -j ACCEPT [fw_rule] /usr/sbin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT [fw_rule] /usr/sbin/iptables -A INPUT -p tcp --syn -j DOS [fw_rule] /usr/sbin/iptables -A INPUT -p udp -j DOS [fw_rule] /usr/sbin/iptables -A INPUT -p icmp --icmp-type echo-request -j DOS [fw_rule] /usr/sbin/iptables -A INPUT -j SP_DOS_2 [fw_rule] /usr/sbin/iptables -A INPUT -j PROXY [fw_rule] /usr/sbin/iptables -A INPUT -j LOCAL_SERVICE [fw_rule] /usr/sbin/iptables -P FORWARD DROP [fw_rule] /usr/sbin/iptables -A FORWARD -j OUT_FILTER [fw_rule] /usr/sbin/iptables -A FORWARD -p tcp -j HTTP [fw_rule] /usr/sbin/iptables -A FORWARD -j FW_BASIC [fw_rule] /usr/sbin/iptables -A FORWARD -j SP_DOS_2 [fw_rule] /usr/sbin/iptables -A FORWARD -j PORT_FORWARD [fw_rule] /usr/sbin/iptables -A FORWARD -p tcp --syn -j DOS [fw_rule] /usr/sbin/iptables -A FORWARD -p udp -j DOS [fw_rule] /usr/sbin/iptables -A FORWARD -p icmp --icmp-type echo-request -j DOS [fw_rule] /usr/sbin/iptables -A FORWARD -i eth2.2 -j IN_FILTER [fw_rule] /usr/sbin/iptables -A FW_BASIC -i lo -j ACCEPT [fw_rule] /usr/sbin/iptables -A FW_BASIC -i ipsec0 -j ACCEPT [fw_rule] /usr/sbin/iptables -A FW_BASIC -j C_NATMGR [fw_rule] /usr/sbin/iptables -A FW_BASIC -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu [fw_rule] /usr/sbin/iptables -A FW_BASIC -m state --state ESTABLISHED,RELATED -j ACCEPT [fw_rule] /usr/sbin/iptables -A FW_BASIC -i br0 -p tcp ! --syn -m state --state NEW -j DROP [fw_rule] /usr/sbin/iptables -A FW_BASIC -m mark --mark 0x2511 -j ACCEPT [fw_rule] /usr/sbin/iptables -A FW_BASIC -m mark --mark 0x2512 -j ACCEPT [fw_rule] /usr/sbin/iptables -A LOCAL_SERVICE -m mark --mark 0x2511 -j ACCEPT [fw_rule] /usr/sbin/iptables -t nat -A POSTROUTING -j VPN [fw_rule] /usr/sbin/iptables -t nat -A PREROUTING -i eth2.2 -j MINIUPNPD [fw_rule] /usr/sbin/iptables -A FORWARD -i eth2.2 -j MINIUPNPD [fw_rule] /usr/sbin/iptables -I INPUT -i br0 -j ACCEPT [fw_rule] /usr/sbin/iptables -A FW_BASIC -i br0 -j PT [fw_rule] /usr/sbin/iptables -A FW_BASIC -i br0 -j ACCEPT [fw_rule] /usr/sbin/iptables -t mangle -A OUTPUT -j MARK --set-mark 0x9527 [SYSTEM]/usr/sbin/rc syslogd create;/usr/bin/killall -SIGUSR2 syslogd & [rc debug]/usr/sbin/rc syslogd create ap_name=syslogd action=create [rc.c::rc_action():779] rc_action before add syslogd - create rc action <syslogd @ create> before file_lock. rc action <syslogd @ create lock = 4> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.syslogd.run rc action < unlock = 4> after file_lock. [rc.c::rc_action():787] rc_action after add syslogd - create [rc.c::rc_create():763] Calling Create function of syslogd unlink running file </var/run/rc.syslogd.run> [SYSTEM]/bin/echo switch=on > /proc/net/spi_enable killall: syslogd: no process killed [SYSTEM]/bin/echo clear > /proc/net/firewall_block [SYSTEM]/bin/echo clear > /proc/net/clamp_total_session_for_one_src [SYSTEM]/bin/echo clear > /proc/net/psd_udp_tcp_vanilla_port_scan [SYSTEM]/bin/echo clear > /proc/net/echo_chargen_config [SYSTEM]/bin/echo wan_if=eth2.2 > /proc/net/spi_enable [SYSTEM]/bin/echo spi=enable > /proc/net/spi_enable [fw_rule] /usr/sbin/iptables -A DOS -j RETURN [fw_rule] /usr/sbin/iptables -I FORWARD -i br0 -p icmp --icmp-type port-unreachable -j DROP [fw_rule] /usr/sbin/iptables -A SP_DOS_2 ! -i eth2.2 -m ct_dir ! --ct_dir from_wan -j RETURN [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -m limit --limit 3/m --limit-burst 1 -p tcp --tcp-flags ALL FIN,URG,PSH -j DLOG --log-level 19 --log-prefix "Xmas Tree Scan" [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -m limit --limit 3/m --limit-burst 1 -p tcp --tcp-flags ALL FIN -j DLOG --log-level 19 --log-prefix "FIN Scan" [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -p tcp --tcp-flags ALL FIN -j DROP [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -m limit --limit 3/m --limit-burst 1 -p tcp --tcp-flags ALL NONE -j DLOG --log-level 19 --log-prefix "NULL Scan" [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -p tcp --tcp-flags ALL NONE -j DROP [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -m limit --limit 3/m --limit-burst 1 -p tcp --tcp-flags ALL RST -j DLOG --log-level 19 --log-prefix "RST Scan" [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -p tcp --tcp-flags ALL RST -j DROP [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -m limit --limit 3/m --limit-burst 1 -p tcp --tcp-flags ALL SYN,RST -j DLOG --log-level 19 --log-prefix "SYN/RST Scan" [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -p tcp --tcp-flags ALL SYN,RST -j DROP [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -m limit --limit 3/m --limit-burst 1 -p tcp --tcp-flags SYN,FIN SYN,FIN -j DLOG --log-level 19 --log-prefix "IMAP Scan" [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -p tcp --tcp-flags URG URG -j DLOG --log-level 19 --log-prefix "WinNuke Attack" [fw_rule] /usr/sbin/iptables -A SP_DOS_2 -p tcp --tcp-flags URG URG -j DROP Segmentation fault [SYSTEM]/usr/sbin/mini_httpd -d /www -r "NETGEAR R6050" -c '**.cgi' -t 300& unlink running file </var/run/rc.httpd.run> [rc debug]/usr/sbin/rc remote_httpd start ap_name=remote_httpd action=start [rc.c::rc_action():779] rc_action before add remote_httpd - start rc action <remote_httpd @ start> before file_lock. rc action <remote_httpd @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.remote_httpd.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add remote_httpd - start [rc.c::rc_start():682] Calling Start function of remote_httpd unlink running file </var/run/rc.remote_httpd.run> [rc debug]/usr/sbin/rc dhcpd start ap_name=dhcpd action=start [rc.c::rc_action():779] rc_action before add dhcpd - start rc action <dhcpd @ start> before file_lock. rc action <dhcpd @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.dhcpd.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add dhcpd - start [rc.c::rc_start():682] Calling Start function of dhcpd killall: udhcpd: no process killed unlink running file </var/run/rc.dhcpd.run> [rc debug]/usr/sbin/rc ntp start ap_name=ntp action=start [rc.c::rc_action():779] rc_action before add ntp - start rc action <ntp @ start> before file_lock. rc action <ntp @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.ntp.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add ntp - start [rc.c::rc_start():682] Calling Start function of ntp [SYSTEM]/usr/sbin/netgear_ntp -z GMT+8& unlink running file </var/run/rc.ntp.run> [rc debug]/usr/sbin/rc route start ap_name=route action=start [rc.c::rc_action():779] rc_action before add route - start rc action <route @ start> before file_lock. rc action <route @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.route.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add route - start [rc.c::rc_start():682] Calling Start function of route unlink running file </var/run/rc.route.run> [rc debug]/usr/sbin/rc ripd start ap_name=ripd action=start [rc.c::rc_action():779] rc_action before add ripd - start rc action <ripd @ start> before file_lock. rc action <ripd @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.ripd.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add ripd - start [rc.c::rc_start():682] Calling Start function of ripd unlink running file </var/run/rc.ripd.run> [rc debug]/usr/sbin/rc dnrd start ap_name=dnrd action=start [rc.c::rc_action():779] rc_action before add dnrd - start rc action <dnrd @ start> before file_lock. rc action <dnrd @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.dnrd.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add dnrd - start [rc.c::rc_start():682] Calling Start function of dnrd unlink running file </var/run/rc.dnrd.run> [rc debug]/usr/sbin/rc potcounter start ap_name=potcounter action=start [rc.c::rc_action():779] rc_action before add potcounter - start rc action <potcounter @ start> before file_lock. rc action <potcounter @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.potcounter.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add potcounter - start [rc.c::rc_start():682] Calling Start function of potcounter unlink running file </var/run/rc.potcounter.run> [rc debug]/usr/sbin/rc lltd start ap_name=lltd action=start [rc.c::rc_action():779] rc_action before add lltd - start rc action <lltd @ start> before file_lock. rc action <lltd @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.lltd.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add lltd - start [rc.c::rc_start():682] Calling Start function of lltd unlink running file </var/run/rc.lltd.run> [rc debug]/usr/sbin/rc usb_init start ap_name=usb_init action=start [rc.c::rc_action():779] rc_action before add usb_init - start rc action <usb_init @ start> before file_lock. rc action <usb_init @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.usb_init.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add usb_init - start [rc.c::rc_start():682] Calling Start function of usb_init [SYSTEM]/bin/rm /etc/samba/secrets.tdb rm: cannot remove '/etc/samba/secrets.tdb': No such file or directory [SYSTEM]/usr/bin/killall -9 smbd >/dev/null 2>&1 [SYSTEM]/usr/bin/killall -9 nmbd >/dev/null 2>&1 [SYSTEM]/usr/bin/killall -9 bftpd >/dev/null 2>&1 [SYSTEM]/usr/bin/killall avahi-daemon killall: avahi-daemon: no process killed [SYSTEM]/usr/bin/killall afpd killall: afpd: no process killed [SYSTEM]/usr/bin/killall cnid_metad killall: cnid_metad: no process killed [SYSTEM]/usr/bin/killall -SIGINT wget_gd >/dev/null 2>&1 [SYSTEM]/usr/bin/killall -SIGINT trcli >/dev/null 2>&1 [SYSTEM]/usr/bin/killall -SIGTREM download_manage >/dev/null 2>&1 [SYSTEM]/usr/bin/rm -rf /var/run/down/* >/dev/null 2>&1 [SYSTEM]/bin/rm -rf /var/tmp/*.status & [SYSTEM]/usr/bin/killall -9 bftpd >/dev/null 2>&1 unlink running file </var/run/rc.usb_init.run> [rc debug][rc debug]/usr/sbin/rc debug_mode start ap_name=debug_mode action=start [rc.c::rc_action():779] rc_action before add debug_mode - start rc action <debug_mode @ start> before file_lock. rc action <debug_mode @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.debug_mode.run /usr/sbin/rc down_manage start ap_name=down_manage action=start [rc.c::rc_action():779] rc_action before add down_manage - start rc action <down_manage @ start> before file_lock. rc action <down_manage @ start lock = 5> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.down_manage.run rc action < unlock = 5> after file_lock. [rc.c::rc_action():787] rc_action after add down_manage - start unlink running file </var/run/rc.down_manage.run> [rc.c::rc_action():779] rc_action before add down_manage - start rc action <down_manage @ start> before file_lock. rc action <down_manage @ start lock = 5> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.down_manage.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add debug_mode - start [rc.c::rc_start():682] Calling Start function of debug_mode unlink running file </var/run/rc.debug_mode.run> [rc debug]/usr/sbin/rc wifi_isolation start ap_name=wifi_isolation action=start [rc.c::rc_action():779] rc_action before add wifi_isolation - start rc action <wifi_isolation @ start> before file_lock. rc action <wifi_isolation @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.wifi_isolation.run rc action < unlock = 5> after file_lock. [rc.c::rc_action():787] rc_action after add down_manage - start [rc.c::rc_start():682] Calling Start function of down_manage unlink running file </var/run/rc.down_manage.run> rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add wifi_isolation - start [rc.c::rc_start():682] Calling Start function of wifi_isolation [SYSTEM]/bin/echo "lan_ip=192.168.1.12" > /proc/wifi_isolation sh: cannot create /proc/wifi_isolation: nonexistent directory [SYSTEM]/bin/echo "lan_netmask=255.255.255.0" > /proc/wifi_isolation sh: cannot create /proc/wifi_isolation: nonexistent directory unlink running file </var/run/rc.wifi_isolation.run> [rc debug]/usr/sbin/rc mediaserver start ap_name=mediaserver action=start [rc.c::rc_action():779] rc_action before add mediaserver - start rc action <mediaserver @ start> before file_lock. rc action <mediaserver @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.mediaserver.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add mediaserver - start [rc.c::rc_start():682] Calling Start function of mediaserver #### media server is disable unlink running file </var/run/rc.mediaserver.run> [rc debug]/usr/sbin/rc bridge_iptv_port start ap_name=bridge_iptv_port action=start [rc.c::rc_action():779] rc_action before add bridge_iptv_port - start rc action <bridge_iptv_port @ start> before file_lock. rc action <bridge_iptv_port @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.bridge_iptv_port.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add bridge_iptv_port - start [rc.c::rc_start():682] Calling Start function of bridge_iptv_port unlink running file </var/run/rc.bridge_iptv_port.run> =============rc finish PID USER VSZ STAT COMMAND 1 root 1604 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 4 root 0 SW [kworker/0:0] 5 root 0 SW [kworker/u:0] 6 root 0 SW< [khelper] 7 root 0 SW [sync_supers] 8 root 0 SW [bdi-default] 9 root 0 SW< [kblockd] 10 root 0 SW [khubd] 11 root 0 SW [kswapd0] 12 root 0 SW [fsnotify_mark] 13 root 0 SW< [crypto] 17 root 0 SW [mtdblock0] 18 root 0 SW [mtdblock1] 19 root 0 SW [mtdblock2] 20 root 0 SW [mtdblock3] 21 root 0 SW [mtdblock4] 22 root 0 SW [mtdblock5] 23 root 0 SW [mtdblock6] 24 root 0 SW [mtdblock7] 25 root 0 SW [mtdblock8] 26 root 0 SW [mtdblock9] 27 root 0 SW [mtdblock10] 28 root 0 SW [mtdblock11] 29 root 0 SW [mtdblock12] 30 root 0 SW [mtdblock13] 31 root 0 SW [mtdblock14] 32 root 0 SW [mtdblock15] 33 root 0 SW [mtdblock16] 34 root 0 SW [mtdblock17] 35 root 0 SW [mtdblock18] 36 root 0 SW [mtdblock19] 37 root 0 SW [mtdblock20] 38 root 0 SW [mtdblock21] 39 root 0 SW [kworker/u:1] 46 root 0 SW [kworker/0:1] 48 root 1604 S /bin/sh /usr/etc/rcS 119 root 1140 S /sbin/klogd 121 root 836 S /usr/sbin/cmd_agent_ap 123 root 836 S /usr/sbin/cmd_agent_ap_3g 201 root 0 SW [RtmpCmdQTask] 202 root 0 SW [RtmpWscTask] 203 root 0 SW [flush-31:15] 216 root 0 SW [RtmpCmdQTask] 217 root 0 SW [RtmpWscTask] 577 root 1692 S /usr/sbin/scfgmgr 733 root 1984 S /usr/sbin/mini_httpd -d /www -r NETGEAR R6050 -c **.c 739 root 848 S /usr/sbin/netgear_ntp -z GMT+8 760 root 1244 S /usr/bin/lld2 br0 815 root 1604 R /bin/ps [rc debug]/usr/sbin/rc upnp start ap_name=upnp action=start [rc.c::rc_action():779] rc_action before add upnp - start rc action <upnp @ start> before file_lock. rc action <upnp @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.upnp.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add upnp - start unlink running file </var/run/rc.upnp.run> [rc.c::rc_action():779] rc_action before add upnp - start rc action <upnp @ start> before file_lock. rc action <upnp @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.upnp.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add upnp - start unlink running file </var/run/rc.upnp.run> can't find this application [rc.c::rc_action():779] rc_action before add upnp - start rc action <upnp @ start> before file_lock. rc action <upnp @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.upnp.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add upnp - start [rc.c::rc_start():682] Calling Start function of upnp unlink running file </var/run/rc.upnp.run> /usr/etc/rcS: line 254: cannot create /proc/sys/net/ipv4/conf/wlan0/forwarding: nonexistent directory /usr/etc/rcS: line 255: cannot create /proc/sys/net/ipv4/conf/wlan0-va0/forwarding: nonexistent directory /usr/etc/rcS: line 259: cannot create /proc/sys/net/ipv4/conf/eth1/rp_filter: nonexistent directory [rc debug]/usr/sbin/rc reset_lan start ap_name=reset_lan action=start [rc.c::rc_action():779] rc_action before add reset_lan - start rc action <reset_lan @ start> before file_lock. rc action <reset_lan @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.reset_lan.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add reset_lan - start unlink running file </var/run/rc.reset_lan.run> [rc.c::rc_action():779] rc_action before add reset_lan - start rc action <reset_lan @ start> before file_lock. rc action <reset_lan @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.reset_lan.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add reset_lan - start unlink running file </var/run/rc.reset_lan.run> can't find this application [rc.c::rc_action():779] rc_action before add reset_lan - start rc action <reset_lan @ start> before file_lock. rc action <reset_lan @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.reset_lan.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add reset_lan - start [rc.c::rc_start():682] Calling Start function of reset_lan unlink running file </var/run/rc.reset_lan.run> preapre_sys_for_3g mknod: /dev/zero: File exists mknod: /dev/ttyUSB0: File exists mknod: /dev/ttyUSB1: File exists mknod: /dev/ttyUSB2: File exists mknod: /dev/ttyUSB3: File exists mkdir: cannot create directory '/var': File exists preapre_sys_for_3g done [rc debug]rc choose_wan start ap_name=choose_wan action=start [rc.c::rc_action():779] rc_action before add choose_wan - start rc action <choose_wan @ start> before file_lock. rc action <choose_wan @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.choose_wan.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add choose_wan - start unlink running file </var/run/rc.choose_wan.run> [rc.c::rc_action():779] rc_action before add choose_wan - start rc action <choose_wan @ start> before file_lock. rc action <choose_wan @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.choose_wan.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add choose_wan - start unlink running file </var/run/rc.choose_wan.run> can't find this application [rc.c::rc_action():779] rc_action before add choose_wan - start rc action <choose_wan @ start> before file_lock. rc action <choose_wan @ start lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.choose_wan.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add choose_wan - start [rc.c::rc_start():682] Calling Start function of choose_wan [basic/choose_wan.c::choose_wan_start():53] ***************CHOOSE WAN...*********** [basic/choose_wan.c::choose_wan_start():57] not PR RU, no 3g function [SYSTEM]/usr/sbin/rc wan start [rc debug]/usr/sbin/rc wan start [SYSTEM]/usr/sbin/brctl addif br0 eth2.2 unlink running file </var/run/rc.choose_wan.run> cable_down_once [rc debug]/usr/sbin/rc down_manage stop ap_name=down_manage action=stop [rc.c::rc_action():779] rc_action before add down_manage - stop rc action <down_manage @ stop> before file_lock. rc action <down_manage @ stop lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.down_manage.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add down_manage - stop unlink running file </var/run/rc.down_manage.run> [rc.c::rc_action():779] rc_action before add down_manage - stop rc action <down_manage @ stop> before file_lock. rc action <down_manage @ stop lock = 3> after file_lock. [SYSTEM]/bin/cp /proc/uptime /var/run/rc.down_manage.run rc action < unlock = 3> after file_lock. [rc.c::rc_action():787] rc_action after add down_manage - stop [rc.c::rc_stop():721] Calling Stop function of down_manage [SYSTEM]/usr/bin/killall -SIGINT wget_gd >/dev/null 2>&1 killall: udhcpc: no process killed [SYSTEM]/usr/bin/killall -SIGINT trcli >/dev/null 2>&1 [SYSTEM]/usr/bin/killall -SIGTREM download_manage >/dev/null 2>&1 PID USER VSZ STAT COMMAND 1 root 1604 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 4 root 0 SW [kworker/0:0] 5 root 0 SW [kworker/u:0] 6 root 0 SW< [khelper] 7 root 0 SW [sync_supers] 8 root 0 SW [bdi-default] 9 root 0 SW< [kblockd] 10 root 0 SW [khubd] 11 root 0 SW [kswapd0] 12 root 0 SW [fsnotify_mark] 13 root 0 SW< [crypto] 17 root 0 SW [mtdblock0] 18 root 0 SW [mtdblock1] 19 root 0 SW [mtdblock2] 20 root 0 SW [mtdblock3] 21 root 0 SW [mtdblock4] 22 root 0 SW [mtdblock5] 23 root 0 SW [mtdblock6] 24 root 0 SW [mtdblock7] 25 root 0 SW [mtdblock8] 26 root 0 SW [mtdblock9] 27 root 0 SW [mtdblock10] 28 root 0 SW [mtdblock11] 29 root 0 SW [mtdblock12] 30 root 0 SW [mtdblock13] 31 root 0 SW [mtdblock14] 32 root 0 SW [mtdblock15] 33 root 0 SW [mtdblock16] 34 root 0 SW [mtdblock17] 35 root 0 SW [mtdblock18] 36 root 0 SW [mtdblock19] 37 root 0 SW [mtdblock20] 38 root 0 SW [mtdblock21] 39 root 0 SW [kworker/u:1] 46 root 0 SW [kworker/0:1] 48 root 1604 S /bin/sh /usr/etc/rcS 119 root 1140 S /sbin/klogd 121 root 836 S /usr/sbin/cmd_agent_ap 123 root 836 S /usr/sbin/cmd_agent_ap_3g 201 root 0 SW [RtmpCmdQTask] 202 root 0 SW [RtmpWscTask] 203 root 0 SW [flush-31:15] 216 root 0 SW [RtmpCmdQTask] 217 root 0 SW [RtmpWscTask] 577 root 1692 S /usr/sbin/scfgmgr 733 root 1984 S /usr/sbin/mini_httpd -d /www -r NETGEAR R6050 -c **.c 739 root 848 S /usr/sbin/netgear_ntp -z GMT+8 760 root 1244 S /usr/bin/lld2 br0 824 root 856 S /usr/sbin/crond 825 root 1968 S /usr/sbin/multi_pb_app 90 91 92 10 50 867 root 844 S /usr/sbin/cmd_agent 1050 root 1396 S usr/sbin/wan_monitor 1057 root 3716 S /usr/sbin/rc down_manage stop 1082 root 0 SW [ telnetDBGD ] 1083 root 0 SW [ acktelnetDBGD ] 1084 root 0 SW [checkSBusTimeou] 1086 root 0 SW [NU UDP] 1087 root 0 SW [NU TCP] 1088 root 1604 R /bin/ps /usr/etc/rcS: line 311: /usr/sbin/led_test: not found starting pid 1091, tty '/dev/ttyS1': '/bin/sh' # [SYSTEM]/usr/bin/rm -rf /var/run/down/* >/dev/null 2>&1 unlink running file </var/run/rc.down_manage.run> INFO14A7: Bind to br0 RTMP_TimerListAdd: add timer obj c00e9b90!

cat /proc/version

# cat /proc/version
Linux version 2.6.36 (root@ubuntu) (gcc version 3.4.2) #224 Wed Oct 8 09:35:40 CST 2014

cat /proc/cpuinfo

# cat /proc/cpuinfo
system type             : Ralink SoC
processor               : 0
cpu model               : MIPS 24Kc V5.0
BogoMIPS                : 386.04
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : yes, count: 4, address/irw mask: [0x0004, 0x0ffc, 0x0ff8, 0x0ffb]
ASEs implemented        : mips16 dsp
shadow register sets    : 1
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

cat /proc/cmdline

# cat /proc/cmdline
console=ttyS1,57600n8 root=/dev/mtdblock3 console=ttyS0

cat /proc/meminfo

# cat /proc/meminfo
MemTotal:         124088 kB
MemFree:           98576 kB
Buffers:            2080 kB
Cached:             7540 kB
SwapCached:            0 kB
Active:             3260 kB
Inactive:           7252 kB
Active(anon):        892 kB
Inactive(anon):        0 kB
Active(file):       2368 kB
Inactive(file):     7252 kB
Unevictable:           0 kB
Mlocked:               0 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:           916 kB
Mapped:              668 kB
Shmem:                 0 kB
Slab:               9320 kB
SReclaimable:       1012 kB
SUnreclaim:         8308 kB
KernelStack:         488 kB
PageTables:          184 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:       62044 kB
Committed_AS:       3172 kB
VmallocTotal:    1048372 kB
VmallocUsed:        6296 kB
VmallocChunk:    1038376 kB

cat /proc/bus/pci/devices

# cat devices
0000    18140802        ff                     0                20200000                       0                       0                       0                   0                       0                       0                   10000                       0                       0                   0                       0                       0
0100    14c37650        d               20000000                       0                       0                       0                       0                   0                       0                  100000                       0                       0                       0                   0                       0                       0        rtpci
0101    14c38650        d               20100000                       0                       0                       0                       0                   0                       0                  100000                       0                       0                       0                   0                       0                       0

cat /proc/mtd

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "Bootloader"
mtd1: 00100000 00020000 "SC PID"
mtd2: 00400000 00020000 "Kernel"
mtd3: 01c00000 00020000 "Rootfs"
mtd4: 00200000 00020000 "English UI"
mtd5: 00200000 00020000 "Chinese UI"
mtd6: 00200000 00020000 "Russian UI"
mtd7: 00200000 00020000 "Portuguese UI"
mtd8: 00200000 00020000 "German UI"
mtd9: 00200000 00020000 "Other UI"
mtd10: 00100000 00020000 "WiFi Data"
mtd11: 00100000 00020000 "SC Private Data"
mtd12: 00200000 00020000 "POT"
mtd13: 00200000 00020000 "Traffic Meter"
mtd14: 00200000 00020000 "DPF"
mtd15: 00200000 00020000 "SC Nvram"
mtd16: 00200000 00020000 "Ralink Nvram"
mtd17: 00200000 00020000 "Ralink Reserved"
mtd18: 00200000 00020000 "Reserved Block1"
mtd19: 00200000 00020000 "Reserved Block2"
mtd20: 00200000 00020000 "Reserved Block3"
mtd21: 03c00000 00020000 "Reserved Block4"

lsmod

# lsmod
Module                  Size  Used by
NetUSB                176416  0
GPL_NetUSB              2400  1 NetUSB
usbserial_filter        1856  0
usb_storage            36736  0
ipt_REJECT            204560  0
MT7610_ap            1273472  1
others_dos              1136  0
clamp_total_session_for_one_src   137696  0
tcp_syn_dos            23424  0
psd_and_special_udp_dos   898160  0
fake_source_dos         1792  0
firewall_block         10368  0
common                  1376  2 psd_and_special_udp_dos,fake_source_dos
natlimit                4384  0
hairpin                 1456  0
cudp                     800  0
cdmz                    1664  0
calg                    3088  0
cpm                     6320  0
cpt                     7232  0
cnapt                   1648  0
cnapt_core             16624  7 hairpin,cudp,cdmz,calg,cpm,cpt,cnapt
xt_ct_dir                544  0
ipt_macblock_dnshj      2144  0
ipt_DLOG                1088  0
ipt_dnshj               1248  0
ipt_http_string         6256  0
ipt_condition           1584  0
led_hw                  1792  0
led_pb_api              6192  1 led_hw

ps aux

# ps aux
  PID USER       VSZ STAT COMMAND
    1 root      1604 S    init
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    4 root         0 SW   [kworker/0:0]
    6 root         0 SW<  [khelper]
    7 root         0 SW   [sync_supers]
    8 root         0 SW   [bdi-default]
    9 root         0 SW<  [kblockd]
   10 root         0 SW   [khubd]
   11 root         0 SW   [kswapd0]
   12 root         0 SW   [fsnotify_mark]
   13 root         0 SW<  [crypto]
   17 root         0 SW   [mtdblock0]
   18 root         0 SW   [mtdblock1]
   19 root         0 SW   [mtdblock2]
   20 root         0 SW   [mtdblock3]
   21 root         0 SW   [mtdblock4]
   22 root         0 SW   [mtdblock5]
   23 root         0 SW   [mtdblock6]
   24 root         0 SW   [mtdblock7]
   25 root         0 SW   [mtdblock8]
   26 root         0 SW   [mtdblock9]
   27 root         0 SW   [mtdblock10]
   28 root         0 SW   [mtdblock11]
   29 root         0 SW   [mtdblock12]
   30 root         0 SW   [mtdblock13]
   31 root         0 SW   [mtdblock14]
   32 root         0 SW   [mtdblock15]
   33 root         0 SW   [mtdblock16]
   34 root         0 SW   [mtdblock17]
   35 root         0 SW   [mtdblock18]
   36 root         0 SW   [mtdblock19]
   37 root         0 SW   [mtdblock20]
   38 root         0 SW   [mtdblock21]
   39 root         0 SW   [kworker/u:1]
   46 root         0 SW   [kworker/0:1]
  119 root      1140 S    /sbin/klogd
  121 root       836 S    /usr/sbin/cmd_agent_ap
  123 root       836 S    /usr/sbin/cmd_agent_ap_3g
  201 root         0 SW   [RtmpCmdQTask]
  202 root         0 SW   [RtmpWscTask]
  216 root         0 SW   [RtmpCmdQTask]
  217 root         0 SW   [RtmpWscTask]
  577 root      1692 S    /usr/sbin/scfgmgr
  733 root      1984 S    /usr/sbin/mini_httpd -d /www -r NETGEAR R6050 -c **.c
  760 root      1244 S    /usr/bin/lld2 br0
  824 root       856 S    /usr/sbin/crond
  825 root      1968 S    /usr/sbin/multi_pb_app 90 91 92 10 50
  865 root       844 S    /usr/sbin/cmd_agent
 1050 root      1396 S    usr/sbin/wan_monitor
 1082 root         0 SW   [ telnetDBGD ]
 1083 root         0 SW   [ acktelnetDBGD ]
 1084 root         0 SW   [checkSBusTimeou]
 1086 root         0 SW   [NU UDP]
 1087 root         0 SW   [NU TCP]
 1091 root      1612 S    /bin/sh
 2915 root      1600 S    telnetd
 9577 root         0 SW   [scsi_eh_0]
 9578 root         0 SW   [usb-storage]
 9586 root         0 SW   [kworker/u:2]
25697 root      1604 R    ps aux