Netgear R6300 v2
| abgn+ac (AC1750) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| R6300 Smart WiFi Router | |||||||||||||
|
| |||||||||||||
| Support | Support page | ||||||||||||
| Downloads | Download page | ||||||||||||
| Wikipedia | Netgear | ||||||||||||
| WikiDevi.wi-cat.ru | Netgear R6300 v2 | ||||||||||||
| 3rd Party Firmware | |||||||||||||
| dd-wrt | Status Unknown | ||||||||||||
| OpenWrt | Partial Support | ||||||||||||
| Tomato any flavor | Status Unknown | ||||||||||||
| Gargoyle | Status Unknown | ||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev | Netgear R6300 v2 | ||||||||||||
| FCC ID | PY313200227 | ||||||||||||
| IC ID | 4054A-13200227 | ||||||||||||
| Board ID | U12H240T00 | ||||||||||||
| Type | wireless router | ||||||||||||
| CPU1 | Broadcom BCM4708A0 | ||||||||||||
| CPU1 Type | ARMv7-A Cortex-A9 | ||||||||||||
| CPU1 Speed | 800 MHz ( 2 cores ) | ||||||||||||
| Flash1 Chip | Samsung K9F1G08U0D-SCB0 | ||||||||||||
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||||||||||
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> | ||||||||||||
| RAM1 Chip | Samsung K4B1G1646G-BCH9 | ||||||||||||
| ETH chip1 | Broadcom BCM4708A0 | ||||||||||||
| Switch | Broadcom BCM4708A0 | ||||||||||||
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||||||||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||||||||||
| Stock bootloader | CFE | ||||||||||||
| Stock FW OS | Linux 2.6.22 | ||||||||||||
| Expansion IF types | USB 2.0, USB 3.0 | ||||||||||||
| USB ports | 2 | ||||||||||||
| USB Hub Compatible | Untested | ||||||||||||
| Power | 12 VDC, 2.5 A | ||||||||||||
| Connector type | barrel | ||||||||||||
|
Flags: | |||||||||||||
|
Additional chips | |||||||||||||
| Other | |||||||||||||
|
Default IP address: 192.168.1.1 | |||||||||||||
| Manuf/OEM/ODM | Foxconn U12H240 T00 | ||||||||||||
| 3rd Party Firmware Support |
DD-WRT • (List) , Tomato (Shibby) • (List | DLs) , FreshTomato • (List | DLs) | ||||||||||||
| Retail | |||||||||||||
| Availability | End of Life | ||||||||||||
| FCC approval date | 26 March 2013 | ||||||||||||
| (Est.) release date | 28 June 2013 | ||||||||||||
| ASINs |
B00EM5UFP4 B00EM5UFP4 | ||||||||||||
| Country of manuf | China, Vietnam | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 | Broadcom BCM4331 | ||||||||||||
| Wireless interface OUI | 44:94:FC | ||||||||||||
| Antenna Connector Type | U.FL | ||||||||||||
| MIMO status | 3x3:3 | ||||||||||||
| Wireless Standard | IEEE 802.11b/g/n | ||||||||||||
| 802.11n | up to 450 Mbps | ||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||
| Radio cor_rev | 29 | ||||||||||||
| Radio 2 | |||||||||||||
| Chip1 | Broadcom BCM4360 | ||||||||||||
| Wireless interface OUI | 44:94:FC | ||||||||||||
| Antenna Connector Type | U.FL | ||||||||||||
| MIMO status | 3x3:3 | ||||||||||||
| Wireless Standard | IEEE 802.11a/n/ac | ||||||||||||
| 802.11ac | up to 1300 Mbps | ||||||||||||
| 802.11n | up to 450 Mbps | ||||||||||||
| 802.11a | up to 54 Mbps | ||||||||||||
| WiFi Operating Frequency | 5 GHz | ||||||||||||
| Radio cor_rev | 40 | ||||||||||||
| |||||||||||||
| |||||||||||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Netgear devices with specifications, see Netgear.
Overview
- Wi-Fi Certified : WFA19988 (as of 07/02/2013)
- OEM: Foxconn (Ambit) U12H240T00
Specifications
The FCC photos for this device show space for a single RAM chip..
- which is a Samsung K4B1G1646G (128MB) in those photos.
The FCC docs also show the device labeled as the Netgear AC1450.
- This device is presumably using a BCM4708 series SoC.
The R6300v2 has a single USB 3.0 port and a single USB 2.0 port.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a9
Support started version: 15.05
Current supported version: 24.10.4
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
J252 (RX) (TX) (GND) (3.3V) pin4 pin3 pin2 pin1
Boot log
| Boot log • >> |
|---|
Decompressing...done
SHMOO VER 1.13
PKID07DC06011801080000000000001A103F01000000
S300402DF
00002430
RDLYW0 00000004
RDENW0 00000050
RDQSW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
01 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
02 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
03 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
04 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
05 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
06 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
07 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
08 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
09 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
10 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
11 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
12 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
13 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
14 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
15 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
PW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
01 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
02 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
03 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
04 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
05 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
06 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
07 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
08 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
09 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
10 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
11 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
12 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
13 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
14 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
15 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
NW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
01 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
02 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
03 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
04 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
05 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
06 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
07 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
08 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
09 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
10 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
11 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
12 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
13 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
14 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
15 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
WRDQW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
01 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
02 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
03 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
04 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
05 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
06 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
07 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
08 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
09 ---++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-
10 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
11 --++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++-
12 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
13 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
14 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
15 --++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++-
WRDMW0 00000031
WRDMW0 00000031
ADDR
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 +++++++++++++++++++++++++++++++X++++S+++++++++++++++++++++++++++
Decompressing...done
CFE for Foxconn Router R6300v2 version: v1.0.15
Build Date: Fri May 24 13:47:09 CST 2013
Init Arena
Init Devs.
Boot up from NAND flash...
Boot partition size = 262144(0x40000)
DDR Clock: 533 MHz
Info: DDR frequency set from clkfreq=800,*533*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.2002 (r382208)
CPU type 0x0: 800MHz
Tot mem: 262144 KBytes
Device eth0: hwaddr 44-94-FC-43-59-89, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: .... 4623680 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: found no supported devices
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x380000
nflash: squash filesystem with lzma found at block 42
Creating 16 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000200000 : "nvram"
0x000000200000-0x000000220000 : "board_data"
0x000000220000-0x000000240000 : "POT1"
0x000000240000-0x000000260000 : "POT2"
0x000000260000-0x000000280000 : "T_Meter1"
0x000000280000-0x0000002a0000 : "T_Meter2"
0x0000002a0000-0x0000002c0000 : "ML1"
0x0000002c0000-0x0000002e0000 : "ML2"
0x0000002e0000-0x000000300000 : "ML3"
0x000000300000-0x000000320000 : "ML4"
0x000000320000-0x000000340000 : "ML5"
0x000000340000-0x000000360000 : "ML6"
0x000000360000-0x000000380000 : "ML7"
0x000000380000-0x000002180000 : "linux"
0x0000005472b4-0x000002180000 : "rootfs"
PPP generic driver version 2.4.2
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0a.1: EHCI Host Controller
ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0a.1: irq 111, io mem 0x18021000
ehci_hcd 0000:00:0a.1: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0a.0: OHCI Host Controller
ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0a.0: irq 111, io mem 0x18022000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:0b.0: xHCI Host Controller
xhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:0b.0: irq 112, io mem 0x18023000
xhci_hcd 0000:00:0b.0: Failed to enable MSI-X
xhci_hcd 0000:00:0b.0: failed to allocate MSI entry
usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
u32 classifier
Actions configured
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Spare area=64 eccbytes 56, ecc bytes located at:
2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35
36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Available 7 bytes at (off,len):
(1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0)
Scanning device for bad blocks
Bad eraseblock 331 at 0x000002960000
Bad eraseblock 471 at 0x000003ae0000
Bad eraseblock 513 at 0x000004020000
Bad eraseblock 912 at 0x000007200000
Options: NO_AUTOINCR,NO_PADDING,CACHEPRG,COPYBACK,NO_READRDY,BBT_SCAN2NDPAGE,
Creating 1 MTD partitions on "brcmnand":
0x000002180000-0x000008000000 : "brcmnand"
VFS: Mounted root (squashfs filesystem) readonly on device 31:15.
devtmpfs: mounted
Freeing init memory: 188K
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
Reading board data...
WSC UUID: 0xba2c07957847b4e73671e0b8339d3956
NTP synchronized date/time: 00-00-00
MAC address of 1st STA connected: 00-00-00-00-00-00
wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
invalid RF magic!
No RF parameters! Use default.
### main:1205 Set Normal Power!
Initialise conn table 2048 entries
Commit new ethernet config...
Doing nvram commit by pid 1 !
insmod: usbcore.ko: no module by that name found
insmod: ehci-hcd.ko: no module by that name found
insmod: wl_high.ko: no module by that name found
eth3: cmd=14: No such device
wl1 not up in 3 sec
Hit enter to continue...WARNING: console log level set to 1
killall: upnp: no process killed
upnp: No such file or directory
killall: wps_monitor: no process killed
killall: wps_ap: no process killed
killall: wps_enr: no process killed
### wps_wfi_init(): <wl0_wfi_enable=(null)><wl1_wfi_enable=(null)>WFI is not enabled ###
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1001
Reading board data...
WSC UUID: 0xba2c07957847b4e73671e0b8339d3956
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
info, udhcp server (v0.9.8) started
error, unable to parse 'option wins '
error, unable to parse 'option domain '
mevent start...
opened loopback socket 3
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
POT integrity check OK.
shm ID: 0
Get a correct Segment_ID: 0 and semaphore ID:32769
Can't find handler for ASP command: wlg_cgi_get_isolation_status(0);
Can't find handler for ASP command: wlg_cgi_get_isolation_status(1);
Can't find handler for ASP command: eco_get_redirect_link();
Can't find handler for ASP command: devices_cgi_get_acl_device_table("DEV_control");
Can't find handler for ASP command: devices_cgi_get_acl_white_table();
Can't find handler for ASP command: devices_cgi_get_acl_black_table();
Can't find handler for ASP command: devices_cgi_get_show_access_ctrl_settings();
Can't find handler for ASP command: devices_cgi_get_acl_device_table("DEV_device", "wired");
Can't find handler for ASP command: devices_cgi_get_acl_device_table("DEV_device", "wireless");
open /tmp/2g_chek_stat fail
open /tmp/5g_chek_stat fail
acsd: scan in progress ...
Can't find handler for ASP command: wlg_cgi_get_isolation_status();
acsd: scan in progress ...
Can't find handler for ASP command: usb_cgi_get_register_state();
Can't find handler for ASP command: usb_cgi_get_invite_state();
Can't find handler for ASP command: cdl_cgi_set_hijack(0);
Can't find handler for ASP command: cdl_cgi_set_hijack(1);
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1001
Info: No FWPT default policies.
agnat QOS disable!
insmod: usbcore.ko: no module by that name found
rmmod: l7_filter: No such file or directory
insmod: ehci-hcd.ko: no module by that name found
insmod: ohci-hcd.ko: no module by that name found
insmod: usb-storage.ko: no module by that name found
mount: mounting none on /proc/bus/usb failed: Device or resource busy
IOCTL_AG_REGION_SET: English
Start DHCP client daemon
info, udhcp client (v0.9.8) started
eth0: No such process
add active user:192.168.1.2
httpd: ipv6 socket bound in 80.
httpd: socket bound in 0.0.0.0:443.
minidlan :scan files
route: ioctl 0x890c failed: No such process
killall: dhcp6c: no process killed
killall: IPv6-relay: no process killed
killall: pppdv6: no process killed
killall: rtsol: no process killed
killall: dhcp6s: no process killed
killall: radvd: no process killed
route: ioctl 0x890c failed: No such process
killall: dhcp6s: no process killed
killall: radvd: no process killed
Hit enter to continue...
|
/proc/mtd
| /proc/mtd • >> |
|---|
cat /proc/mtd dev: size erasesize name mtd0: 00080000 00020000 "boot" mtd1: 00180000 00020000 "nvram" mtd2: 00020000 00020000 "board_data" mtd3: 00020000 00020000 "POT1" mtd4: 00020000 00020000 "POT2" mtd5: 00020000 00020000 "T_Meter1" mtd6: 00020000 00020000 "T_Meter2" mtd7: 00020000 00020000 "ML1" mtd8: 00020000 00020000 "ML2" mtd9: 00020000 00020000 "ML3" mtd10: 00020000 00020000 "ML4" mtd11: 00020000 00020000 "ML5" mtd12: 00020000 00020000 "ML6" mtd13: 00020000 00020000 "ML7" mtd14: 01e00000 00020000 "linux" mtd15: 01c38d4c 00020000 "rootfs" mtd16: 05e80000 00020000 "brcmnand" |
mount
| mount • >> |
|---|
# mount rootfs on / type rootfs (rw) /dev/root on / type squashfs (ro,relatime) devtmpfs on /dev type devtmpfs (rw,relatime,size=127580k,nr_inodes=31022,mode=755) devfs on /dev type tmpfs (rw,relatime) proc on /proc type proc (rw,relatime) sysfs on /sys type sysfs (rw,relatime) ramfs on /tmp type ramfs (rw,relatime) devpts on /dev/pts type devpts (rw,relatime,mode=600) usbdeffs on /proc/bus/usb type usbfs (rw,relatime) |
ps
| ps • >> |
|---|
# ps PID Uid VSZ Stat Command 1 0 1384 S /sbin/preinit 2 0 SW [kthreadd] 3 0 SW [ksoftirqd/0] 4 0 SW [kworker/0:0] 5 0 SW [kworker/u:0] 6 0 SW< [khelper] 7 0 SW [kworker/u:1] 62 0 SW [sync_supers] 64 0 SW [bdi-default] 65 0 SW< [kblockd] 74 0 SW [khubd] 126 0 SW [kswapd0] 172 0 SW [fsnotify_mark] 195 0 SW< [crypto] 779 0 SW [mtdblock0] 784 0 SW [mtdblock1] 789 0 SW [mtdblock2] 794 0 SW [mtdblock3] 799 0 SW [mtdblock4] 804 0 SW [mtdblock5] 809 0 SW [mtdblock6] 814 0 SW [mtdblock7] 819 0 SW [mtdblock8] 824 0 SW [mtdblock9] 829 0 SW [mtdblock10] 834 0 SW [mtdblock11] 839 0 SW [mtdblock12] 844 0 SW [mtdblock13] 849 0 SW [mtdblock14] 854 0 SW [mtdblock15] 871 0 SW [kworker/0:1] 894 0 SW [mtdblock16] 2506 0 1020 S /bin/eapd 2508 0 1360 S nas 2512 0 1648 S /bin/wps_monitor 2528 0 1112 S /usr/sbin/acsd 2570 0 1020 S swresetd 2572 0 1068 S dnsRedirectReplyd 2574 0 1136 S dlnad 2580 0 688 S dnsmasq -h -n -c 0 -N -i br0 -r /tmp/resolv.conf -u r 2581 0 712 S udhcpd /tmp/udhcpd.conf 2583 0 1240 S mevent 2585 0 1068 S ddnsd & 2587 0 1072 S telnetenabled 2589 0 1240 S heartbeat 2593 0 1000 S wlanconfigd 2595 0 1064 S pot run 2599 0 1072 S scheact 2601 0 1552 S upnpd 2604 0 1216 S /usr/sbin/email 2608 0 1244 S /usr/sbin/acl_logd 2610 0 1132 S lld2d br0 2613 0 6192 S httpd -S -E /usr/sbin/ca.pem /usr/sbin/httpsd.pem 2616 0 1212 S check_fw 2680 0 SW [ telnetDBGD ] 2681 0 SW [ acktelnetDBGD ] 2682 0 SW [checkSBusTimeou] 2686 0 SW [NU UDP] 2687 0 SW [NU TCP] 2698 0 688 S udhcpc -i eth0 -p /var/run/udhcpc0.pid -s /tmp/udhcpc 2716 0 10000 S minidlna.exe -a 192.168.1.1/24 -f /tmp/minidlna.conf 2717 0 10000 S minidlna.exe -a 192.168.1.1/24 -f /tmp/minidlna.conf 2721 0 Z N [minidlna.exe] 2722 0 10000 S minidlna.exe -a 192.168.1.1/24 -f /tmp/minidlna.conf 2752 0 1060 S wpsd 2753 0 1308 S /bin/sh 2758 0 1300 R ps |
See also
- Netgear R6100 - AC1200
- Netgear R6220 - AC1200
- Netgear R6250 - AC1600
- Netgear R6300 v1 - AC1750
- Netgear R6300 v2 - AC1750
- Netgear R6400 v1 - AC1750
- Netgear R6400 v2 - AC1750
- Netgear R6700v1 - AC1750
- Netgear R6700v2 - AC1750
- Netgear R6700v3 - AC1750
- Netgear R6800 - AC1900
- Netgear R6900v1 - AC1900
- Netgear R6900v2 - AC1900
- Netgear R6900P - AC1900
- Netgear R7000 - AC1900
- Netgear R7000P - AC2300
- Netgear R7450 - AC2600
- Netgear
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4708A0
- Broadcom
- Embedded System ARMv7-A
- Embedded System Cortex-A9
- Manuf Foxconn
- DD-WRT Supported
- Tomato Supported
- Embedded System BCM4331
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System BCM4360
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- Wi-Fi Certified
- English Documentation