Netgear R8500
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC5300) | |||||
---|---|---|---|---|---|
Nighthawk X8 - AC5300 Tri-Band WiFi Router | |||||
![]() | |||||
Homepage | |||||
Support | |||||
Wikipedia | |||||
3rd Party Firmware | |||||
dd-wrt |
Status Unknown | ||||
OpenWrt |
Status Unknown | ||||
Tomato any flavor |
Status Unknown | ||||
Platform | |||||
Brand • Model • Rev |
Netgear R8500 100NAS | ||||
FCC ID | |||||
IC ID | |||||
Board ID |
U12H334T99 | ||||
Type |
wireless router | ||||
Series |
Nighthawk X8 | ||||
CPU1 ![]() |
Broadcom BCM4709C0 | ||||
CPU1 Type |
ARM Cortex A9 | ||||
CPU1 Speed |
1.4 GHz ( 2 cores ) | ||||
Flash1 Chip |
Spansion S34ML01G200TFI00 | ||||
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> | ||||
RAM1 Chip |
Samsung K4B4G1646E-BYK0 | ||||
ETH chip1 |
Broadcom BCM4709C0 | ||||
Switch |
Broadcom BCM53125S | ||||
Ethernet Port Count |
1-1GbE-WAN 6-1GbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||
802dot11 OUI: none specified | |||||
Stock bootloader |
CFE | ||||
Stock FW OS |
Linux | ||||
Expansion IF types |
USB 3.0, USB 2.0 | ||||
USB ports |
2 | ||||
USB Hub Compatible |
Untested | ||||
Power |
19 VDC, 3.16 A | ||||
Connector type |
barrel | ||||
Serial Port (UART) |
yes, 4-pin header, J4 | ||||
Flags: MU-MIMO, DFS, LACP, Link Aggregation | |||||
Additional chips | |||||
Other | |||||
Default SSID: NETGEARXX (37 addl. devices) | |||||
Manuf/OEM/ODM |
Foxconn U12H334 T99 | ||||
Retail | |||||
FCC approval date | 26 May 2015 | ||||
(Est.) release date | 01 October 2015 | ||||
(Est.) initial retail price (in USD): | $300 | ||||
Newegg | N82E16833122814 | ||||
ASIN |
B015PD3HOC ![]() | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 |
Broadcom BCM4366 | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
U.FL | ||||
MIMO status |
4x4:4 | ||||
Wireless Standard |
IEEE 802.11a/n/ac | ||||
802.11ac |
up to 2165 Mbps | ||||
N-QAM |
up to 1000 Mbps | ||||
802.11n |
up to 450 Mbps | ||||
802.11a |
up to 54 Mbps | ||||
WiFi Operating Frequency |
5 GHz | ||||
Radio cor_rev |
40 | ||||
Radio 2 | |||||
Chip1 |
Broadcom BCM4366 | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
U.FL | ||||
MIMO status |
4x4:4 | ||||
Wireless Standard |
IEEE 802.11a/n/ac | ||||
802.11ac |
up to 2165 Mbps | ||||
N-QAM |
up to 1000 Mbps | ||||
802.11n |
up to 450 Mbps | ||||
802.11a |
up to 54 Mbps | ||||
WiFi Operating Frequency |
5 GHz | ||||
Radio cor_rev |
40 | ||||
Radio 3 | |||||
Chip1 |
Broadcom BCM4366 | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
U.FL | ||||
MIMO status |
4x4:4 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
N-QAM |
up to 1000 Mbps | ||||
802.11n |
up to 450 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Netgear device with specifications, see Netgear.
Overview
See also: Netgear R8300 and Foxconn
Product features
- Get fastest speeds available up to 5.3 Gbps
- Tri-band Wi-Fi delivers more Wi-Fi to more devices
- Quad Stream delivers up to four data streams per Wi-Fi band
- 4 active and 4 internal antennas to amplify and maximize range
- 6 Gigabit Ethernet ports, aggregate two for fast file transfers
- Smart Connect intelligently selects Wi-Fi band for every device
- MU-MIMO for simultaneous streaming of data to multiple devices
- Dynamic QoS prioritizes bandwidth by application and device
Specifications
- CPU: Broadcom BCM47094 @1.4 GHz (DualCore ARM Cortex A9)
- Memory: 128 MB Flash (NAND) and 512 MB RAM (DDR3)
- WLAN: 2x 4T4R AC BCM4366 + 1x 4T4R N BCM4366
- DualBand, acqam, 5 GHz (2x 2165Mbps), 2.4 GHz (1000Mbps)
- Seven (7x GbE) 10/100/1000 Mbps ports: 1x WAN & 6x LAN
- LACP: Dual Gigabit Ethernet Port Aggregation (LAN1 + LAN2)
- Two (2x USB) USB ports: 1x USB 3.0 & 1x USB 2.0 port
- Dimension:: 316 mm x 264 mm x 61 mm (WxHxD)
- Weight: 1680 g
Links of Interest
Reviews
Forum threads
News
Pictures
Notes
GPL Info
GPL info >> • |
---|
/*formal version control*/ #define AMBIT_HARDWARE_VERSION "U12H334T00" #define AMBIT_SOFTWARE_VERSION "V1.0.0.56" #define AMBIT_UI_VERSION "1.0.28" #define STRING_TBL_VERSION "1.0.0.56_2.1.46.1" #define AMBIT_PRODUCT_NAME "R7800" #define AMBIT_PRODUCT_ALIAS "Nighthawk X8" #define AMBIT_PRODUCT_DESCRIPTION "802.11ac Dual Band Gigabit Wireless Router R7800" #define UPnP_MODEL_URL "http://www.netgear.com/Products/R7800.aspx" #if defined(DUAL_TRI_BAND_HW_SUPPORT) #define AMBIT_PRODUCT_NAME_TRI_BAND "R8500" #define AMBIT_PRODUCT_DESCRIPTION_TRI_BAND "802.11ac Dual Band Gigabit Wireless Router R8500" #define UPnP_MODEL_URL_TRI_BAND "http://www.netgear.com/Products/R8500.aspx" #endif #define UPnP_MODEL_DESCRIPTION "802.11ac" /**************************************************************************** * Board-specific defintions * ****************************************************************************/ /* Interface definitions */ #define WAN_IF_NAME_NUM "eth0" #define LAN_IF_NAME_NUM "vlan1" #define WLAN_IF_NAME_NUM "eth1" #define WLAN_N_IF_NAME_NUM "eth2" #if defined(R8000) #define WLAN_5G_2_IF_NAME_NUM "eth3" #endif #define WDS_IF_NAME_NUM "wds0.1" /* WDS interface */ /* Foxconn add start by aspen Bai, 11/13/2008 */ #ifdef MULTIPLE_SSID #define WLAN_BSS1_NAME_NUM "wl0.1" /* Multiple BSSID #2 */ #define WLAN_BSS2_NAME_NUM "wl0.2" /* Multiple BSSID #3 */ #define WLAN_BSS3_NAME_NUM "wl0.3" /* Multiple BSSID #4 */ /* Foxconn add start, Tony W.Y. Wang, 03/22/2010 @For 5G*/ #define WLAN_5G_BSS1_NAME_NUM "wl1.1" /* Multiple BSSID #2 */ #define WLAN_5G_BSS2_NAME_NUM "wl1.2" /* Multiple BSSID #3 */ #define WLAN_5G_BSS3_NAME_NUM "wl1.3" /* Multiple BSSID #4 */ /* Foxconn add end, Tony W.Y. Wang, 03/22/2010 @For 5G*/ #define WLAN_5G_2_BSS1_NAME_NUM "wl2.1" /* Multiple BSSID #2 */ #define WLAN_5G_2_BSS2_NAME_NUM "wl2.2" /* Multiple BSSID #3 */ #define WLAN_5G_2_BSS3_NAME_NUM "wl2.3" /* Multiple BSSID #4 */ #endif /* MULTIPLE_SSID */ /* Foxconn add end by aspen Bai, 11/13/2008 */ /* GPIO definitions */ /* Foxconn modified start, Wins, 04/11/2011 */ #define GPIO_POWER_LED_GREEN 2 #define GPIO_POWER_LED_GREEN_STR "2" #define GPIO_POWER_LED_AMBER 3 #define GPIO_POWER_LED_AMBER_STR "3" #define GPIO_LOGO_LED_1 1 #define GPIO_LOGO_LED_1_STR "1" #define GPIO_LOGO_LED_2 9 #define GPIO_LOGO_LED_2_STR "9" #define GPIO_WAN_LED 8 #define GPIO_WAN_LED_2 9 #define GPIO_WIFI_2G_LED 13 #define GPIO_WIFI_5G_LED 12 #define GPIO_WIFI_5G_2_LED -1 /*only for 8500*/ #define GPIO_WIFI_SUMMARY_LED 20 #define GPIO_WIFI_LNA_LED 15 #define GPIO_LED_SWITCH 5 #define GPIO_LED_BTN_LED 1 #define WPS_LED_GPIO 14 #if (defined INCLUDE_USB_LED) #define GPIO_LED_USB 18 #define GPIO_USB_LED 18 /* USB1 LED. */ #define GPIO_USB1_LED 18 /* USB3.0 LED. */ #define GPIO_USB2_LED 17 /* USB2.0 LED. */ #endif /*INCLUDE_USB_LED*/ #define GPIO_USB1_ON_OFF 0 #define GPIO_USB2_ON_OFF 16 #define enable_usb_ports() { \ system("gpio 0 1"); \ system("gpio 16 1"); \ } #define disable_usb_ports() { \ system("gpio 0 0"); \ system("gpio 16 0"); \ } /*Buttons definitions, original in ~/swresetd/swresetd_config.h */ #define GPIO_RESET_BUTTON 10 /* Input */ #define GPIO_WPS_BUTTON 4 #define GPIO_WIFI_BUTTON 19 #define GPIO_LED_BUTTON 5 //#define SINGLE_FIRMWARE #ifdef SINGLE_FIRMWARE #define GPIO_POWER_LED_GREEN_8500 2 #define GPIO_POWER_LED_GREEN_STR_8500 "2" #define GPIO_POWER_LED_AMBER_8500 3 #define GPIO_POWER_LED_AMBER_STR_8500 "3" #define GPIO_LOGO_LED_1_8500 1 #define GPIO_LOGO_LED_1_STR_8500 "1" #define GPIO_LOGO_LED_2_8500 9 #define GPIO_LOGO_LED_2_STR_8500 "9" #define GPIO_WAN_LED_8500 8 #define GPIO_WAN_LED_2_8500 9 #define GPIO_WIFI_2G_LED_8500 13 #define GPIO_WIFI_5G_LED_8500 11 #define GPIO_WIFI_5G_2_LED_8500 12 #define GPIO_WIFI_SUMMARY_LED_8500 20 #define GPIO_WIFI_LNA_LED_8500 15 #define GPIO_LED_SWITCH_8500 5 #define GPIO_LED_BTN_LED_8500 1 #define WPS_LED_GPIO_8500 14 #if (defined INCLUDE_USB_LED) #define GPIO_LED_USB_8500 18 #define GPIO_USB_LED_8500 18 /* USB1 LED. */ #define GPIO_USB1_LED_8500 18 /* USB2.0 LED. */ #define GPIO_USB2_LED_8500 17 /* USB3.0 LED. */ #endif /*INCLUDE_USB_LED*/ /*Buttons definitions, original in ~/swresetd/swresetd_config.h */ #define GPIO_RESET_BUTTON_8500 10 /* Input */ #define GPIO_WPS_BUTTON_8500 4 #define GPIO_WIFI_BUTTON_8500 19 #define GPIO_LED_BUTTON_8500 5 #if defined(DUAL_TRI_BAND_HW_SUPPORT) #define DUAL_BAND_HW_VER "R7800" /* Foxconn add start, Snoopy.wu, 04/07/2015 */ #define DUAL_BAND_NTGR_SPECIFIC_HW_ID "" #define DUAL_BAND_NTGR_GENERIC_HW_ID "" /* Foxconn add end, Snoopy.wu, 04/07/2015 */ #define TRI_BAND_HW_VER "R8500" /* Foxconn add start, Snoopy.wu, 04/07/2015 */ #define TRI_BAND_NTGR_SPECIFIC_HW_ID "VEN_01f2&DEV_0021&REV_01" #define TRI_BAND_NTGR_GENERIC_HW_ID "VEN_01f2&DEV_8000&SUBSYS_01&REV_01 VEN_01f2&DEV_8000&REV_01" /* Foxconn add end, Snoopy.wu, 04/07/2015 */ /* Foxconn add start, Snoopy.wu, 05/15/2015 */ #define Reboot_Waiting_Time "3300" /* Foxconn add end, Snoopy.wu, 05/15/2015 */ #define FLASH_SIZE (96*1024*1024) #define MAX_SIZE_FILE 96*1024*1024 #define MAX_SIZE_KERNEL (MAX_SIZE_FILE) #define MAX_SIZE_ROOTFS (MAX_SIZE_FILE) #define MAX_SIZE_FILE_OPENSOURCE MAX_SIZE_FILE #define MAX_SIZE_KERNEL_OPENSOURCE MAX_SIZE_FILE #define MAX_SIZE_ROOTFS_OPENSOURCE MAX_SIZE_FILE #define BOARD_ID_OPENSOURCE "U12H334T99_OPENSOURCE" #define OPENSOURCE_START_MTD_IDX (1) #define OPENSOURCE_END_MTD_IDX (1) #define IMAGE_BLOCK_SIZE 0x20000 #define MAX_IMAGE_SIZE MAX_SIZE_FILE #endif /*_AMBITCFG_H*/ |
See also
Categories:
- Netgear
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4709C0
- Broadcom
- Embedded System ARM
- Embedded System Cortex A9
- Embedded System BCM53125S
- Manuf Foxconn
- Embedded System BCM4366
- Has Mimo Status
- Embedded System IEEE 802.11a/n/ac
- Embedded System IEEE 802.11b/g/n
- Triple-Radio Wireless Embedded System
- Wireless Embedded System
- Tri-Band
- Embedded System
- English Documentation