Netgear WAX610Y
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax (AX1800) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AX1800 Dual Band WiFi 6 Access Point | |||||||||||||
|
| |||||||||||||
| Homepage | Product page | ||||||||||||
| Wikipedia | Netgear | ||||||||||||
| 3rd Party Firmware | |||||||||||||
| dd-wrt | Status Unknown | ||||||||||||
| OpenWrt | Supported | ||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||
| Gargoyle | Status Unknown | ||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev | Netgear WAX610Y | ||||||||||||
| FCC ID (fcc.io) | PY320200498 | ||||||||||||
| FCC ID (fcc.report) | PY320200498 | ||||||||||||
| Type | access point | ||||||||||||
| CPU1 | Qualcomm IPQ6010 | ||||||||||||
| CPU1 Type | ARM Cortex-A53 | ||||||||||||
| CPU1 Speed | 1.2 GHz ( 4 cores ) | ||||||||||||
| Flash1 Chip | Winbond W29N01HZBINF | ||||||||||||
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) | ||||||||||||
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> | ||||||||||||
| RAM1 Chip | Winbond W634GU6NB-11 | ||||||||||||
| ETH chip1 | Qualcomm IPQ6010 | ||||||||||||
| ETH chip2 | Qualcomm Atheros QCA8081 | ||||||||||||
| Ethernet Port Count | 1-2.5GbE-LAN | ||||||||||||
| Wired Standard | IEEE 802.3i/3u/3ab/3bz | ||||||||||||
| Stock bootloader | U-Boot 2016.01-V9.0.0.23 | ||||||||||||
| Expansion IF types | none specified | ||||||||||||
| PoE | 802.3at, standard | ||||||||||||
| Power | 12 VDC, 2.5 A | ||||||||||||
| Connector type | barrel | ||||||||||||
| Serial Port (UART) | yes, 4-pin header, (115200 8N1) | ||||||||||||
|
Flags: | |||||||||||||
|
Additional chips | |||||||||||||
| Other | |||||||||||||
|
Default IP address: 192.168.1.1 | |||||||||||||
| Manuf/OEM/ODM | Senao | ||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||
| Retail | |||||||||||||
| FCC approval date | 11 May 2020 | ||||||||||||
| (Est.) release date | June 2020 | ||||||||||||
| ASIN |
B08D3693SV multiple uses | ||||||||||||
| Country of manuf | Taiwan | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 | Qualcomm IPQ6010 | ||||||||||||
| Chip2 | Qualcomm QCN5022 | ||||||||||||
| Wireless interface OUI | 44:A5:6E | ||||||||||||
| Antenna Connector Type | U.FL | ||||||||||||
| MIMO status | 2x2:2 | ||||||||||||
| Wireless Standard | IEEE 802.11b/g/n/ax | ||||||||||||
| 802.11ax | up to 574 Mbps | ||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||
| Radio 2 | |||||||||||||
| Chip1 | Qualcomm IPQ6010 | ||||||||||||
| Chip2 | Qualcomm QCN5052 | ||||||||||||
| Wireless interface OUI | 44:A5:6E | ||||||||||||
| Antenna Connector Type | U.FL | ||||||||||||
| MIMO status | 2x2:2 | ||||||||||||
| Wireless Standard | IEEE 802.11a/n/ac/ax | ||||||||||||
| 802.11ax | up to 1201 Mbps | ||||||||||||
| 802.11ac | up to 867 Mbps | ||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||
| 802.11a | up to 54 Mbps | ||||||||||||
| WiFi Operating Frequency | 5 GHz | ||||||||||||
| |||||||||||||
| |||||||||||||
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Netgear devices with specifications, see Netgear.
Links of Interest
- Netgear WAX610 (AX1800) • PPage • PR
- FCC ID: PY320200497 (2020-05-11)
- Netgear WAX610Y (AX1800) • PPage
- FCC ID: PY320200498 (2020-07-12)
- Netgear WAX610PA (AX1800) • PPage
- See also BitsWRT NHX6018
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: qualcommax
OpenWrt Subtarget: ipq60xx
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: unknown
Current supported version: snapshot
OpenWrt Subtarget: ipq60xx
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: unknown
Current supported version: snapshot
LAN Comment: Qualcomm Atheros QCA8081 2.5G Phy
Install Comment:
Use "Boot up Backup Firmware" button in stock UI after initial flash.
Recovery Comment:
https://forum.openwrt.org/t/openwrt-support-for-netgear-wax610-wax610y-wax610pa/181995/22?u=serverror
Comment:
Outdoor version of Netgear WAX610
Install Comment:
Use "Boot up Backup Firmware" button in stock UI after initial flash.
Recovery Comment:
https://forum.openwrt.org/t/openwrt-support-for-netgear-wax610-wax610y-wax610pa/181995/22?u=serverror
Comment:
Outdoor version of Netgear WAX610
Please insert instructions here
Categories:
- Netgear
- Embedded system/access point
- Embedded System Qualcomm
- Embedded System IPQ6010
- Qualcomm
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System QCA8081
- Embedded System Qualcomm Atheros
- Qualcomm Atheros
- Manuf Senao
- OpenWrt Supported
- Embedded System QCN5022
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System QCN5052
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation