Netgear WGR613VAL

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
Wireless Router & Voice Adapter
Wikipedia Netgear
3rd Party Firmware
dd-wrt Incompatible
OpenWrt Incompatible
Tomato any flavor Incompatible
Platform
BrandModelRev Netgear WGR613VAL
FCC ID PY3WGR613VAL
Board ID 4900NV00
Type wireless router, analog phone gateway
CPU1 checkY Texas Instruments TNETV1060
CPU1 Type MIPS 4Kc
CPU1 Speed 166 MHz
Flash1 Chip Macronix MX29LV320ABTC
Flash1 Size 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip ICSI Model? x 2
ETH chip1 Texas Instruments TNETV1060
Switch Marvell 88E6060
Ethernet Port Count 1-WAN
3-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified
Ethernet OUI: 00:0F:B5 (16 E, 27 W)

Expansion IF types none specified
Power 12 VDC, 1.2 A
Connector type barrel
Other

Default SSID: NETGEAR (44 addl. devices)
Default IP address: 192.168.61.1
the IP 192.168.61.1 is used by 3 additional devices
of which 2 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 426 additional devices
of which 306 are Netgear devices

Manuf/OEM/ODM SerComm
Retail
FCC approval date 28 April 2005
Country of manuf Taiwan
Radio 1
Chip1 Texas Instruments TNETW1130
Chip2 Texas Instruments RC2422B
Wireless interface OUI none specified
Antenna Connector Type none specified
Wireless Standard IEEE 802.11b/g
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.

For a list of all currently documented Netgear devices with specifications, see Netgear.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

Presumed SerComm manufacture...

"4900NV00" is silkscreened on the wireless module.

Default settings (including the SSID) are per the FCC manual.