Netgear WNDR4000
abgn (AN750) | |
---|---|
N750 Wireless Dual Band Gigabit Router | |
![]() | |
Homepage | |
Support | |
Wikipedia | |
InfoDepot Wiki | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor | |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Netgear WNDR4000 |
FCC ID | |
IC ID | |
Type |
wireless router |
CPU1 ![]() |
Broadcom BCM4718A1 |
CPU1 Type |
MIPS 74Kc |
CPU1 Speed |
480 MHz |
Flash1 Chip |
Macronix MX25L6445E |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Winbond W9751G6JB-25 |
nvram Size |
64K |
ETH chip1 |
Broadcom BCM4718A1 |
Switch |
Broadcom BCM53115 |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: 20:4E:7F (17 E, 17 W), 20:E5:2A (5 E, 7 W), 4C:60:DE (6 E, 8 W), A0:21:B7 (9 E, 8 W), C4:3D:C7 (8 E, 5 W), E0:46:9A (14 E, 15 W), E0:91:F5 (12 E, 13 W) | |
Stock bootloader |
CFE |
Expansion IF types |
USB 2.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 2.5 A |
Connector type |
barrel |
Serial Port (UART) |
yes |
Additional chips | |
Other | |
Default IP address: 192.168.1.1 | |
Manuf/OEM/ODM |
Foxconn U12H181 T00 |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
FCC approval date | 03 March 2011 |
(Est.) release date | 27 February 2011 |
UPC |
606449077629 (UPC DB, On eBay) |
ASIN |
B004PA2B6C ![]() |
Country of manuf | China |
Physical | |
Dimensions |
223 x 153 x 31 mm (8.8 x 6.0 x 1.2 in) |
Radio 1 | |
Chip1 |
Broadcom BCM4718A1 |
Wireless interface OUI |
20:4E:7F, 20:E5:2A, 4C:60:DE, A0:21:B7, C4:3D:C7, E0:46:9A, E0:91:F5 |
Antenna Connector Type |
U.FL, Internal |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio cor_rev |
17 |
Radio 2 | |
Chip1 |
Broadcom BCM4331 |
Wireless interface OUI |
20:4E:7F, 20:E5:2A, 4C:60:DE, A0:21:B7, C4:3D:C7, E0:46:9A, E0:91:F5 |
Antenna Connector Type |
U.FL, Internal |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11a/n |
802.11n |
up to 450 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio cor_rev |
29 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Netgear device with specifications, see Netgear.
Overview
The manual states the default SSIDs are NETGEAR (b/g/n radio) and NETGEAR-5G
- (a/n radio).. but NETGEARXX and NETGEARXX-5G may instead be used.
"U12H181T00" and "REV. 1 GP" is silkscreened on the main board.
- OEM: Foxconn U12H181T00
Links of Interest
Wikis
Reviews
- C4:3D:C7 OUI
Forum threads
Third party firmware support
This device should be well supported by DD-WRT (see wiki + forum posts below)
- and partially supported by OpenWrt (Barrier Breaker (14.07) build).
While there is an OpenWrt build available, b43 currently lacks 11n support.
There is also support from Tomato Hyzoom
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Please insert instructions here
Flashing OpenWrt
![]() | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
![]() | Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt Wiki
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 14.07
Current supported version: 23.05.5
Unsupported Functions:
WiFi 2.4GHz partly, WiFi 5GHz
Please insert instructions here
Flashing Tomato
Supported from 2020.6.
Please insert instructions here
Pictures
- Netgear
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4718A1
- Broadcom
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System BCM53115
- Manuf Foxconn
- DD-WRT Supported
- OpenWrt Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System BCM4331
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation