Netis NX32U

abgn+ac+ax
Роутер netis NX32U с поддержкой Wi-Fi 6, Easy Mesh и портом USB 3.0
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Netis NX32U
FCC ID	none specified
Type	wireless router
CPU1 Y	MediaTek MT7981BA
CPU1 Type	ARM Cortex-A53
CPU1 Speed	1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip	ESMT Model?
Flash1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND)
RAM1 Size	256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3)
RAM1 Chip	Brand? Model?
ETH chip1	MediaTek MT7981BA
Switch	MediaTek MT7531AE
Ethernet Port Count	4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	USB 3.0
USB ports	1
USB Hub Compatible	Untested
Connector type	barrel
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	MediaTek MT7981BA
Chip2	MediaTek MT7976CN
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n/ax
802.11ax	up to 574 Mbps
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7981BA
Chip2	MediaTek MT7976CN
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n/ac/ax
AX-QAM	up to 2402 Mbps
802.11ax	up to 1201 Mbps
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Netis devices with specifications, see Netis.

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.2

LAN Hardware: MediaTek MT7531AE
WLAN Hardware: MediaTek MT7981BA, MediaTek MT7976CN
WLAN Comment: MIMO 2x2:2 on both bands
Installation method(s):
see git-commit
Install Comment:
Change U-Boot to OpenWrt U-Boot
Recovery method(s):
see git-commit
Recovery Comment:
OpenWrt U-Boot tftp recovery

git • >>

mediatek: add support for netis NX32U This PR adds support for netis NX32U router. Specification ------------- - SoC  : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3 GHz - RAM  : 256 MiB DDR3 - Flash  : SPI-NAND 128 MiB (ESMT) - WLAN  : MediaTek MT7976CN dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 2x2 - 5 GHz  : a/n/ac/ax, MIMO 2x2 - Ethernet  : 10/100/1000 Mbps x3 (LAN, MediaTek MT7531AE) 10/100/1000 Mbps x1 (WAN, SoC internal phy) - USB  : 3.0 - Buttons  : Mesh, Reset - LEDs  : 1x Power (green), unmanaged 1x Internet (green), gpio-controlled 1x WPS (green), gpio-controlled 1x WiFi 2.4 GHz (green), gpio-controlled 1x WiFi 5 GHz (green), gpio-controlled 1x LAN activity (green), switch-controlled 1x WAN activity (green), switch-controlled 1x USB (green), gpio-controlled - Power  : 12 VDC, 1 A Installation ------------ 1. Connect to the router using ssh (user: admin, pass: web interface password) 2. Backup: ``` cat /dev/mtd0 | gzip -1 -c > /tmp/mtd0_spi0.0.bin.gz cat /dev/mtd1 | gzip -1 -c > /tmp/mtd1_BL2.bin.gz cat /dev/mtd2 | gzip -1 -c > /tmp/mtd2_u-boot-env.bin.gz cat /dev/mtd3 | gzip -1 -c > /tmp/mtd3_Factory.bin.gz cat /dev/mtd4 | gzip -1 -c > /tmp/mtd4_FIP.bin.gz cat /dev/mtd5 | gzip -1 -c > /tmp/mtd5_ubi.bin.gz ``` 3. Download mtd backup from the /tmp dir of the router to your PC using scp protocol 4. Upload OpenWrt 'bl31-uboot.fip', 'preloader.bin' images to the /tmp dir of the router using scp protocol 5. Write FIP and BL2 (replace bootloader): ``` mtd write /tmp/openwrt-mediatek-filogic-netis_nx32u-bl31-uboot.fip FIP mtd write /tmp/openwrt-mediatek-filogic-netis_nx32u-preloader.bin BL2 ``` 6. Place OpenWrt 'openwrt-mediatek-filogic-netis_nx32u-initramfs-recovery.itb' image on the tftp server (IP: 192.168.1.254) 7. Erase 'ubi' partition and reboot the router: mtd erase ubi reboot 8. U-Boot automatically boot OpenWrt recovery image from tftp server to the RAM 9. Upload OpenWrt 'sysupgrade.itb' image to the /tmp dir of the router (IP: 192.168.1.1) using scp protocol 10. Connect to the router using ssh and run: ``` ubidetach -p /dev/mtd4; ubiformat /dev/mtd4 -y; ubiattach -p /dev/mtd4 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB sysupgrade -n openwrt-mediatek-filogic-netis_nx32u-squashfs-sysupgrade.itb ``` Recovery -------- 1. Place OpenWrt 'openwrt-mediatek-filogic-netis_nx32u-initramfs-recovery.itb' image on the tftp server (IP: 192.168.1.254) 2. Press “Reset” button and power on the router. After ~10 sec release the button. 3. Use OpenWrt initramfs system for recovery +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | LAN | dc:xx:xx:d1:xx:18 | label | | WAN | dc:xx:xx:d1:xx:1a | label+2 | | WLAN 2g | de:xx:xx:11:xx:19 | | | WLAN 5g | de:xx:xx:71:xx:19 | | +---------+-------------------+-----------+ The LAN MAC was found in 'Factory', 0x1fef20 The WAN MAC was found in 'Factory', 0x1fef26 The WLAN 2g/5g MAC prototype was found in 'Factory', 0x4