Nexx WT1510U

bgn (N150)
wireless router
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Nexx WT1510U
FCC ID	N28WT1510U
Type	wireless router
CPU1	Ralink RT5350
CPU1 Type	MIPS 24KEc
CPU1 Speed	360 MHz
Flash1 Chip	Macronix Model?
Flash1 Size	? MiB
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	ESMT M12L2561616A-6T
ETH chip1	Ralink RT5350
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	? VAC ~ ? Hz, ? A
Connector type	AC (direct)
Other
Default IP address: 192.168.1.253 the IP 192.168.1.253 is used by 8 additional devices of which 0 are Nexx devices Default login user: admin Default login password: admin admin:admin credentials used by 1342 additional devices of which 2 are Nexx devices
Radio 1
Chip1	Ralink RT5350
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Nexx device with specifications, see Nexx.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

The default SSID follows the pattern of NEXX_Pebble_XXXXXX (upper case hex digits) in the FCC 'manual'. Default credentials are taken from the FCC manual.