Novarq Tactical 1000
From TechInfoDepot
Jump to navigationJump to search
| Enterprise Switch | |
|
| |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Novarq Tactical 1000 |
| CPU1 | Microchip LAN9696 |
| Flash1 Size | 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (QSPI NOR) |
| Flash2 Chip | 16 GiB Model? |
| RAM1 Size | 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (DDR4) |
| ETH chip1 | Microchip LAN9696 |
| Switch Chip1 | Microchip LAN9696 |
| Switch Chip2 | Microchip LAN8804 |
| Switch Chip3 | Microchip LAN8804 |
| Switch Chip4 | Microchip LAN8804 |
| Switch Chip5 | Microchip LAN8804 |
| Ethernet Port Count | 24-1GbE |
| Ethernet connector | 8P8C |
| Wired Standard | IEEE 802.3i/3u/3ab |
| Auto-MDIX | unspecified |
| Switch Class | managed |
|
Ethernet OUI: none specified | |
| Expansion IF types | SFP+, USB 2.0 Type-A, USB-C |
| SFP ports | 4 |
| Stock bootloader | U-Boot |
| Power | 12 VDC, ? A |
| Connector type | barrel |
| Serial Port (UART) | yes, 115200 / 8N1 |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Microchip (SMSC) chipsets with specifications, see Microchip.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: microchipsw
Subtarget: lan969x
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: 25.12.6
Subtarget: lan969x
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: 25.12.6
LAN Comment: 24x 1 GbE via LAN8814 Phys over QSGMII, 4x SFP+, 1x GbE managment via LAN8840 Phy
WLAN Hardware: none
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
WLAN Hardware: none
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
| git • >> |
|---|
microchipsw: lan969x: add Novarq Tactical 1000 Novarq Tactical 1000 is a LAN9696 based switch. Specifications: * CPU: Microchip LAN9696 switch SoC * DRAM: 2GB DDR4 * Storage: * 32MB QSPI NOR * 16GB eMMC * Networking: * 24 x 10/100/1000 RJ45 via LAN8804 Quad PHY-s over QSGMII * 4 x 100/1000/2500/5000/10000 SFP+ ports * 1 x 10/100/1000 management RJ45 via LAN8840 PHY over RGMII (U-Boot too) * USB: 1 x USB2.0 Type-A * Management via USB-C (MCP2200): * UART @ 115200 baud (Default), 921600 possible * GPIO-s for bootstrap and reset * LED-s: * 2 per networking port (Green and Yellow) * Green status LED * Soft reset GPIO * Power: 12V DC barrel jack * External PoE: * Option for PoE add-on * Temperature Sensors: * TMP1075 onboard * CPU temperature * Microchip MCP79402 RTC with battery back-up * Microchip ATECC608C secure peripheral * CPU heatsink with PWM fan * Onboard header for case fan Installation instructions: 1. Connect to UART via the USB-C port 2. Connect the management port 3. Boot and interrupt U-Boot 4. TFTP the OpenWrt initramfs image and boot it 5. SCP the OpenWrt eMMC GPT image to a running OpenWrt initramfs to /tmp openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img.gz And decompress it via: gzip -d /tmp/openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img.gz 6. Wipe eMMC with: dd if=/dev/zero of=/dev/mmcblk0 bs=1M 7. Flash OpenWrt eMMC image with: dd if=/tmp/openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img of=/dev/mmcblk0 After a restart OpenWrt will boot, and then regular sysupgrade can be used for upgrades. Signed-off-by: Robert Marko |