Orange Livebox 4

multiple revisions of this device, use caution

abgn+ac (AC22002R)
dsl modem, wireless router, analog phone gateway
Wikipedia	Livebox 4 on en.wikipedia Livebox 4 on fr.wikipedia
WikiDevi.wi-cat.ru	Orange Livebox 4
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Status Unknown
Platform
Brand • Model • Rev	Orange Livebox 4
FCC ID	none specified
Type	dsl modem, wireless router, analog phone gateway
CPU1	Broadcom BCM63138
CPU1 Type	ARM Cortex A9 (v7l) rev 1
CPU1 Speed	1.0 GHz ( 2 cores )
CPU2	Quantenna QT3840BC
CPU2 Type	ARC 700
CPU2 Speed	500 MHz ( 2 cores )
Flash1 Chip	Spansion S34ML04G200TFI00
Flash1 Size	512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
Flash2 Chip	Winbond W25Q80BVSIG
Flash2 Size	1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br />
RAM1 Size	512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip	Nanya NT5CC512M8EN-DI x 2
ETH chip1	Broadcom BCM63138
Switch	Broadcom BCM63138
Ethernet Port Count	1-1GbE-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: B0:98:2B (1 E, 1 W) Ethernet OUI: B0:98:2B (1 E, 1 W)
Stock bootloader	U-Boot 37.4.0.28 Quantenna 7.21.3.1-138B0-full
Stock FW OS	Linux 2.6.35.12 Topaz 3.4.11-rt19 BCM
Expansion IF types	USB 3.0, SATA, SFP
USB ports	2
SATA Ports	1
SFP ports	1
USB Hub Compatible	Untested
Power	12 VDC, 2.5 A
Connector type	barrel
Serial Port (UART)	yes, 4-pin header, x4, (115200 8N1)
JTAG Port	yes, 10-pin header, x2
Flags: VDSL2, ADSL2+, Wave2, MU-MIMO, G.Vector, DECT, VoIP, Fiber Optic Link
Additional chips DECT SoC;DSP Group;DCX81;DCX81AC0CFAE3FNC, DSPG, PM1M36.0C, TMCI29D0003A 1435, TMCT10D;1; DECT Flash;Winbond;W25Q80;Winbond, 25Q80BVSIG, 1444;1; VoIP Chip;Microsemi;ZL88601;ZL88601, Z D (e3), 1426MAE;1;64-pin QFN;9x9; SiLabs;Si32176;
Other
Default SSID: Livebox_XXXX (2 addl. devices) Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1323 additional devices of which 2 are Orange devices Default login user: admin Default login password: blank admin:blank credentials used by 365 additional devices of which 1 are Orange devices
Manuf/OEM/ODM	Sagemcom
Retail
(Est.) release date	19 May 2016
EAN	3561292235220 (UPC DB, On eBay)
Radio 1
Chip1	Broadcom BCM43602
Wireless interface OUI	B0:98:2B
Antenna Connector Type	RP-SMA
MIMO status	3x3:3
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 450 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio cor_rev	40
Radio 2
Chip1	Quantenna QT3840BC
Chip2	Quantenna QT2518B
Wireless interface OUI	B0:98:2B
Antenna Connector Type	RP-SMA
MIMO status	4x4:4
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 1733 Mbps
802.11n	up to 600 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand Orange Livebox + Broadcom Broadcom Quantenna Orange Livebox 2.0 Ikanos Atheros Orange Livebox 2.1 Lantiq (Intel) Lantiq Orange Livebox 4 Broadcom Broadcom Quantenna Orange Livebox 5 Broadcom Broadcom Quantenna Orange Livebox 6 Broadcom Broadcom Broadcom Orange Livebox Next 2.2 Lantiq Broadcom Broadcom Orange Livebox Pro 2 Ikanos Atheros

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.

For a list of all currently documented Orange device with specifications, see Orange.

• 1733 Mbps - 4SS 5GHz 802.11ac (80MHz chan.),

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = AC2200 class

Overview

EN : Orange Livebox is an ADSL wireless router available to customers of Orange's Broadband services in the United Kingdom, Kenya, Guinea, France, Tunisia, Spain, Jordan, the Netherlands, Switzerland, Poland, Belgium, Orange's Mauritian partner MyT, Lightspeed Communications in Bahrain and Orange Botswana. Depending on the model, it is manufactured by Inventel, Sagem or ZTE. The Livebox is also known as FunBox in some countries like Poland, Ivory Coast and Senegal.
FR : La Livebox est un appareil électronique fourni par le fournisseur d'accès à Internet Orange (anciennement Wanadoo) à ses abonnés ADSL et FTTH en France, au Royaume-Uni, en Belgique, en Pologne, aux Pays-Bas, en Suisse, en Espagne, en Côte d'Ivoire, au Sénégal, en Tunisie et à ses abonnés WiMAX au Cameroun. La Livebox est commercialisée sous le nom de FunBox dans certains pays comme la Pologne, la Côte d'Ivoire et le Sénégal1. Elle permet de bénéficier du triple play.

Links of Interest

• Livebox 4 on fr.wikipedia.org
• Press release
• Orange - Telecom France (Sagemcom) • Livebox

OUI: B0:98:2B (Sagemcom Broadband SAS)

• Orange Livebox on RedesZone
• BCM63138 CPU info

JTAG-Serial Info

Serial

Boot log

new boot log (Broadcom)

---- BTRM V1.6 PMCS AFEL PWRZ MEML PMCD MEMP CODE ZBSS MAIN CACH OTP? OTPP ROTB SCBT NAND IMG? IMGL HDR? HDRP MCV? KEY? KEYA MID? MIDP MCVA SBI? SBIA PASS ---- HELO 4.1603-1.0.38-116.141 CPU0 PMCM PMCS AFEL PWRZ MEML APMT PMCD L1CD MMUI CODE ZBBS MAIN DRAM NVRAM memcfg 0x507 MCB chksum 0xf66e5b14 DDR3-1600 CL11 512MBx2 memsys_init call phy init returns 0x00000000 MEMC init size 2 clock 6 memsys_init call shmoo returns 0x00000000 PASS Version cfe-rom: 7.21.3.1 FPS0 SVOL NGEO FVLY FVLY RVOL KEY1 RVOL BTL? BTLA PASS J2EP Base: 4.16_03 CFE version 1.0.38-116.141 for BCM963138 (32bit,SP,LE) Build Date: Thu Mar 3 15:14:04 CET 2016 (g110981@rmm-p1303058fl) Copyright (C) 2000-2013 Broadcom Corporation. Version cfe-ram: 7.21.3.1 Init SSD1322 version 0.3.0 Boot Strap Register: 0x7dfdfc2f Chip ID: BCM63136B0, ARM Cortex A9 Dual Core: 1000MHz Total Memory: 1073741824 bytes (1024MB) NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes NAND flash device: Spansion S34ML04G1, id 0x01dc block 128KB size 524288KB pmc_init:PMC using DQM mode Board IP address : 192.168.1.1:ffffff00 Host IP address : 192.168.1.100 Gateway IP address : Run from flash/host/tftp (f/h/c) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Default host ramdisk file name : Default ramdisk store address : Board Id (0-24) : MIB4 Number of MAC Addresses (1-32) : 10 Base MAC Address : 84:a1:d1:65:35:82 PSI Size (1-64) KBytes : 24 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Auxillary File System Size Percent: 0 MC memory allocation (MB) : 4 TM memory allocation (MB) : 20 WLan Feature : 0x00 Voice Board Configuration (0-2) : SI32176 pmc_switch_power_up: Rgmii Tx clock zone1 enable 1 zone2 enable 0. Info: Disabling Eth Port4 LINK DOWN IMP Port Creating CPU ring for queue number 0 with 32 packets descriptor=0x00f87a04 Done initializing Ring 0 Base=0x42a1ba40K End=0x42a1bc40K calculated entries= 32 RDD Base=0x02a1ba40K descriptor=0x00f87a04 Initializing UBI to launch u-boot! Running UbiScan... Found 852 UBI logical blocks on NAND already found a layout volume with higher sqnum UBI Layout volume is on logical block 706 initialize_ubi...cferam reading uboot ======================= !!! UBI volume uboot has id 2 read 950720 bytes from UBI volume 2 We got aes_key1 UBI volume aes_key2 has id 9 We got aes_key2 enc read 64 bytes from UBI volume 9 Ubi U-Boot Entry at 0x00100000 Closing network. Starting program at 0x00100000 U-Boot 2011.12 (Mar 03 2016 - 15:12:52) Version: 7.21.3.1-138B0-full 256MB-limited u-boot DRAM: 1 GiB NAND: 512 MiB SSD1322: Framebuffer driver for Solomon Systech's "SSD1322" OLED screen controller on Sagemcom's RGWs Grayscale Mode SSD1322: Driver Version (v0.3.0) Using default environment In: serial Out: serial Err: serial Creating 1 MTD partitions on "nand0": 0x0000000c0000-0x00001fb00000 : "mtd=1" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=1" UBI: MTD device size: 506 MiB UBI: number of good PEBs: 4050 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 256 UBI: number of internal volumes: 1 UBI: number of user volumes: 14 UBI: available PEBs: 2949 UBI: total number of reserved PEBs: 1101 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 59/30 Read 6632 bytes from volume permanent_param to 0df23ca8 Unable to retrive mac_addr from lanBaseMacAddr mac_addr set according to wanBaseMacAddr NVRAM MAC addr:84a1d1653582 No need to update NVRAM mac addr Net: pmc_init:PMC using DQM mode Creating CPU ring for queue number 0 with 32 packets descriptor=0x0ffe46d4 Done initializing Ring 0 Base=0x4fa0c960 End=0x4fa0cb60 calculated entries= 32 RDD Base=0x0fa0c960 descriptor=0x0ffe46d4 BCM63xxx_RUN sb3: sb3_sagem_init() sb3: action: 1007 sb3: sb3_wait_for_magic() sb3: action: 1002 Aes_key2 is available Read 64 bytes from volume aes_key_operator to 0dedee6c sb3: sb3_boot( operational ) sb3: top available addr 0x0ddd0000, ram available = 0xcdd0000 sb3: read image operational size=3203000 to address=abc0000 sb3_load_ubivol: max_load_size=215810048 Read 52441088 bytes from volume operational to 0abc0000 sb3: image operational has gsdf format sb3: image operational signature OK sb3: No pre-boot commands sb3: setting kernel args bootm ABDF000 ## Booting kernel from Legacy Image at 0abdf000 ... Image Name: FTFR_3.2.18 Created: 2017-09-20 9:36:56 UTC Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 3276800 Bytes = 3.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... init started: BusyBox v1.13.3 (2017-09-20 11:11:55 CEST) starting pid 516, tty '': '/etc/init.d/sysinit' SYSINIT SoftAtHome HGW version: FTFRSF3.2.18#1 Compiled on sah2bld09.be.softathome.com, Wed, 20 Sep 2017 11:35:33 +0200 With toolchain gcc version: arm-unknown-linux-gnueabi-gcc (crosstool-NG git+9f5f159-dirty - SoftAtHome 1.0.1) 4.8.3 Mounting tmpfs filesystem (/tmp) ... panic_on_page_allocation_failure flag is not present in this kernel release... Init port eth1 Init port eth2 Init port eth3 Init port eth4 Init port eth6 Success Broadcom Packet Flow Cache Learning of GRE flows Tunnel<DISABLED> PassThru<DISABLED> ethernet@wirespeed is enabled ethernet@wirespeed is enabled ethernet@wirespeed is enabled ethernet@wirespeed is enabled ethernet@wirespeed is enabled Note: Loading 6300 MDK (default) driver for 0 chip Switch MDK: num_eth6 (Ext switch port: 5) (Logical Port: 13) Link UP 1000 mbps full duplex switches = 1eth6 (Ext switch port: 7) (Logical Port: 15) Link UP 1000 mbps full duplex Switch MDK: unit = 1; phySkipping Link UP - one of other LAG member is already UP <0x2000> _pbmp = 0x1f; config_pbmp = 0xbf nophy_pbmp = 0xa0 unit = 1; port=5 force MAC link up unit = 1; port=7 force MAC link up Switch MDK link poll thread: unit=1; phypbmp=0x1f config_pbmp=0xbf 1+0 records in 1+0 records out 128 bytes (128 B) copied, 0 s, 0.000000 kB/s modprobe: Failed to load module libata: File exists. Start MiB4 Fan Control eth5 (Ext switch port: 4) (Logical Port: 12) Link UP 0 mbps half duplex modprobe: Failed to load module libahci: File exists. Starting system message bus 1024+0 records in 1024+0 records out 1024 bytes (1024 B) copied, 0 s, 128.000000 kB/s ifconfig: invalid number 'dev/null' Loading gmap modules ... Starting gmap module processes ... gMap started. 1+0 records in 1+0 records out 32 bytes (32 B) copied, 0 s, 0.000000 kB/s Registered fdproxy with device numbers 252,0 1+0 records in 1+0 records out 32 bytes (32 B) copied, 0 s, 0.000000 kB/s 1+0 records in 1+0 records out 32 bytes (32 B) copied, 0 s, 5.333333 kB/s modprobe: Module cdc_acm not found. 1+0 records in 1+0 records out 32 bytes (32 B) copied, 0 s, 0.000000 kB/s Starting cwmpd 1+0 records in 1+0 records out 32 bytes (32 B) copied, 0 s, 4.000000 kB/s chown: unknown user/group figaro:pcb_users dataservice starting ... BCMPlugin.set_ep_status() done

old boot log (Broadcom)

---- BTRM V1.6 PMCS AFEL PWRZ MEML PMCD MEMP CODE ZBSS MAIN CACH OTP? OTPP ROTB SCBT NAND IMG? IMGL HDR? HDRP MCV? KEY? KEYA MID? MIDP MCVA SBI? SBIA PASS ---- HELO 4.1603-1.0.38-116.141 CPU0 PMCM PMCS AFEL PWRZ MEML APMT PMCD L1CD MMUI CODE ZBBS MAIN DRAM NVRAM memcfg 0x507 MCB chksum 0xf66e5b14 DDR3-1600 CL11 512MBx2 memsys_init call phy init returns 0x00000000 MEMC init size 2 clock 6 memsys_init call shmoo returns 0x00000000 PASS Version cfe-rom: 7.21.1.1 FPS0 SVOL NGEO FVLY FVLY RVOL KEY1 RVOL BTL? BTLA PASS J2EP Base: 4.16_03 CFE version 1.0.38-116.141 for BCM963138 (32bit,SP,LE) Build Date: Mon Feb 22 19:28:20 CET 2016 (g602540@rmm-p1188518fl) Copyright (C) 2000-2013 Broadcom Corporation. Version cfe-ram: 7.21.1.1 Init SSD1322 version 0.3.0 Boot Strap Register: 0x7dfdfc2f Chip ID: BCM63136B0, ARM Cortex A9 Dual Core: 1000MHz Total Memory: 1073741824 bytes (1024MB) NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes NAND flash device: Spansion S34ML04G1, id 0x01dc block 128KB size 524288KB pmc_init:PMC using DQM mode Board IP address : 192.168.100.1:ffffff00 Host IP address : 192.168.100.100 Gateway IP address : Run from flash/host/tftp (f/h/c) : f Default host run file name : Default host flash file name : tpr, Boot delay (0-9 seconds) : 1 Default host ramdisk file name : Default ramdisk store address : ux Board Id (0-24) : MIB4 Number of MAC Addresses (1-32) : 10 Base MAC Address : ac:84:c9:25:ab:32 PSI Size (1-64) KBytes : 24 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Auxillary File System Size Percent: 0 MC memory allocation (MB) : 4 TM memory allocation (MB) : 20 WLan Feature : 0x00 Voice Board Configuration (0-2) : SI32176 pmc_switch_power_up: Rgmii Tx clock zone1 enable 1 zone2 enable 0. Info: Disabling Eth Port4 LINK DOWN IMP Port Creating CPU ring for queue number 0 with 32 packets descriptor=0x00f8718c Done initializing Ring 0 Base=0x42a1ba40K End=0x42a1bc40K calculated entries= 32 RDD Base=0x02a1ba40K descriptor=0x00f8718c *** Press any key to stop auto run (1 seconds) *** Auto run second count down: 1�1�0 Initializing UBI to launch u-boot! Running UbiScan... Found 837 UBI logical blocks on NAND UBI Layout volume is on logical block fd7 initialize_ubi...cferam reading uboot ======================= !!! UBI volume uboot has id 3 read 950720 bytes from UBI volume 3 We got aes_key1 UBI volume aes_key2 has id 9 We got aes_key2 enc read 64 bytes from UBI volume 9 Ubi U-Boot Entry at 0x00100000 Closing network. Starting program at 0x00100000 U-Boot 2011.12 (Mar 03 2016 - 15:12:52) Version: 7.21.3.1-138B0-full 256MB-limited u-boot DRAM: 1 GiB NAND: 512 MiB SSD1322: Framebuffer driver for Solomon Systech's "SSD1322" OLED screen controller on Sagemcom's RGWs Grayscale Mode SSD1322: Driver Version (v0.3.0) Using default environment In: serial Out: serial Err: serial Creating 1 MTD partitions on "nand0": 0x0000000c0000-0x00001fb00000 : "mtd=1" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=1" UBI: MTD device size: 506 MiB UBI: number of good PEBs: 4050 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 256 UBI: number of internal volumes: 1 UBI: number of user volumes: 14 UBI: available PEBs: 2962 UBI: total number of reserved PEBs: 1088 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 70/2 Read 6632 bytes from volume permanent_param to 0df23ca8 Unable to retrive mac_addr from lanBaseMacAddr mac_addr set according to wanBaseMacAddr NVRAM MAC addr:ac84c925ab32 No need to update NVRAM mac addr Net: pmc_init:PMC using DQM mode Creating CPU ring for queue number 0 with 32 packets descriptor=0x0ffe46d4 Done initializing Ring 0 Base=0x4fa0c960 End=0x4fa0cb60 calculated entries= 32 RDD Base=0x0fa0c960 descriptor=0x0ffe46d4 BCM63xxx_RUN sb3: sb3_sagem_init() sb3: action: 1007 sb3: sb3_wait_for_magic() sb3: action: 1002 Aes_key2 is available Read 64 bytes from volume aes_key_operator to 0dedee6c sb3: sb3_boot( operational ) sb3: top available addr 0x0ddd0000, ram available = 0xcdd0000 sb3: read image operational size=2efc000 to address=aed0000 sb3_load_ubivol: max_load_size=215810048 Read 49266688 bytes from volume operational to 0aed0000 sb3: image operational has gsdf format sb3: image operational signature OK sb3: No pre-boot commands sb3: setting kernel args bootm AEEF000 ## Booting kernel from Legacy Image at 0aeef000 ... Image Name: FTFR_2.19.2 Created: 2016-10-07 17:44:32 UTC Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 3211264 Bytes = 3.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... SAGEMCOM reserve top mem 3fa00000-40000000 Memory policy: ECC disabled, Data cache writealloc creating a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL creating a MT_MEMORY_NONCACHED device at physical address of 0x0ea00000 to virtual address at 0xcea00000 with size of 0x1400000 byte for RDPA tm creating a MT_MEMORY_NONCACHED device at physical address of 0x0e600000 to virtual address at 0xce600000 with size of 0x400000 byte for RDPA mc On node 0 totalpages: 253952 free_area_init_node: node 0, pgdat c05feba0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1488 pages used for memmap Normal zone: 182320 pages, LIFO batch:31 HighMem zone: 528 pages used for memmap HighMem zone: 65520 pages, LIFO batch:15 pmc_init:PMC using DQM mode L310 cache controller enabled l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B PERCPU: Embedded 7 pages/cpu @c1809000 s5632 r8192 d14848 u32768 pcpu-alloc: s5632 r8192 d14848 u32768 alloc=8*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251904 Kernel command line: console=ttyS0,115200 earlyprintk debug root=mtd:rootfs init=/etc/preinit ro rootfstype=squashfs console=tty3 rootfs_offset=0x00345000 rootfs_size=0x02bb7000 uboot_ubivol=uboot mtdparts=nand:768k(bcm),5120k@-5120k(data),-@768k(partAll) ubi.mtd=ubi part_main=partAll part_boot=partAll image_ubivol=operational secure board_type=00030020 oek=0dee2a40 oiv=0dee3a78 UBI image volume: "operational" PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) allocated 2097152 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 230MB 762MB = 992MB total Memory: 998256k/998256k available, 50320k reserved, 264192K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) lowmem : 0xc0000000 - 0xef800000 ( 760 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc05897f8 (5638 kB) .init : 0xc058a000 - 0xc05b1600 ( 158 kB) .data : 0xc05b2000 - 0xc05ffa40 ( 311 kB) .bss : 0xc05ffa64 - 0xc0641560 ( 263 kB) Preemptible hierarchical RCU implementation. Dump stacks of tasks blocking RCU-preempt GP. NR_IRQS:256 Cortex A9 MPCORE GIC init DIST at fc01f000, CPU_IF at fc01e100 sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 4294967295ms Booting Linux on physical CPU 0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.11-rt19 (jenkins@sahwbld04) (gcc version 4.6.2 (crosstool-NG git+ab5c880 - SoftAtHome 1.0.2) ) #1 SMP PREEMPT Fri Oct 7 19:23:22 CEST 2016 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: BCM963138 bootconsole [earlycon0] enabled SAGEMCOM reserve top mem 3fa00000-40000000 Memory policy: ECC disabled, Data cache writealloc creating a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL creating a MT_MEMORY_NONCACHED device at physical address of 0x0ea00000 to virtual address at 0xcea00000 with size of 0x1400000 byte for RDPA tm creating a MT_MEMORY_NONCACHED device at physical address of 0x0e600000 to virtual address at 0xce600000 with size of 0x400000 byte for RDPA mc On node 0 totalpages: 253952 free_area_init_node: node 0, pgdat c05feba0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1488 pages used for memmap Normal zone: 182320 pages, LIFO batch:31 HighMem zone: 528 pages used for memmap HighMem zone: 65520 pages, LIFO batch:15 pmc_init:PMC using DQM mode L310 cache controller enabled l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B PERCPU: Embedded 7 pages/cpu @c1809000 s5632 r8192 d14848 u32768 pcpu-alloc: s5632 r8192 d14848 u32768 alloc=8*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251904 Kernel command line: console=ttyS0,115200 earlyprintk debug root=mtd:rootfs init=/etc/preinit ro rootfstype=squashfs console=tty3 rootfs_offset=0x00345000 rootfs_size=0x02bb7000 uboot_ubivol=uboot mtdparts=nand:768k(bcm),5120k@-5120k(data),-@768k(partAll) ubi.mtd=ubi part_main=partAll part_boot=partAll image_ubivol=operational secure board_type=00030020 oek=0dee2a40 oiv=0dee3a78 UBI image volume: "operational" PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) allocated 2097152 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 230MB 762MB = 992MB total Memory: 998256k/998256k available, 50320k reserved, 264192K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) lowmem : 0xc0000000 - 0xef800000 ( 760 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc05897f8 (5638 kB) .init : 0xc058a000 - 0xc05b1600 ( 158 kB) .data : 0xc05b2000 - 0xc05ffa40 ( 311 kB) .bss : 0xc05ffa64 - 0xc0641560 ( 263 kB) Preemptible hierarchical RCU implementation. Dump stacks of tasks blocking RCU-preempt GP. NR_IRQS:256 Cortex A9 MPCORE GIC init DIST at fc01f000, CPU_IF at fc01e100 sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 4294967295ms Booting Linux on physical CPU 0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.11-rt19 (jenkins@sahwbld04) (gcc version 4.6.2 (crosstool-NG git+ab5c880 - SoftAtHome 1.0.2) ) #1 SMP PREEMPT Fri Oct 7 19:23:22 CEST 2016 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: BCM963138 bootconsole [earlycon0] enabled SAGEMCOM reserve top mem 3fa00000-40000000 (...)

boot log (Quantenna)

Quantenna Mini U-Boot Version: v37.4.0.28 Built: janv. 14 2016 at 14:29:56 br 1G-FD Using br device TFTP from server 1.1.1.1; our IP address is 1.1.1.2 Filename 'u-boot.bin'. Load address: 0x88000000 Loading: *�Quantenna Mini U-Boot Version: v37.4.0.28 Built: janv. 14 2016 at 14:29:56 br 1G-FD Using br device TFTP from server 1.1.1.1; our IP address is 1.1.1.2 Filename 'u-boot.bin'. Load address: 0x88000000 Loading: *�##### done Bytes transferred = 71872 (0x118c0) Boot reached stage 13 Boot reached stage 12 Valid CRC found in flash restoring env... Boot reached stage 11 hw_config_id 65535: 'MIB4_MS_MAC_DUAL_0x1F831F83' Cold boot Reset status: 0x00000001 Info: data uncached: addr=0xc0000000 size=1024MB Info: text at 0x88040000, stack at 0x88013ffc(8192), heap at 0x88000000(73728), uboot size 177872 Info: i-cache is enabled Info: d-cache is enabled Info: CPU freq is 500000000, dev freq is 125000000 Info: Quantenna U-Boot version:v37.4.0.28 Info: build date 'Jun 29 2016', time '15:33:42' SPI flash info: name : mx25l512e jedec_id : 0xc22010 sector size : 4096 number of sector : 16 frequency : 104000000 flags : 0x2 lock : DDR_INIT: type = 16, speed = 2, size = 134217728 500MHz BDA at 0x80002000 In: serial Out: serial Err: serial Boot reached stage 64 Boot reached stage 65 br Hit any key to stop autoboot: 2 ��� 1 ��� 0 Boot reached stage 80 1G-FD 1G-FD Using br device TFTP from server 1.1.1.1; our IP address is 1.1.1.2 Filename 'topaz-linux.lzma.img'. Load address: 0x83000000 Loading: *�################################################################################################################################## ################################################################################################################################# ################################################################################################################################## ################################################################################################################################## ################################################################################################################################# ####################################### done Bytes transferred = 5029322 (0x4cbdca) Boot reached stage 81 Boot reached stage 84 Boot reached stage 1 ## Booting kernel from Legacy Image at 83000000 ... Boot reached stage 2 Boot reached stage 3 Image Name: topaz-linux Image Type: arc Linux Kernel Image (lzma compressed) Data Size: 5021130 Bytes = 4.8 MB Load Address: 8493a000 Entry Point: 8493a000 Qtn flags: 00000001 Verifying Checksum ... OK Boot reached stage 4 Boot reached stage 5 Boot reached stage 6 Boot reached stage 14 Uncompressing Kernel Image ... OK Boot reached stage 7 Boot reached stage 8 Command line TAG setup Params->u.cmdline.cmdline console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535 p console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535 ## Unset TAG qtn_flags 1 ## Transferring control to Linux (at address 8493a000) ATAG parameters 88068dd0 - 88068e28... [ 0.000000] Linux version 2.6.35.12 (sahverotech3@sahwcmp0068) (gcc version 4.2.1 (ARC_2.3)) #2 Thu Oct 6 15:13:29 CEST 2016 [ 0.000000] Parsing ATAG parameters from bootloader [ 0.000000] ATAG_CORE: successful parsing [ 0.000000] ATAG_CMDLINE: command line = console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535 [ 0.000000] Board id: 65535 [ 0.000000] ATAG_HW_CONFIG_ID: hw_config_id = 65535 [ 0.000000] [ 0.000000] Processor Family: ARC 700 [0x33] [ 0.000000] CPU speed : 500.00 Mhz [ 0.000000] Timers: TIMER1 TIMER0 [ 0.000000] Interrupt Vect Base: 0x88052c00 [ 0.000000] Peripheral Base: NOT present; assuming 0xCOFC0000 [ 0.000000] Data UNCACHED Base (I/O): start 0xc0 Sz, 1024 MB [ 0.000000] ARC700 MMU Ver [2] [ 0.000000] PAGE SIZE 8k [ 0.000000] JTLB 128 x 2 = 256 entries [ 0.000000] uDTLB 8 entr, uITLB 4 entr [ 0.000000] TLB Refill "will NOT" Flush uTLBs [ 0.000000] Detected I-cache : [ 0.000000] Type=2 way set-assoc, Line length=32, Size=16K (enabled) [ 0.000000] Detected D-cache : [ 0.000000] Type=4 way set-assoc, Line length=32, Size=16K (enabled) [ 0.000000] Extensions: [ 0.000000] MPY: 32x32 with ANY Result Reg MAC MPY: Dual 16 x 16 and 32 x 16 [ 0.000000] DCCM: N/A ICCM: N/A [ 0.000000] CRC: N/A, SWAP: Present NORM: Present [ 0.000000] Min-Max: Present, Barrel Shifter: Present [ 0.000000] Ext Arith Insn: Present [ 0.000000] Floating Point Extension: N/A [ 0.000000] On node 0 totalpages: 16383 [ 0.000000] free_area_init_node: node 0, pgdat 8581dd1c, node_mem_map 858cc024 [ 0.000000] Normal zone: 72 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16311 pages, LIFO batch:3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16311 [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535 [ 0.000000] bootconsole [ruby_early0] enabled [ 0.000000] PID hash table entries: 512 (order: -2, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 3, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 2, 32768 bytes) [ 0.000000] Memory: 39392KB available (2154K code,1197K data, 12584K init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] clockevent mode switch to [1] [ 0.000000] clockevent mode switch to [2] [ 0.000000] Calibrating delay loop... 249.03 BogoMIPS (lpj=622592) [ 0.115000] pid_max: default: 4096 minimum: 301 [ 0.120000] Mount-cache hash table entries: 1024 [ 0.125000] Starting run_ksoftirqd, stack (thread_info) at 85842000 cpu 0 [ 0.130000] NET: Registered protocol family 16 [ 0.135000] Topaz heap in SRAM 88016780<->88020000, B2 BASE 17800 [ 0.150000] bio: create slab <bio-0> at 0 [ 0.155000] watch64: 2003/08/22 Josef 'Jeff' Sipek <jeffpc@xxxxxxxxxxxxx> [ 0.160000] watch64: Enabling Watch64 extensions...done. [ 0.165000] Switching to clocksource ARC Timer1 [ 0.175000] NET: Registered protocol family 2 [ 0.180000] IP route cache hash table entries: 2048 (order: 0, 8192 bytes) [ 0.185000] TCP established hash table entries: 4096 (order: 2, 32768 bytes) [ 0.190000] TCP bind hash table entries: 4096 (order: 1, 16384 bytes) [ 0.195000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.200000] TCP reno registered [ 0.205000] NET: Registered protocol family 1 [ 0.695000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.705000] msgmni has been set to 76 [ 0.705000] io scheduler noop registered (default) [ 1.135000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled [ 1.145000] serial8250.0: ttyS0 at MMIO 0xf0000000 (irq = 48) is a 16550A [ 1.155000] brd: module loaded [ 1.165000] loop: module loaded [ 1.170000] spi_flash: Force not to support Protect Mode [ 1.175000] Creating 3 MTD partitions on "spi_flash": [ 1.180000] 0x000000000000-0x000000005000 : "uboot" [ 1.185000] 0x000000005000-0x00000000b000 : "uboot_env" [ 1.195000] 0x00000000b000-0x000000010000 : "data" [ 1.200000] spi_flash: SPI flash driver initialized successfully! [ 1.205000] ruby_health loading [ 1.205000] HBM pool: emac rx 0x0 to 0x8000, wmac rx 0x8000 to 0xa000 [ 1.720000] HBM meta: emac rx 0x63c040 to 0x6bc040, wmac rx 0x6bc080 to 0x6dc080 [ 1.725000] topaz_hbm_init_pool_list pool 0 pool_list 0x88000000 bus_range 0x6ec400 to 0x26ec400 sz 4096 count 8192 [ 1.725000] topaz_hbm_init_pool_list pool 1 pool_list 0x88008000 bus_range 0x26fc400 to 0x48fc400 sz 17408 count 2048 [ 1.725000] topaz_hbm_init_pool_list pool 3 pool_list 0x8800a000 bus_range 0x0 to 0x0 sz 0 count 4096 [ 1.730000] topaz_busmon_init success [ 1.735000] topaz_temp_sens_init success [ 1.740000] u32 classifier [ 1.740000] input device check on [ 1.745000] Actions configured [ 1.750000] Netfilter messages via NETLINK v0.30. [ 1.755000] nf_conntrack version 0.5.0 (615 buckets, 2460 max) [ 1.760000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.765000] TCP cubic registered [ 1.770000] NET: Registered protocol family 10 [ 1.775000] NET: Registered protocol family 17 [ 1.780000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 1.785000] All bugs added by David S. Miller <davem@redhat.com> [ 1.790000] turn off boot console ruby_early0

See also

• Orange Livebox 1.1
• Orange Livebox 2

• Orange Livebox 2
• Orange Livebox 2.1
• Orange Livebox pro 2

• Orange Livebox 3

• Orange Livebox 3 Play
• Orange Livebox Pro 3

• Orange Livebox 4

• Orange Livebox 4
• Orange Livebox Pro 4