PRO-NETS WR850R
bgn (N300) | |||||
---|---|---|---|---|---|
wireless router | |||||
3rd Party Firmware | |||||
dd-wrt |
Status Unknown | ||||
OpenWrt |
Status Unknown | ||||
Tomato any flavor |
Incompatible | ||||
Platform | |||||
Brand • Model • Rev |
PRO-NETS WR850R | ||||
FCC ID | |||||
Type |
wireless router | ||||
CPU1 |
Brand? Model? | ||||
Flash1 Chip |
Brand? Model? | ||||
Flash1 Size |
? MiB | ||||
RAM1 Size |
? MiB | ||||
RAM1 Chip |
Brand? Model? x 2 | ||||
ETH chip1 |
Brand? Model? | ||||
Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u | ||||
802dot11 OUI: none specified | |||||
Expansion IF types |
none specified | ||||
Power |
12 VDC, 1 A | ||||
Other | |||||
Default IP address: 192.168.1.1 | |||||
Retail | |||||
Availability | OEM, unknown | ||||
FCC approval date | 10 August 2009 | ||||
Radio 1 | |||||
Chip1 |
Realtek RTL8190 | ||||
Chip2 |
Realtek RTL8256 | ||||
Chip3 |
Realtek RTL8256 | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
U.FL | ||||
MIMO status |
2x2:2 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
802.11n |
up to 300 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
|
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented PRO-NETS device with specifications, see PRO-NETS.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"G1700717117130 V1.3" and the FCC ID is silkscreened on the board.
The WR850RD has RP-SMA connectors (connected to internal U.FL connectors), while the WR850R has two integral antennas.
The default IP and credentials are based on the submitted manual in the FCC documents.
The processor is probably a RTL8651C.. but this is not confirmed. The processor has a heat spreader on top of it in the FCC photos.
The FCC test report states that the trade names include PRO-NETS, Speed Com+, and Jet Com.