We believe we've resolved the timeouts on page updates following yesterday's server operating system upgrade. Please let us know if you notice any further issues or performance degradation.
Pace 5268AC
From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC2100) | |
---|---|
Wireless 802.11AC DSL Residential Gateway | |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Status Unknown |
Tomato any flavor | Status Unknown |
Platform | |
Brand • Model • Rev | Pace 5268AC |
FCC ID | PGR5200AC |
IC ID | 3439B-5200AC |
US ID | 6KRDL02B5200AC |
Type | CPE, dsl modem, wireless router |
CPU1 ![]() | Broadcom BCM63168 |
CPU1 Type | BMIPS4350 |
CPU1 Speed | 400 MHz ( 2 cores ) |
CPU2 ![]() | Quantenna QT3840BC |
CPU2 Type | ARC 700 |
CPU2 Speed | 500 MHz ( 2 cores ) |
Flash1 Chip | Samsung Model? |
Flash1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
Flash2 Chip | Winbond Model? |
Flash2 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI) |
RAM1 Size | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
RAM1 Chip | Samsung Model? |
RAM2 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM2 Chip | Samsung |
ETH chip1 | Broadcom BCM63168 |
Switch | Broadcom BCM53125 |
Ethernet Port Count | 4-1GbE-LAN |
Wired Standard | IEEE 802.3i/3u/3ab |
Stock bootloader | U-Boot |
Stock FW OS | Linux 2.6.30 |
Expansion IF types | USB 2.0 |
USB ports | 1 |
USB Hub Compatible | Untested |
Power | 12 VDC, 3 A |
Connector type | barrel |
Flags: | |
| |
Other | |
Default SSID: PACE501 | |
Manuf/OEM/ODM | Foxconn |
Retail | |
FCC approval date | 19 May 2014 |
Country of manuf | China |
Radio 1 | |
Chip1 | Broadcom BCM63168 |
Wireless interface OUI | 60:FE:20, F8:2C:18 |
Antenna Connector Type | U.FL |
MIMO status | 2x2:2 |
Wireless Standard | IEEE 802.11b/g/n |
802.11n | up to 300 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
Radio 2 | |
Chip1 | Quantenna QT3840BC |
Chip2 | Quantenna QT2518B |
Wireless interface OUI | 60:FE:20, F8:2C:18 |
Antenna Connector Type | none specified |
MIMO status | 4x4:4 |
Wireless Standard | IEEE 802.11a/n/ac |
802.11ac | up to 1733 Mbps |
802.11n | up to 600 Mbps |
802.11a | up to 54 Mbps |
WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.
For a list of all currently documented Pace devices with specifications, see Pace.
Overview
- 5268AC XDSL VOICE GATEWAY • FCC Doc
- VDSL2, ADSL2+ Gateway with 802.11ac Wi-Fi & HomePNA
- 5GHz 4x4 802.11ac (1733Mbps) / 2.4GHz 2x2 802.11n (300Mbps)
- Dual-core processor with hardware accelerated routing for exceptional performance.
- Based on cutting-edge 4x4 MU-MIMO Wi-Fi technology 5268AC intelligent gateway.
- In 2.4GHz band gateway uses 802.11n 2x2 MIMO technology, transmit power 100 mW.
- Integrated Gigabit Ethernet switch and dedicated Gigabit Ethernet WAN port enables.
The manual states the default IP is 192.168.1.254.
Links of Interest
- Product page (Arris)
Forum threads
JTAG-Serial Info
Serial
Bootlog |
---|
@@mmmmmmmmoyM~oV3g_w_o{{{{~KmK!S}_p[b?}cks|}{m{__o ! I0 <I0MyY~o|3q|9{}c{6Dws>{XA A0qy }~{}[[o q ZQp >?kq0I{l{_[__m{?oy_ HOLA CPUI L1CI HOLA CPUI L1CI DRAM ---- PHYS STRF 400H PHYE DDR3 SIZ4 SIZ3 DINT USYN LSYN MFAS LMBE RACE PASS ---- CODE L12F MAIN **************************************************************** **************************************************************** ************************$ U-Boot 1.3.3(8.99.61.509224) (Aug 5 2015 - 18:13:23) CPU: Broadcom BCM63268 v8.0 64 kB I-Cache 32 kB D-Cache BOARD: Pace Broadcom BCM63168D0 DRAM: 256 MB Clearing heap 4259840 bytes from 8fb84000 to 8ff94000 NAND: BCMNAND: Bootcfg=40000001 Cfg=15142200 CsAndNor=0 Base=0 Acc=f7001010 Id=c2f1801d BCMNAND: System strap=1fff5bf 2048,11,1 BCMNAND: NAND: AccControl=f7001010 BCMNAND: Nand Part Name: Macronix MX30LF1G08AA LP BCMNAND: size=128MB, block=128KB, page=2 GiBB, spare=64 BCMNAND: Init done: 0 OOB[1/131072]ff ff cf 69 ff ff 99 a6 42 6f 6f 74 43 6f 64 65 OOB[2/262144]ff ff 96 ff ff ff 3 f 42 6f 6f 74 43 6f 64 65 OOB[3/393216]ff ff cf 0 ff ff f ff 42 6f 6f 74 43 6f 64 65 OOB[4/524288]ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB scan: Found pattern mismatch at 4/524288 Fixed up MTD partition to mtdparts=mtd-0:524288(loader),1048576(mtdoops),-(tlpart) OpenTL: Going to add mtd partition tlpart Creating 1 MTD partitions on "nand0": 0x00180000-0x08000000 : "tlpart" BCMNAND: IsBad block at off=69337088 is bad OPENTL: add_mtd for tlpart nflaattach: pages per unit=64 shift=17 sectors_per_page=4 TL_debug: before mount mediasize=64768 size=64768 partiton 0 to 1012 spares=85 Adjusting virtual blocks 1012 to account for 30 bb blocks Adjusting virtual blocks 982 to account for 1 stat blocks resetting statsBlock statistics Num Used=712 Num Free=299 Bad=1 TL_debug: after mount stat_blocks=1 virt=982 head_pages=1 geometry wasted 252 sectors nand_geom: cap=251132 cyl=980 nhead=16 nsectors=16 OPENTL: Found new opentla OpenTL: get_dev hook called -----------get_partition_info_disklabel: Called part=1------------ ** Checking 5 partitions... ** Partition(0) 8/80 blocksize=512 ** Partition(1) 88/80 blocksize=512 ** Partition(2) 0/3c200 blocksize=512 ** Partition(3) 108/78 blocksize=512 ** Partition(4) 180/3c080 blocksize=512 ** Part(1) is at 8 to 128 sectorsize=512 tldisk primary, 8:128 -----------get_partition_info_disklabel: Called part=2------------ ** Part(2) is at 136 to 128 sectorsize=512 tldisk backup, 136:128 env dump -----54 e4 2e ca 0 62 6f 6f 74 63 6d 64 3d 69 66 20 74 6c 20 63 68 65 6 3 6b 66 73 74 79 70 65 20 35 tldisk env part info: CRC=54e42eca/54e42eca env_size=65531 env dump -----54 e4 2e ca 0 62 6f 6f 74 63 6d 64 3d 69 66 20 74 6c 20 63 68 65 6 3 6b 66 73 74 79 70 65 20 35 tldisk env part info: CRC=54e42eca/54e42eca env_size=65531 In: serial Out: serial Err: serial Board Id : 260-2173300 Hello world Net: br0 Hit any key to stop autoboot: 0 OpenTL: get_dev hook called -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 OpenTL: get_dev hook called -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 OpenTL: get_dev hook called Using device opentl 0:5, directory: / -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 <DIR> 1024 . <DIR> 1024 .. <DIR> 1258496 lost+found <DIR> 1024 tmp <DIR> 1024 sys1 <DIR> 1024 bcm <DIR> 1024 sys2 <DIR> 1024 cm <DIR> 1024 pkg <DIR> 1024 sysinit <DIR> 1024 subsys 2 isupgrade <DIR> 1024 service <DIR> 1024 config OpenTL: get_dev hook called Using device opentl0, partition 5 -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 Loading from block device opentl device 0, partition 5: Name: Disklabel:4 Type: U-Boot File:/sys1/uImage -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 2990665 bytes read Upgrade Image present. Checking image integrity ## Checking Image at 80800000 ... Legacy image found Image Name: Install image Created: 2016-01-21 22:47:52 UTC Image Type: MIPS Linux Multi-File Image (gzip compressed) Data Size: 2990601 Bytes = 2.9 MB Load Address: 80010000 Entry Point: 80389b70 Contents: Image 0: 2232244 Bytes = 2.1 MB Image 1: 758345 Bytes = 740.6 kB Verifying Checksum ... OK Valid kernel Found OpenTL: get_dev hook called Using device opentl0, partition 5 -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 Loading from block device opentl device 0, partition 5: Name: Disklabel:4 Type: U-Boot File:/sys1/initrd -----------get_partition_info_disklabel: Called part=5------------ ** Part(5) is at 384 to 245888 sectorsize=512 ** Unable to read "/sys1/initrd" from opentl 0:5 ** No initrd Image ## Booting kernel from Legacy Image at 80800000 ... Image Name: Install image Created: 2016-01-21 22:47:52 UTC Image Type: MIPS Linux Multi-File Image (gzip compressed) Data Size: 2990601 Bytes = 2.9 MB Load Address: 80010000 Entry Point: 80389b70 Contents: Image 0: 2232244 Bytes = 2.1 MB Image 1: 758345 Bytes = 740.6 kB Verifying Checksum ... OK Uncompressing Multi-File Image ... OK ## Loading init Ramdisk from multi component Legacy Image at 80800000 ... ## U-boot passing env 0x80A21000 ## U-boot passing env 0xB9249 Starting kernel commandline=console=ttyS0,115200 mtdoops.mtddev=mtdoops mtdoops. record_size=131072 mtdparts=mtd-0:524288(loader),1048576(mtdoops),-(tlpart) init =/bin/init 6,afb63fb0,afb64440... [ 0.000000] Linux version 2.6.30 (buildbot@krackel) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #2 SMP PREEMPT Thu Jan 21 16:46:53 CST 2016 [ 0.000000] BCMNAND: Bootcfg=40000001 Cfg=15142200 CsAndNor=0 Base=0 Acc=f7001010 Id=c2f1801d [ 0.000000] BCMNAND: System strap=1fff5bf 2048,11,1 [ 0.000000] BCMNAND: NAND: AccControl=f7001010 [ 0.000000] BCMNAND: size=128MB, block=128KB, page=2 GiBB, spare=64 [ 0.000000] BRCMNAND device: block: 131072 page: 2048 name: nand0 [ 0.000000] Nand Scan: Block 529 is factory bad... [ 0.000000] >> nand_scan_part - Total 1 bad and 1023 good blocks found [ 0.000000] BRCM NAND flash device: name nand0, id 0xc2f1 size 131072KB [ 0.000000] detected as Boot Flash [ 0.000000] kerSysEarlyFlashInit: NVRAM size=4092 CRC 8e6f3237 8e6f3237 [ 0.000000] 260-2173300 prom init [ 0.000000] Found arg console=ttyS0,115200 of length 20 left=4074 [ 0.000000] Found arg mtdoops.mtddev=mtdoops of length 22 left=4053 [ 0.000000] Found arg mtdoops.record_size=131072 of length 26 left=4030 [ 0.000000] Found arg mtdparts=mtd-0:524288(loader),1048576(mtdoops),-(tlpart) of length 56 left=4003 [ 0.000000] Found arg init=/bin/init of length 14 left=3946 [ 0.000000] Found env memsize=256 of length 11 [ 0.000000] Found env rd_start=0x80A21000 of length 19 [ 0.000000] Found env rd_size=0xB9249 of length 15 [ 0.000000] Found env flash_start=0xFFFFCDDF of length 22 [ 0.000000] Found env flash_size=0xFFFFDBFF of length 21 [ 0.000000] U-boot passed args console=ttyS0,115200 console=ttyS0,115200 mtdoops.mtddev=mtdoops mtdoops.record_size=131072 mtdparts=mtd-0:524288(loader), 1048576(mtdoops),-(tlpart) init=/bin/init rd_start=0x80A21000 rd_size=0xB9249 board .battery_index=0 board.gmac=1 board.dsl_afe=3 board.enet_mac=12 board.ext_intr=6 board.board_features=9 board.gpio_map=9 board.gpio_overlay=8 board.single_lan_led=1 board.srom_patch=5 board.voice_parm=1 board.wlan_config=2 left=3667 copied=429 [ 0.000000] CPU revision is: 0002a080 (Broadcom4350) [ 0.000000] DSL SDRAM reserved: 0x180000 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 0fe80000 @ 00000000 (usable) [ 0.000000] Initial ramdisk at: 0x80a21000 (758345 bytes) [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000fe80 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000fe80 [ 0.000000] On node 0 totalpages: 65152 [ 0.000000] free_area_init_node: node 0, pgdat 804716f0, node_mem_map 81000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 477 pages used for memmap [ 0.000000] Normal zone: 60579 pages, LIFO batch:15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64643 [ 0.000000] Kernel command line: console=ttyS0,115200 console=ttyS0,115200 mtdoops.mtddev=mtdoops mtdoops.record_size=131072 mtdparts=mtd-0:524288(loader), 1048576(mtdoops),-(tlpart) init=/bin/init rd_start=0x80A21000 rd_size=0xB9249 board.battery_index=0 board.gmac=1 board.dsl_afe=3 board.enet_mac=12 board.ext_intr=6 board.board_features=9 board.gpio_map=9 board.gpio_overlay=8 board.single_lan_led=1 board.srom_patch=5 board.voice_parm=1 board.wlan_config=2 [ 0.000000] wait instruction: enabled [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16bytes [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:128 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] console [ttyS0] enabled [ 0.001000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.003000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.004000] Allocating memory for DSP module core and initialization code [ 0.005000] Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0 [ 0.026000] Memory: 247000k/260608k available (3597k kernel code, 13404k reserved, 912k data, 184k init, 0k highmem) [ 0.027000] Calibrating delay loop... 398.33 BogoMIPS (lpj=199168) [ 0.049000] Mount-cache hash table entries: 512 [ 0.050000] --Kernel Config-- [ 0.051000] SMP=1 [ 0.052000] PREEMPT=1 [ 0.053000] DEBUG_SPINLOCK=1 [ 0.054000] DEBUG_MUTEXES=1 [ 0.055000] Broadcom Logger v0.1 Jan 21 2016 16:19:52 [ 0.061000] CPU revision is: 0002a080 (Broadcom4350) [ 0.061000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.061000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16bytes [ 0.062000] Calibrating delay loop... 403.45 BogoMIPS (lpj=201728) [ 0.082000] Brought up 2 CPUs [ 0.083000] Synchronize counters across 2 CPUs: done. [ 0.086000] khelper used greatest stack depth: 15316 bytes left [ 0.091000] net_namespace: 1180 bytes [ 0.093000] NET: Registered protocol family 16 [ 0.097000] [ 0.097000] *** kerSysFlashInit .... [ 0.440000] Internal 1P2 VREG will be shutdown if unused...Unused, turn it off (00008a56-00008a66=-16<300) [ 0.442000] registering PCI controller with io_map_base unset [ 0.443000] registering PCI controller with io_map_base unset [ 0.445000] khelper used greatest stack depth: 15256 bytes left [ 0.485000] khelper used greatest stack depth: 15040 bytes left [ 0.500000] bio: create slab <bio-0> at 0 [ 0.504000] SCSI subsystem initialized [ 0.506000] usbcore: registered new interface driver usbfs [ 0.507000] usbcore: registered new interface driver hub [ 0.508000] usbcore: registered new device driver usb [ 0.510000] pci 0000:00:00.0: reg 10 32bit mmio: [0x10004000-0x10005fff] [ 0.511000] pci 0000:00:00.0: supports D1 D2 [ 0.512000] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.513000] pci 0000:00:00.0: PME# disabled [ 0.514000] pci 0000:00:09.0: reg 10 32bit mmio: [0x10002600-0x100026ff] [ 0.515000] pci 0000:00:0a.0: reg 10 32bit mmio: [0x10002500-0x100025ff] [ 0.518000] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.519000] pci 0000:01:00.0: PME# disabled [ 0.521000] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.522000] pci 0000:01:00.0: IO window: disabled [ 0.523000] pci 0000:01:00.0: MEM window: disabled [ 0.524000] pci 0000:01:00.0: PREFETCH window: disabled [ 0.525000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 0.527000] khelper used greatest stack depth: 14648 bytes left [ 0.531000] skbFreeTask created successfully [ 0.532000] BLOG v3.0 Initialized [ 0.533000] BLOG Rule v1.0 Initialized [ 0.534000] Broadcom IQoS v0.1 Jan 21 2016 16:23:37 initialized [ 0.535000] Broadcom GBPM v0.1 Jan 21 2016 16:23:37 initialized [ 0.542000] NET: Registered protocol family 8 [ 0.543000] NET: Registered protocol family 20 [ 0.550000] NET: Registered protocol family 2 [ 0.566000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.575000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.583000] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.591000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.598000] TCP reno registered [ 0.605000] NET: Registered protocol family 1 [ 0.610000] Unpacking initramfs... [ 2.127000] Freeing initrd memory: 740k freed [ 2.137000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.143000] squashfs: version 4.0 with LZMA457 ported by BRCM [ 2.150000] fuse init (API version 7.11) [ 2.154000] msgmni has been set to 484 [ 2.164000] io scheduler noop registered (default) [ 2.169000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 2.198000] khelper used greatest stack depth: 14504 bytes left [ 2.216000] loop: module loaded [ 2.219000] Driver 'sd' needs updating - please use bus_type methods [ 2.227000] PPP generic driver version 2.4.2 [ 2.232000] PPP Deflate Compression module registered [ 2.237000] PPP BSD Compression module registered [ 2.242000] NET: Registered protocol family 24 [ 2.255000] BCMNAND: pReg=40000001 Cfg=15142200 CsAndNor=0 Acc=f7001010 Id=c2f1801d [ 2.263000] BCMNAND: System strap=1fff5bf 800,11,1 [ 2.268000] BCMNAND: NAND: AccControl=f7001010 [ 2.272000] BCMNAND: size=128MB, block=128KB, page=2 GiBB, spare=64 [ 2.278000] BCMNAND: Init done [ 2.282000] MTD partition(0) offset=0 size=524288 num=3 [ 2.287000] MTD partition(1) offset=524288 size=1048576 num=3 [ 2.293000] MTD partition(2) offset=1572864 size=132644864 num=3 [ 2.299000] 3 cmdlinepart partitions found on MTD device mtd-0 [ 2.305000] Creating 3 MTD partitions on "mtd-0": [ 2.310000] 0x000000000000-0x000000080000 : "loader" [ 2.318000] 0x000000080000-0x000000180000 : "mtdoops" [ 2.331000] mtdoops: Attached to MTD device 1 [ 2.336000] mtdoops: ready 0, 1 [ 2.340000] 0x000000180000-0x000008000000 : "tlpart" [ 2.370000] BCMNAND: IsBad block at off=69337088 is bad [ 2.431000] ntl_init_phase_1: adding EB 517 to bad list [ 2.598000] opentla:tldisk_partition: going to enumerate [ 2.607000] parse_bsd: tldisk header... [ 2.611000] opentla0: <tldisk: [ 2.614000] * parse_bsd: Partition 8/80 1d/0 [ 2.619000] parse_bsd: adding tldisk partition at 1/8 [ 2.624000] opentla1 [ 2.626000] * parse_bsd: Partition 88/80 1d/0 [ 2.631000] parse_bsd: adding tldisk partition at 2/8 [ 2.636000] opentla2 [ 2.638000] * parse_bsd: Partition 108/78 1c/0 [ 2.643000] parse_bsd: adding tldisk partition at 3/8 [ 2.648000] opentla3 [ 2.651000] * parse_bsd: Partition 180/3c080 11/0 [ 2.656000] parse_bsd: adding tldisk partition at 4/8 [ 2.661000] opentla4 > [ 2.669000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.676000] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) [ 2.682000] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 2.689000] ehci_hcd 0000:00:0a.0: EHCI Host Controller [ 2.695000] ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 [ 2.703000] ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM [ 2.729000] ehci_hcd 0000:00:0a.0: irq 18, io mem 0x10002500 [ 2.740000] ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00 [ 2.746000] usb usb1: configuration #1 chosen from 1 choice [ 2.753000] hub 1-0:1.0: USB hub found [ 2.757000] hub 1-0:1.0: 2 ports detected [ 2.764000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.770000] PCI: Enabling device 0000:00:09.0 (0000 -> 0002) [ 2.776000] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 2.783000] ohci_hcd 0000:00:09.0: OHCI Host Controller [ 2.789000] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 [ 2.797000] ohci_hcd 0000:00:09.0: irq 17, io mem 0x10002600 [ 2.858000] usb usb2: configuration #1 chosen from 1 choice [ 2.864000] hub 2-0:1.0: USB hub found [ 2.868000] hub 2-0:1.0: 2 ports detected [ 2.875000] usbcore: registered new interface driver usblp [ 2.881000] Initializing USB Mass Storage driver... [ 2.886000] usbcore: registered new interface driver usb-storage [ 2.893000] USB Mass Storage support registered. [ 2.899000] Registered led device: pace-5268:green:ethernet [ 2.905000] Registered led device: pace-5268:red:ethernet [ 2.911000] Registered led device: pace-5268:red:service [ 2.917000] Registered led device: pace-5268:green:service [ 2.924000] Registered led device: pace-5268:red:power [ 2.929000] Registered led device: pace-5268:green:power [ 2.936000] Registered led device: pace-5268:green:phone2 [ 2.942000] Registered led device: pace-5268:red:phone2 [ 2.948000] Registered led device: pace-5268:green:phone1 [ 2.954000] Registered led device: pace-5268:red:phone1 [ 2.960000] Registered led device: pace-5268:green:dsl2 [ 2.966000] Registered led device: pace-5268:red:dsl2 [ 2.972000] Registered led device: pace-5268:green:dsl1 [ 2.978000] Registered led device: pace-5268:red:dsl1 [ 2.984000] Registered led device: pace-5268:green:wps [ 2.990000] Registered led device: pace-5268:red:wps [ 2.996000] Registered led device: pace-5268:green:wifi [ 3.002000] Registered led device: pace-5268:red:wifi [ 3.008000] Registered led device: pace-5268:green:usb [ 3.014000] Registered led device: pace-5268:red:usb [ 3.020000] Registered led device: pace-5268:red:hpna [ 3.025000] brcmboard: brcm_board_init entry [ 3.030000] @@@ System Mac address table initialized ... [ 3.035000] SES: Button Interrupt 0x1 is enabled [ 3.040000] SES: LED GPIO 0x24 is enabled [ 3.044000] PCIe: No device found - Powering down [ 3.251000] IRQ 8/brcm_8: IRQF_DISABLED is not guaranteed on shared IRQs [ 3.263000] Serial: BCM63XX driver $Revision: 3.00 $ [ 3.268000] Magic SysRq enabled (type ^ h for list of supported commands) [ 3.275000] ttyS0 at MMIO 0xb0000180 (irq = 13) is a BCM63XX [ 3.281000] ttyS1 at MMIO 0xb00001a0 (irq = 42) is a BCM63XX [ 3.288000] Total # RxBds=1724 [ 3.291000] bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized [ 3.291000] [ 3.299000] bcmPktDma_init: Broadcom Packet DMA Library initialized [ 3.305000] bcmxtmrt: Broadcom BCM3168D0 ATM/PTM Network Device v0.5 Jan 21 2016 16:23:29 [ 3.314000] IPSEC SPU: SUCCEEDED [ 3.318000] GACT probability NOT on [ 3.322000] Mirror/redirect action on [ 3.326000] u32 classifier [ 3.328000] input device check on [ 3.332000] Actions configured [ 3.336000] Netfilter messages via NETLINK v0.30. [ 3.344000] GRE over IPv4 tunneling driver [ 3.351000] TCP cubic registered [ 3.354000] Initializing XFRM netlink socket [ 3.359000] NET: Registered protocol family 10 [ 3.377000] IPv6 over IPv4 tunneling driver [ 3.395000] NET: Registered protocol family 17 [ 3.399000] NET: Registered protocol family 15 [ 3.404000] Initializing MCPD Module [ 3.408000] Ebtables v2.0 registered [ 3.412000] ebt_time registered [ 3.415000] ebt_ftos registered [ 3.418000] ebt_wmm_mark registered [ 3.423000] RPC: Registered udp transport module. [ 3.428000] RPC: Registered tcp transport module. [ 3.433000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 3.440000] All bugs added by David S. Miller <davem@redhat.com> [ 3.450000] Freeing unused kernel memory: 184k freed [ 3.479000] mount used greatest stack depth: 14368 bytes left [ 3.678000] mdev used greatest stack depth: 14192 bytes left e2fsck 1.42.7 (21-Jan-2013) /dev/opentla4 was not cleanly unmounted, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Block bitmap differences: -46610 +46623 +46658 Fix? yes Free blocks count wrong for group #6 (7345, counted=7344). Fix? yes Free blocks count wrong (88239, counted=88222). Fix? yes /dev/opentla4: ***** FILE SYSTEM WAS MODIFIED ***** 134 inodes used (1.72%, out of 7808) 0 non-contiguous files (0.0%) 0 non-contiguous directories (0.0%) # of inodes with ind/dind/tind blocks: 10/4/0 34722 blocks used (28.24%, out of 122944) 0 bad blocks 0 large files 72 regular files 53 directories 0 character device files 0 block device files 0 fifos 0 links 0 symbolic links (0 fast symbolic links) 0 sockets ------------ 125 files e2fsck returned: 1 [ 6.506000] mount used greatest stack depth: 14104 bytes left [ 6.524000] mount used greatest stack depth: 13952 bytes left [ 9.631000] cp used greatest stack depth: 13744 bytes left mknod: /dev/brcmboard: File exists [ 12.435000] bcm_ingqos: module license 'Proprietary' taints kernel. [ 12.442000] Disabling lock debugging due to kernel taint [ 12.471000] Broadcom Ingress QoS Module Char Driver v0.1 Jan 21 2016 16:21:36 Registered<243> [ 12.480000] [ 12.480000] Broadcom Ingress QoS ver 0.1 initialized [ 12.609000] brcmchipinfo: brcm_chipinfo_init entry [ 12.708000] BPM: tot_mem_size=268435456B (256MB), buf_mem_size=40265310B (38MB), num of buffers=18921, buf size=2128 [ 12.719000] Broadcom BPM Module Char Driver v0.1 Jan 21 2016 16:20:15 Registered<244> [ 13.093000] [NTC bpm] bpm_set_status: BPM status : enabled [ 13.093000] [ 13.197000] NBUFF v1.0 Initialized [ 13.209000] Initialized fcache state [ 13.214000] Broadcom Packet Flow Cache Char Driver v2.2 Jan 21 2016 16:21:37 Registered<242> [ 13.223000] Created Proc FS /procfs/fcache [ 13.227000] Broadcom Packet Flow Cache registered with netdev chain [ 13.234000] Broadcom Packet Flow Cache learning via BLOG enabled. [ 13.241000] Constructed Broadcom Packet Flow Cache v2.2 Jan 21 2016 16:21:37 [ 13.597000] chipId 0x631680D0 [ 13.601000] Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 Jan 21 2016 16:21:23 Registered <241> [ 13.611000] Enabling SMISBUS PHYS_FAP_BASE[0] is 0x10c01000 [ 13.637000] FAP Soft Reset Done [ 13.640000] 4ke Reset Done [ 13.653000] Enabling SMISBUS PHYS_FAP_BASE[1] is 0x10c01000 [ 13.679000] FAP Soft Reset Done [ 13.682000] 4ke Reset Done [ 13.694000] FAP Debug values at 0xabb22d00 0xabba2d00 [ 13.701000] Allocated FAP0 GSO Buffers (0xABB33D88) : 1048576 bytes @ 0xAB400000 [ 13.710000] Allocated FAP1 GSO Buffers (0xABBB3D88) : 1048576 bytes @ 0xAB500000 [ 13.718000] Allocated FAP0 TM SDRAM Queue Storage (abb33d8c) : 390144 bytes @ ab600000 [ 13.727000] Allocated FAP1 TM SDRAM Queue Storage (abbb3d8c) : 390144 bytes @ ab680000 [ 13.741000] [NTC fapProto] fapReset : Reset FAP Protocol layer [ 13.748000] fapDrv_construct: FAP0: pManagedMemory=b0820650. wastage 8 bytes [ 13.756000] fapDrv_construct: FAP1: pManagedMemory=b0a20650. wastage 8 bytes [ 13.763000] [FAP0] DSPRAM : stack <0x80000000><1536>, global <0x80000600><4256>, free <2400>, total<8192> [ 13.773000] [FAP1] DSPRAM : stack <0x80000000><1536>, global <0x80000600><4256>, free <2400>, total<8192> [ 13.783000] [FAP0] PSM : addr<0x80002000>, used <23824>, free <752>, total <24576> [ 13.791000] [FAP1] PSM : addr<0x80002000>, used <23824>, free <752>, total <24576> [ 13.799000] [FAP0] DQM : availableMemory 14652 bytes, nextByteAddress 0xE0004948 [ 13.806000] [FAP1] DQM : availableMemory 14652 bytes, nextByteAddress 0xE0004948 [ 13.814000] [FAP0] GSO Buffer set to 0xAB400000 [ 13.818000] [FAP1] GSO Buffer set to 0xAB500000 [ 13.823000] [FAP0] FAP BPM Initialized. [ 13.827000] [FAP1] FAP BPM Initialized. [ 13.831000] bcmPktDma_bind: FAP Driver binding successfull [ 13.837000] [FAP0] FAP TM: ON [ 13.840000] [FAP1] FAP TM: ON [ 13.968000] bcmxtmcfg: bcmxtmcfg_init entry [ 14.385000] adsl: adsl_init entry [ 14.404000] modprobe used greatest stack depth: 13352 bytes left [ 14.783000] Broadcom BCM63168D0 Ethernet Network Device v0.1 Jan 21 2016 16:23:20 [ 14.800000] ext_switch_spi_init: EXT_SWITCH_ID=0x53125... [ 14.806000] BCM53125 match... [ 14.810000] fapDrv_psmAlloc: fapIdx=1, size: 7392, offset=b0a20650 bytes remaining 8104 [ 14.819000] ETH Init: Ch:0 - 308 tx BDs at 0xb0a20650 [ 14.825000] fapDrv_psmAlloc: fapIdx=0, size: 7392, offset=b0820650 bytes remaining 8104 [ 14.834000] ETH Init: Ch:1 - 308 tx BDs at 0xb0820650 [ 14.839000] fapDrv_psmAlloc: wastage 8 bytes [ 14.844000] fapDrv_psmAlloc: fapIdx=0, size: 5912, offset=b0822330 bytes remaining 2184 [ 14.852000] ETH Init: Ch:0 - 738 rx BDs at 0xb0822330 [ 14.864000] fapDrv_psmAlloc: wastage 8 bytes [ 14.868000] fapDrv_psmAlloc: fapIdx=1, size: 5912, offset=b0a22330 bytes remaining 2184 [ 14.877000] ETH Init: Ch:1 - 738 rx BDs at 0xb0a22330 [ 14.912000] Broadcom GMAC Char Driver v0.1 Jan 21 2016 16:23:27 Registered<249> [ 14.919000] Broadcom GMAC Driver v0.1 Jan 21 2016 16:23:27 Initialized [ 14.927000] dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered [ 14.948000] eth0: MAC Address: F8:2C:18:E2:97:55 [ 14.974000] eth1: MAC Address: F8:2C:18:E2:97:55 [ 14.995000] eth2: MAC Address: F8:2C:18:E2:97:55 [ 15.026000] eth3: MAC Address: F8:2C:18:E2:97:55 [ 15.047000] eth4: MAC Address: F8:2C:18:E2:97:55 [ 15.076000] eth5: MAC Address: F8:2C:18:E2:97:55 [ 15.098000] eth6: MAC Address: F8:2C:18:E2:97:55 [ 15.113000] modprobe used greatest stack depth: 13264 bytes left [ 15.179000] [NTC arl] arlEnable : Enabled ARL binding to FAP [ 15.185000] Broadcom Address Resolution Logic Processor (ARL) Char Driver v0.1 Jan 21 2016 16:20:15 Registered <245> [ 15.356000] Broadcom 802.1Q VLAN Interface, v0.1 [ 15.416000] BCM63XX_USB USB Device not present modprobe: can't load module bcm_usb (extra/bcm_usb.ko): No such device |
See also
- Pace 5168NV-110 (Arris Global Limited) - Broadcom BCM63168
- Pace 5268AC (Arris Global Limited) - Broadcom BCM63168 (testing)
- Arris NVG448B (Arris Group, Inc.) - VDSL2 CPE Broadcom BCM63148
- Arris NVG599
- Arris NVG595
Categories:
- Pace
- Embedded system/CPE
- Embedded system/dsl modem
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM63168
- Broadcom
- Embedded System BMIPS4350
- Embedded System
- Embedded System Quantenna
- Embedded System QT3840BC
- Quantenna
- Embedded System ARC
- Embedded System 700
- Embedded System BCM53125
- Manuf Foxconn
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QT2518B
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation