Phicomm FWR-714U A1.0

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
300Mbps Wireless N NAS Router
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Phicomm FWR-714U A1.0
FCC ID
Type
wireless router
CPU1
CPU1 Type
MIPS 24KEc
CPU1 Speed
not specified
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
ESMT Model? x 2
ETH chip1
Switch
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 1 A
Connector type
barrel
Other

Default SSID: Phicomm_XXXXXX
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 795 additional devices
of which 2 are Phicomm devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 4 are Phicomm devices

Retail
FCC approval date 18 March 2013
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Phicomm device with specifications, see Phicomm.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"WR2030"????, ???, "800000436" appears to be silkscreened on the board in the photo in the FCC test report.

Default settings are per the FCC label and manual.

The default SSID pattern would appear to be Phicomm_XXXXXX (where XXXXXX is the last 6 hex digits of the BSSID [upper case letters]).