RPF Raspberry Pi 2 Model B v1.2 (1GB)
From TechInfoDepot
Jump to navigationJump to search
Single Board Computer | |||||||||||||
![]() | |||||||||||||
Homepage | Product page | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3rd Party Firmware | |||||||||||||
dd-wrt | Status Unknown | ||||||||||||
OpenWrt | Supported | ||||||||||||
Tomato any flavor | Status Unknown | ||||||||||||
Gargoyle | Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev | RPF Raspberry Pi 2 Model B v1.2 (1GB) | ||||||||||||
Type | single-board computer | ||||||||||||
CPU1 ![]() | Broadcom BCM2837 | ||||||||||||
CPU1 Type | ARMv8 Cortex-A53 | ||||||||||||
CPU1 Speed | 900 MHz ( 4 cores ) | ||||||||||||
Flash1 Chip | Brand? Model? | ||||||||||||
Flash1 Size | 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (microSD) | ||||||||||||
RAM1 Size | 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> | ||||||||||||
RAM1 Chip | Brand? Model? | ||||||||||||
ETH chip1 | Broadcom BCM2837 | ||||||||||||
Ethernet Port Count | 1-100MbE-LAN | ||||||||||||
Wired Standard | IEEE 802.3i/3u | ||||||||||||
| |||||||||||||
Expansion IF types | USB 2.0 | ||||||||||||
USB ports | 4 | ||||||||||||
USB Hub Compatible | Untested | ||||||||||||
Power | 5 VDC, 1 A | ||||||||||||
Connector type | µUSB | ||||||||||||
Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | ||||||||||||
| |||||||||||||
| |||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented RPF devices with specifications, see RPF.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: bcm27xx
OpenWrt Subtarget: bcm2710
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 15.05
Current supported version: 24.10.2
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: bcm27xx
OpenWrt Subtarget: bcm2710
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 15.05
Current supported version: 24.10.2
Please insert instructions here