Ruckus Wireless MediaFlex 7211 (VF7211)

bgn (N150)
access point
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Ruckus Wireless MediaFlex 7211
FCC ID	S9GMF7211
IC ID	5912A-MF7211
Type	access point
CPU1	Ralink RT3050
CPU1 Type	MIPS 24KEc
CPU1 Speed	320 MHz 16-bit
Flash1 Chip	STMicro Model?
Flash1 Size	? MiB
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	Micron MT48LC8M16A2
ETH chip1	Ralink RT3050
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 74:91:1A (1 E, 1 W) Ethernet OUI: 74:91:1A (1 E, 1 W)
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Other
Default SSID: V54-HOME001 (1 addl. devices) , V54-HOME002 Default IP address: 192.168.30.1 the IP 192.168.30.1 is used by 2 additional devices of which 0 are Ruckus Wireless devices Default login user: super Default login password: sp-admin super:sp-admin credentials used by 16 additional devices of which 16 are Ruckus Wireless devices
Retail
FCC approval date	09 April 2010
Country of manuf	Malaysia
Radio 1
Chip1	Ralink RT3050
Wireless interface OUI	74:91:1A
Antenna Connector Type	none specified
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Ruckus Wireless device with specifications, see Ruckus Wireless.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

There are multiple sub-models of this device.

• MediaFlex 7211 802.11n Outdoor Smart Wi-Fi Gateway (integral antenna)
• MediaFlex 7211 802.11n Indoor/EXT Smart Wi-Fi Gateway (U.FL->RP-SMA connector on EXT models only)

The Ruckus Wireless logo, "GD 16", "Asm 120-11139["<written 002>"]Rev[ ]", and "Ser. No. ["<written 415>"]" is silkscreened on the board in the FCC photos.

"100-11138-001 REV 4" (or something) is on the component side of the board.

Per the manual, the default SSIDs for this device are V54-HOME001 (WIreless 1) and V54-HOME002 (Wireless 2).