Senao SL-2511BG2 PLUS

b (B11)
Wireless Outdoor Bridge
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Senao SL-2511BG2 PLUS
FCC ID	NI3-2511BG2PLUS
Board ID	34-WIP402-A2
Type	bridge
CPU1	RDC R8822
CPU1 Type	x86-64 x86
CPU1 Speed	not specified
Flash1 Chip	Brand? Model?
Flash1 Size	0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Realtek RTL8019AS
Switch	Kendin KS8995
Ethernet Port Count	2-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	PCMCIA (16-bit)
PCMCIA slots	1
Power	48 VDC, 0.7 A
Connector type	Ethernet (PoE)
Flags: amplifier, outdoor
Other
Manuf/OEM/ODM	AMIT WIP-402
Retail
FCC approval date	07 February 2003
Country of manuf	Taiwan
Radio 1
Radio1 module	Senao SL-2511CD PLUS EXT2
Radio1 module IF	PCMCIA (16-bit)
Chip1	Intersil ISL3873B
Chip2	Intersil ISL3685
Wireless interface OUI	none specified
Antenna Connector Type	MMCX
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented RDC SoC's with specifications, see RDC.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Senao device with specifications, see Senao.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"34-WIP402-A2" and "Ver. A2" is silkscreened on the main board.

This would seem to be an AMIT WIP402.

FCC photos show the device with a Kendin KS8995 switch.

• Case witch Senao SB-24-100 amplifier (optitional)

(DC-Converter, DC-Injector, external lightning protector)

NetBEUI protocol supported.

Models

Outdoor Wireless Bridge

• Senao SL-2511BG PLUS
• Senao SL-2511BG2 PLUS
• Senao SL-2511HS PLUS